QUOTE(Baronic @ Nov 9 2011, 10:41 PM)
Someone just told me the note has the dame battery size as the s2 despite the mah difference can anyone confirm or deny? Id like to put that battery in my s2 if its true lol
battery... benny888 already mentioned earlier when he got his set -- does not fit. bigger sized.
QUOTE(Baronic @ Nov 9 2011, 10:28 PM)
Whats so special about the s pen / screen that the pen cant use on other devices? Not connected by wire or anything also. Im considering getting this device but my question on the camera remains unanswered hmm
if i'm not mistaken, the pen should be based on Wacom's technology (or sth similar). From
wikipedia:
QUOTE
Wacom tablets use a patented electromagnetic resonance technology. Since the tablet provides power to the pen through resonant coupling, no battery or cord is required for the pointing device. As a result, there are no batteries inside the pen (or the accompanying puck), which makes them slimmer.
Under the tablet's surface (or LCD in the case of the Cintiq) is a printed circuit board with a grid of multiple send/receive coils and a magnetic reflector attached behind the grid array. In send mode, the tablet generates a close-coupled electromagnetic field (also known as a B-field) at a frequency of 531 kHz. This close-coupled field stimulates oscillation in the pen's coil/capacitor (LC) circuit when brought into range of the B-field. Any excess resonant electromagnetic energy is reflected back to the tablet. In receive mode, the energy of the resonant circuit’s oscillations in the pen is detected by the tablet's grid. This information is analyzed by the computer to determine the pen's position, by interpolation and Fourier analysis of the signal intensity. In addition, the pen communicates other vital information, such as pen tip pressure, side-switch status, tip vs. eraser orientation, and the ID number of the tool (to differentiate between different pens. mice, etc.). For example, applying more or less pressure to the tip of the pen changes the value of the pen's timing circuit capacitor. This signal change can be communicated in an analog or digital method. An analog implementation would modulate the phase angle of the resonant frequency, and a digital method is communicated to a modulator which distributes the information digitally to the tablet. The tablet forwards this and other relevant tool information in packets, up to 200 times per second, to the computer.
if really magnetic... one does not even need to let the pen touch the screen... holding the pen a few mm from screen should also work.
This post has been edited by mydragoon: Nov 10 2011, 08:33 AM 
Nov 10 2011, 07:43 AM
Quote
0.0262sec
1.01
6 queries
GZIP Disabled