now i am on new project very soon ,

how to tame the high speed monster ZTE MF680 + Panel antenna

you refering to how to connect Panel to ZTE MF680 in naked form ?

then External antenna is there, u dont need the cover casing hole,. just connect your Panel with TS-9 cnvertor, then straight cucuk saja only

seems like a great target to replace 1043ND
External Power Supply = 12VDC / 1.5A

---

Added on November 8, 2012, 1:04 amwow Openwrt Load balance confirm working in a blink and amazing effect,.

dual usb port is really a catch,..

now the price is

This post has been edited by chuahcs79: Nov 8 2012, 01:06 AM

the 1043ND usb port have under power issue,

not the mobo in router, the usb port issue,.

that's why strongly not suggested

the older batchd ont have such issue, only newer batch,..

can always consider 4300 for sure

cheap cheap

get 4300 and see

should be a lot better than 1043ND

oh, though the 4300 is dual wifi band with 3 external antenna

i believe soon u will have, it is just matter of time

u need to click the circle part then u can enter second set DNS

[attachmentid=3145526]

if u did correctly,

it should look like this :

[attachmentid=3145556]

u can go to -> system -> backup/Flash Firmware -> performs reset -> redo all the setup in openwrt

nope, that's quite impossible,

just make sure the router + modem is not been moved or vibrate shifted a bit,.

u need to find perfect spot

well it is up to personal choices,

some user feed back V2 is barely even warm, so temperature wise confirm is winner

Found out the best Setup in my area is like this :
i open the router top cover, upside down it on top of aluminium cooler pad and open the sim card cover make sure either the antenna hole or memory card slot facing down on cooler pad
and speed been 15~17Mbps stable
(tried open ZTE MF680 both cover but speed & signal is decrease remendous )

Combination : ZTE MF680 ( tweaked 33tx ) + TL-MR3420 with Openwrt( top cover open upside down )

[attachmentid=3145585]






i guess it is due to the cooler pad aluminium reflecting signal for the ZTE MF680
so using the powerful fan wont decrease connection speed

Garages sales many Seller, take your pick

1 ) E372 maxis set is Locked -> to maxis sim only

2) lock modem of course can use with any 3G router as long as the sim card is correct ISP

well u practically doesn't need the QSS button much anyway,..

V2 running less heat much cooler, dialing modem also faster too,

if u are using V2, u can consider upgrade your usb modem

usb modem never explode,

only chipset get fried

so far so good, speed is superb on 33tx

tp-link TD-W8968 = 300Mbps Wireless N USB ADSL2+ Modem Router, the tp link stock firmware come with it dont support 3G with the usb port

tp-link TD-W8968 = 3G router, u need to plug in your own 3G usb modem into it

This post has been edited by chuahcs79: Nov 9 2012, 06:44 PM