first of all u are using pc or laptop ?

any wifi connection ?

why not u try this:

your router is fully flash with open wrt right ?

just not yet updates list and install packages correct ?

u can connect your lan cable to router yellow port as usual,

then use your browser to login 192.168.1.1

no password needed for first time, just direct click login

after that set your wifi first, under network -> wifi,



then after wifi set and done, reboot the router,

try to use your laptop wifi to connect router first login 192.168.1.1 in browser

then after wifi fully connected,

unplug the lan cable, and share your 3G modem connection via lan cable in laptop under network,

and plug the lan cable into the router blue lan cable port

then click updates list

and proceed to install packages

and follow by reboot after all packages install

and then login 192.168.1.1 again and set your wan 3G connection

then enjoy

well u dont have to set anything if u connect your wifi to router and share lan cable out to router blue lan port to updates list

anyway, glad u work it out,.

Make sure u able to updates list, and install all the packages

◦comgt
◦kmod-usb2
◦kmod-usb-ohci
◦kmod-usb-uhci
◦kmod-usb-serial
◦kmod-usb-serial-option
◦kmod-usb-serial-wwan
◦kmod-usb-acm
◦luci-proto-3g
◦usb-modeswitch
◦usb-modeswitch-data


then reboot first before u try to set wan or other setting

5 days + without DC,. only with openwrt

[attachmentid=3124448]

well i dont hav any sierra, so i am not very sure,.

but u can try out if u want, flash it back to stock firmware if sierra not working

---

Added on October 28, 2012, 12:55 pmafter all the packages installed,

just reboot the router

then loging 192.168.1.1

set the Wan,

the modem device will have usb1 or usb 0,

usb 1 will works for E372 and ZTE MF680

This post has been edited by chuahcs79: Oct 28 2012, 12:55 PM

a bit weird for sure though,

as long as it come out at modem device then is good

i try a few time, after inistalled all packages , reboot and it is all under modem device pop outs though

i personally try a few time myself,

after install all the packages, and reboot,

the modem device will auto have the usb0~usb2

just wondering why how come they dont see it

yes it support E367 huawei

---

Added on October 28, 2012, 4:12 pmdont have anyone in particular but a few selle rin garages sale who selling it,

depends on whethe ru want V1~V3 or V2

---

Added on October 28, 2012, 4:13 pmu have any other internet connection ?

or only this 3G connection ?

This post has been edited by chuahcs79: Oct 28 2012, 04:13 PM

do u have any other internet connection or only this 3G connection ?

u connect to router with a pc or laptop ?

using pc or laptop ?

i can assist you if u want,

i can assist you in Team Viewer

your pc have any wireless adapter ?

that firmware version of the open wrt is the most user friendly ever,

the rest of it short a lot of thing including web interface,.

guess u have to try the Kizwan method using putty to interact with the router

90 cfm , but how many Am or V the fan need ?

still think direct modify it to connect AC power much easier and take so much space

i personally using 1.1Amp ~ 3.0Amp,

so anything lower than 1Amp consider low power for me,

as i am using Server fan, not the normal pc casing fan

am sure is very high cfm,..

You're most welcome,

remember sometimes the "feng Shui'' of router is very different in every corner, due to the angle of your usb modem

one more thing: best signal spot doesnt guarantee best speed

while best speed spot doesnt guaratee best signal

This post has been edited by chuahcs79: Oct 29 2012, 05:14 PM

also did u follow the first post on how to setup your router in video tutor ?

there is video tutor, on how to setup your router

---

Added on October 29, 2012, 6:22 pmstep already listed in first post

and been pm to you too

these step all is by Kizwan,

u also can pm Kizwan


or


Checking MR3420 log to know your modem Device of Wan setting on Open WRT BY KIZWAN




This post has been edited by chuahcs79: Oct 29 2012, 06:23 PM