Hi All,

First time posting here.I am the proud owner of first edition MyVi. I bought it from my sister.

Problem : My ABS and handbrake lights always on.

I have done some research from LYN archive and from Uncle Google. Most of them saying that this usually happen after they wash their car or have a new tinted on.

I did bring my car for a wash but at the time the lights is already on.  So I bring to workshop just to ask what is wrong. Then they check and say sensor failure on both of my back tires. Need to change to a new one. And the new one come together with bearing. So have to buy 2 set of sensor with bearing. 

Then I said I go back home think first. Anyone having the same problem and solve it before?

oh ya.. if change all the handling components in myvi.. the car will gain a lot of aded weight or not that much until the driver can feel the difference..?

Rim and Suspensions....I think Yes...maybe you could ask those that modified it, Maybe you can get an accurate info
No idea if can feel the difference but definitely the weight would be increased and also fuel consumption would be higher

Thanks cybergear03,  fixed the problem at the accerories shop with an override at the hannd braks.

Hi All,

First time posting here.I am the proud owner of first edition MyVi. I bought it from my sister.

Problem : My ABS and handbrake lights always on.

I have done some research from LYN archive and from Uncle Google. Most of them saying that this usually happen after they wash their car or have a new tinted on.

I did bring my car for a wash but at the time the lights is already on.  So I bring to workshop just to ask what is wrong. Then they check and say sensor failure on both of my back tires. Need to change to a new one. And the new one come together with bearing. So have to buy 2 set of sensor with bearing. 

Then I said I go back home think first. Anyone having the same problem and solve it before?

normally installing front tint for myvi will have the abs light on, no problem, after a day or 2, when the water dry up will be back to normal

Didn't had this problem before but maybe my suggestion to send it to Perodua Official Service Centre to get it checked and identify what's the problem instead of sending to the workshops. As you know, Many workshops would just try to dig every single sen from your pocket unless it's a workshop that you have relative working there or you know the person well...therefore, the workshops out there would try to make the problem looks serious and say need to change this and that.

Maybe you could send it to P2 SC to get it checked and identify the problem then send it to the workshop after that since you might feel like P2 SC will be more expensive compared to Workshops out there

normally installing front tint for myvi will have the abs light on, no problem, after a day or 2, when the water dry up will be back to normal

@Aaron - for old myvi, I get RM60 for 350-380km. LOL

Rm60 for 350km?auto?mine rm50 350km

yah..agreed...i think the most accurate info will come from Myvians who already mod...
bt..i think it sure will deliver better handling rather than stock settings...
especially when u change ur rim...if bigger size, it definitely will affect ur FC

i don think so lb myvi fc getting any better...

been getting around rm50 for like 300km in average..

viva and vios getting around rm50 for 350-400km in average..

Exactly
Aaron, It all depends on your foot actually. For me, RM 50 I could go up to 350KM + City drive mostly. Type of petrol does play a part too. Different brand of petrol I get different millage.

Shell -> RM50 -> 320-330KM
Petronas -> RM50 -> 350KM
Esso -> RM50 -> 360KM+

But I pump Petronas mostly since it's near my house

Not too sure about Shell. Have been using Petronas for more than 10 years. Then switch to Esso in the last 2 years. Found that using Esso, car has better power.

Yea because in my own opinion the original horn is kinda "Girlish" or would I say "retarded" lol. No offense to anyone ya
Elegance full bodykit will be around RM1000. While SE there's no bodykit. it's only bumper. I've checked the rear bumper price as I wish to change to the SE rear bumper. It cost around RM710 including spraying. This price was quoted by P2. It's quite expensive lol so I just decided to continue and use the Elegance Bodykit

bro, which p2 sc you ask?

hi all..another problem i notice about my LPLB myvi is the multimedia unit seems sometimes to be able to play the DVD and sometimes cannot...

anyone know which SC is recommended in penang?

Hi,

Curious to know if the Myvi's Multimedia set can be connected to rear reverse camera? Anyone done that before?