Erks...I dont c any pics there

This ones..Care to explain more..as stated above in my previous post..


This post has been edited by nightzstar: May 11 2006, 05:00 PM

Anyone can help answer my question please

There is many 4-pin molex connector right.Assume that ur psu has 3 4-pin molex connector....so how do we know we plugging the right 4 pin molex from hardware to the 4 pin molex from psu? Or isit juz plug the 4 pin molex from the hardware to any 4 pin molex connector from psu...I am kinda confused and hope the sifus here can enlighten me please...

dat should be it. but make sure the yellow wire on the molex is alwiz the nearest to the side panel.. at least, dat applies to most of the hardwares esp optical drives. hope dat helps.

Icic..thks for ur explanation. Now i know wat to do ..Going to do some mod on the useless pc.. I tried to take the molex pin using head flat screw..so far olni succeed in taking out the yellow wire...man it is so hard coz the pin inside the molex is moving whenever i want to push the fin inside.

This post has been edited by nightzstar: May 15 2006, 10:07 PM

wheee~ gd luck then. coz even when I'm using the molex remover, i still struggle to detach those wires.. mebbe coz I'm too a noob in mods.. in ya case, a screw-driver...

Whoa omg....I tot using the special molex remover shud be an easier job? it took u how long...did u finally succeed in taking out all the wire?Me until now olni the black ones..there is another two havent take out

stock molex are indeed one tough b****es... but i found it easier to remove the vantec ones... btw, my 1st sleeving job took my 9 hours to complete (my own rig of u search it up to view it) and the 2nd one, last weekend, did for my fren, took my 7 hours. both, requires sum help from other ppl. havent try to do it all alone.. pro modders sure can do dat wif not much of a deal ryt?

If it's really that hard, then I suggest usin' tweezers.

But after all, it's practise & more practise which makes som1 perfect. So keep on modding

Tweezers? Where i can get it? How it does look like?

it's a small thingie taht you can use to pick tiny things up
it's got a taper that goes smaller at the "usable" end.



never mind
a pic wud explain better

Oic...tat is it...Icic thks for the pics ...can bought from hardware shop?

dis thing called twizer rite?

yeah...its a tweezer... and u can buy it from pasar malams.... usually sold at stalls that sells those hairbands/hair clips/ nail cutters etc.

owh..typo.. tweezer

It's act easy to come by but get a gd one @ hardware shop lah. I've tried those sold @ roadside stalls only 2 see the nip easily bengkok.

IDEALTEK is a vry gd brand frm Switzerland but quite pricey. I got frm laboratory stuffs supplier. If not mistaken RM 20 - RM 30 (depending on type)

Here's the link of the manufacturer : >>Link<<

buy the easy grip molex and u will get the molex removing tool...only rm12 from xboxmy...

u realy gotta mark his word man... if putting that aside, the spiral plastic sleeve is ya best bet..

buy the uv stuff from china lol...


see her vampzone


this stuff more glow and very nice better then the vantec lol...