Any experienced no Maxis signal issue? I experience it twice yesterday, it drain off all my battery to try to locate the phone signal. It can resolve after restart the phone, and it have 3 bars signal now. (fyi, my phone still v).
maybe maxis line got problem with ur modem. what version u use? try upgrade firmware. have u try network mode to use GSM only?
@rain: What I mean is, once you turned HSUPA off (which was what you did), the H will no longer show as you are NOT running H both ways any more. Only one way (down).
Is random Shutdown no reboot. They say is firmware problem.
When it shut down, will it be hot? One of my friend experience this also..which always shut down itself..and the phone is hot.. He is using Lite'ning ROM v6.1
Security flaw discovered in AT&T's Galaxy S II lock screen
BGR has come across a security flaw limited to AT&T's Galaxy S II where the secure lockscreen can be bypassed without having to enter the password using a simple trick. Most of you will be aware of the pattern and password lockscreen options available in Android, along with the regular non-secure swipe lockscreen. They require a specific pattern or a number to be entered to unlock the device. With this little hack, however, you can easily bypass either of the two locks.
As you can see in the video above, all one has to do to bypass the lock is wait for the display to timeout on its own and then press the power button. This removes the previous secure lockscreen and replaces it with a standard, non-secure lockscreen. Depending upon what you store on your device, you may think of this as trivial or a matter of national security. Either way, you'll be glad to know that Samsung and AT&T have acknowledged the issue and working on fixing it. We received an official statement from Samsung regarding the issue. See it below. Samsung and AT&T are aware of the user interface issue on the Galaxy S II with AT&T. Currently, when using a security screen lock on the device, the default setting is for a screen timeout. If a user presses the power button on the device after the timeout period it will always require a password. If a user presses the power button on the phone before the timeout period, the device requests a password – but the password is not actually necessary to unlock it. Samsung and AT&T are investigating a permanent solution. In the meantime, owners of the Galaxy S II can remedy the situation by re-setting their time-out screen to the “immediately” setting. This is done by going to the Settings->Location and Security->Screen unlock settings->Timeout->Immediately.
» Click to show Spoiler - click again to hide... «
Security flaw discovered in AT&T's Galaxy S II lock screen
BGR has come across a security flaw limited to AT&T's Galaxy S II where the secure lockscreen can be bypassed without having to enter the password using a simple trick. Most of you will be aware of the pattern and password lockscreen options available in Android, along with the regular non-secure swipe lockscreen. They require a specific pattern or a number to be entered to unlock the device. With this little hack, however, you can easily bypass either of the two locks.
As you can see in the video above, all one has to do to bypass the lock is wait for the display to timeout on its own and then press the power button. This removes the previous secure lockscreen and replaces it with a standard, non-secure lockscreen. Depending upon what you store on your device, you may think of this as trivial or a matter of national security. Either way, you'll be glad to know that Samsung and AT&T have acknowledged the issue and working on fixing it. We received an official statement from Samsung regarding the issue. See it below. Samsung and AT&T are aware of the user interface issue on the Galaxy S II with AT&T. Currently, when using a security screen lock on the device, the default setting is for a screen timeout. If a user presses the power button on the device after the timeout period it will always require a password. If a user presses the power button on the phone before the timeout period, the device requests a password – but the password is not actually necessary to unlock it. Samsung and AT&T are investigating a permanent solution. In the meantime, owners of the Galaxy S II can remedy the situation by re-setting their time-out screen to the “immediately” setting. This is done by going to the Settings->Location and Security->Screen unlock settings->Timeout->Immediately.
your lust and desire will be the main problem to dictate whether the phone can last u 3 years
zZz.. .i want the phone to last for at least 3 years......headache on which to choose...either samsung or sony ericsson...recommendation please....im a light user...careful also.. ..hehe....samsung or sony ericsson...after that must choose whether arc s or galaxy s or galaxy r or infuse 4g.... ...haiz...comen pls