Thats the prob, the psu covering the holes... any suggestion?

yeah, zeus 750watt got longer PSU casing...no other choice, either route the wires normally (through in front of the mobo), or have to punch other new hole for the cables...

Just a thought. If going to punch the mobo tray to hid wiring, why not punch the PSU instead? HAHA. then the wiring instead of coming out from the back, come out from the side straight to the mobo tray hole.

Won't work if it's a modular PSU though. And i wonder if the inner components of the PSU will allow that.

cutting a hole on the PSU will void it's waranty ....i rather void the "warranty" on the casing .....

Ahhh. haha.

Do PSU's fail? haha. but yeah, a 750W PSU ain't gonna be cheap. LOL. But it;s will be mighty neat. no cable visible at all near the PSU.

Nice idea never thought of this before. Gonna find some chapalang / over-warranty PSU to try

That really need luck on the orientation of component with the PSU to make such mod ..

sometimes the heatsink within PSU might get int the way to make a clear opening for cables to go through on the other side ..

but that most likely to happen on cheapo PSU coz it has minimal components ..
those high end PSU are really compact ... big big component packed within small housing ..

You mean most UN-likely to happen for cheapo PSU? haha

yah ... most likely cheapo PSU got more room inside .. for alteration of cables ...

just start changing to my new mobo yesterday..n try to oc to 3ghz

cant do cable management..will but back in the case

Was that suppsoed to be an example of cable UN-management? hahaha

the airflow of the case not so good for oc purpose..so go for open air

Any sugesstion for cable management of Raidmax smilodon casing? with ip35-pro mobo?

that's off topic for this thread ler...

ssssssooommmeee mmooorrreee

@samftrmd
why u didn't hide that cable..

This post has been edited by sukatra_aicaca: Apr 4 2008, 05:27 PM

Hi all, I was just redo again the cable management for my casing due to change to the new mobo~






Wish to have some opinions from u guys to improve my management skills, thanks!

izzit the proc cooler suppose to be like that?? sees like wrong put wor..

I purposely put like that, coz the cooler is blocking the NB.. no choice but have to installed like that...
btw, is i put it vertically or horizontally?

It stills works on horizontal orientation but it works better at vertical ..

as for your cables, probably sleeving and arranging those cables that connector to the mobo at the bottom of the case ..

The thing with cable management, try to make it neat by using one to two colors of cable if possible ..

Even if u are working on UV effects, more than two colors are just messy around with the color theme only .. usually end up messy UV outcomes ..

btw, probably u could remove the fan grill of exhaust fan and replace with a standard one .. that piece of grill seriously blocks lots of airflow ..