Cutout meaning can hear that distinctive vtec kick in sound? Hahah how to get that?

cutout meaning the exhaust exit after the header before the muffler.
Arospeed makes an exhaust cutout valve that's available locally.

Me, sudah bosan dengar itu vtec bunyi. now quiet only.. huhuhuhu

exhaust cut out basically allows u to have a quiet and loud setup whenever u want...
one thing i dont like about the aerospeed cutout is that when closed...its not 100% sealed... theres still a "ring" around the flap that allows the exhaust gas/noise to pass through...
anyway...heres a vid of mine.. pic of it in the vid as well

The loss seems significant because of the L bend I think.
Still looks good. I still prefer peace and quiet though. 

could also be bcoz it was just 1 single run (usually best to get 2-3 runs for a better average)...that n also 2.5" going into a 2.3" muffler...

but it does feel heavier and less rev-happy with the cutout closed...

anyway....after engine put back together, gonna get crome-d and will prolly do another comparison with a few runs instead of just 1...

hmm
driving as usual lo...just cant seems meter water temp fuel level all those only...
lucky still have movement and engine still can start lol

All carried over engines with minimal change in outputs???

Is that the way all-new Hondas are going to be???



All-New Honda Civic Launch Event Gallery

for header go for the Skunk2 Alpha.. about RM1.8k and for ur B16A.. 2.3" with single bullet and 5Zigen Border 304 Speed.. aka the one with the Race Only (RO) tag.

best muffler for VTECs imho... the sound is so addictive

my setup is a custom 4-1 header with 2.5" pipe, single bullet... no muffler (cutout open aka loud mode) or Spoon Street muffler (cutout closed aka Silent mode)
coz the K20A-R engine is expensive... believe me i wish i had the K in my hatch...hahahahah

no FN2-R groups on facebook? i thought theres one right?

wats yer list of mods and how much power u making?
considering the list of mods.. yeah id say pretty worth it...but hes been trying to sell that car for a LOOOONNNGGG time already... problem with K-swaps is that its not easy selling the car with the K in it.. not many people have that kinda cash in hand... best is to sell the engine and go back to B series for an easier sale. either that.. or sell the car at the car's normal market price...not taking the cost of the engine into account.

noisy is the name of the game for VTECs HAHAHAHAHAHAHA

skunk2 alpha i meant the header only... never bothered to find out about the rest of the system...hahhaha...

there was a dyno test done on HT.... the skunk2 was consistent throughout.. vs some other replica headers like toda n hytech...it didnt come up tops.. but still pretty consistent and decent numbers.

n i love my cutout.. done by the ex-owner...superbly functional... only problem is when ur travelling next to a wall on ur right with the cutout open...the sound really bounces back to u...lovely...but deafening at the same time..

Spoon street exhaust is pretty restrictive. I have a friend with a b18c ek with it. also sluggish compared to race exhaust. It's a sacrifice for noise control

Good luck with crome. You should easily exceed that 200hp mark easily when doing it.

---

Added on July 16, 2012, 4:37 pm

Reason why I think it's dashboard only based on what you said is because connections like fuel level, is direct to fuel tank level sender. It doesn't go anywhere else, so if you lose connection to that, it's likely the meter connector got loose.

Header 4-2-1...??so normally where should i buy...used condition or new 1... coz i see new like er replica 1 

4-2-1..brand new RM1.8k from my mech... can check with chris at pentagon racing for his prices since hes the official distro for skunk2

for header go for the Skunk2 Alpha.. about RM1.8k and for ur B16A.. 2.3" with single bullet and 5Zigen Border 304 Speed.. aka the one with the Race Only (RO) tag.

best muffler for VTECs imho... the sound is so addictive

my setup is a custom 4-1 header with 2.5" pipe, single bullet... no muffler (cutout open aka loud mode) or Spoon Street muffler (cutout closed aka Silent mode)
coz the K20A-R engine is expensive... believe me i wish i had the K in my hatch...hahahahah

no FN2-R groups on facebook? i thought theres one right?

wats yer list of mods and how much power u making?
considering the list of mods.. yeah id say pretty worth it...but hes been trying to sell that car for a LOOOONNNGGG time already... problem with K-swaps is that its not easy selling the car with the K in it.. not many people have that kinda cash in hand... best is to sell the engine and go back to B series for an easier sale. either that.. or sell the car at the car's normal market price...not taking the cost of the engine into account.

i was shopping with gf today and found this car on hypertune! or my g say porntune, hahaha lots of girl in it, 
demm this car have k24a! engine bay paint already karat2, but the engine is dem nice look, like neew! very very gooding yawwww

---

Added on July 16, 2012, 8:23 pmi love this video!


cause we have vtecccc!

MSD external coil first or walbro fuel pump first...

cause we have vtecccc!

that's the best way..its better to fine tune the available engine rather than building new problematic engine

Another guy who runs VTEC killer cams. Who needs vtec? LOL
The guy's car is stripped out. Too bad in malaysia, we need air conditioning.

Management first.. huhuhuhuhu

wudd do u mean by this?? hehe noob a little    

wudd do u mean by this?? hehe noob a little    

stripped out. lightening. he took out all interior

at msia here cant strip all out la..later gf/wife screw you like hell not to says parents too lol

Over here they first screw you about A/C first, if you don't die from the heatstroke. 

for header go for the Skunk2 Alpha.. about RM1.8k and for ur B16A.. 2.3" with single bullet and 5Zigen Border 304 Speed.. aka the one with the Race Only (RO) tag.

best muffler for VTECs imho... the sound is so addictive

my setup is a custom 4-1 header with 2.5" pipe, single bullet... no muffler (cutout open aka loud mode) or Spoon Street muffler (cutout closed aka Silent mode)
coz the K20A-R engine is expensive... believe me i wish i had the K in my hatch...hahahahah

no FN2-R groups on facebook? i thought theres one right?

wats yer list of mods and how much power u making?
considering the list of mods.. yeah id say pretty worth it...but hes been trying to sell that car for a LOOOONNNGGG time already... problem with K-swaps is that its not easy selling the car with the K in it.. not many people have that kinda cash in hand... best is to sell the engine and go back to B series for an easier sale. either that.. or sell the car at the car's normal market price...not taking the cost of the engine into account.