yup its mixed with pearl..... my engine and the intercooler will spray later....

More Racun....

Bought this EL for RM99 at GC motorsport at Sunway

---

Added on November 26, 2011, 11:18 pmyup i will be there about 1pm

---

Added on November 26, 2011, 11:19 pmMao interfoller HAHAHAHA



This post has been edited by mxsteven: Nov 26 2011, 11:19 PM

All this scam products are not backed up with chem reaction table chart so i wont go for it because i dont think it will last.... there is lotsa such products out there but yet no chem chart reaction proof coz they cant proof it else bogus no ones will buy.... simple facts.

most of them cannot explain and the product is actually teflon coating....Teflon process, the high temperature - it's not a matter of "can't be easily achieved," it is impossible.

Teflon liquid protection normally would last 60 days to 6 month if no UV interference ...

most of the products claim its own chemical instead of teflon.... Dupont stop this products after being issue law suits

---

Added on November 27, 2011, 12:54 am3M - uses a 3 step technique wherein a mild abrasive is used to clean and polish the surface, then a synthetic resin is used to perapre the surface and lastly the glaze is used to shine the surface. IMHO and as per the information given to me by Paint specialists, results in cutting of the clear coat by about 5-7 microns. factory finished clear coat surfaces are normally about 40-50 microns and the mild fine liquid rubbing compound cuts off a bit of this clear coat which IMHO isnt very desirable. secondly helpless against Bird droppings. had done 3M coating on my sx4 and a bird dropping resulted in a cracked up kind of surface on the clear coat. this is a Good to have product

Waxoyl - Again a 3 Step application albeit a Much better technique wherein a synthetic resin is applied to the paint to prepare the surface, a gloss resin is applied to shine the surface and finally a 100 Plus polymer paint sealant is applied to seal the surface. by experience i have observed that the shine lasts upto 2-3 years and provides effective protection against bird droppings which are corrosive in Nature and leave a cracked looking surface on the paint. However the bird droppings need to be washed off the surface within 6-8 Hours for good results. water keeps beading on the surface even after 24 months of application and in my Humble opinion this is a must have product

Dupont teflon - a Single step system wherein the vehicle is cleaned and then the teflon applied to the surface, let to dry to a haze and then shined with an orbital Polisher. very difficult to get genuine Dupont teflon and most of the time dealerships and detailers use either 3M liquid wax or any other automotive wax and say its teflon Genuine Dupont teflon comes in small bottles of 50-100 Ml each for a specific application and costs about 1045/- or so. if someone tells you that he will do a teflon coating demand to see the packaging of the product. in fact a few years ago when my friend did teflon coating for his scorpio, little did he know that the dealer would spray an additional coat of clear coat on his car and call it teflon!

Jewel Ultra Diamond Brite - Techinical specifications of this product look impressive and on par with waxoyl. the only hitch is that it is available only in Chennai as of now!

source BHP team

This post has been edited by mxsteven: Nov 27 2011, 12:54 AM

heat also will kill florescent element...

---

Added on November 27, 2011, 10:59 amWaxoyl.... no idea

This post has been edited by mxsteven: Nov 27 2011, 10:59 AM

wow u have a vivid fantasy hahaha

HAHAHAHAHAHAHA lolssss.... now gantung silver bumper.... good idea to keep the bumper lols

how much current from the battery does anyone expect to get 1hp extra HAHAHHAHA.... 1kW = 1000Watt @ PF efficiency 1.0 where 1000W/12v = 83Amps just for 1KW HAHAHAHAHA and where does the air compress? there is no compressor lolsss no compressor means almost 1:1 air velocity = NOTHING

I changed to R3 bumper because it is proton design... never want to be any other thing.... the ori bumper is obstructing my intercooler and my oil cooler

BOT or TOB?

Budget On Turbo

or

Turbo On Budget

I need the Brake servo!!!! can fit to my Waja? what servo izit?

---

Added on November 28, 2011, 7:36 pmOhhh BTW today unexpected TT at USJ 1 is quite successful so many member turn up hahahaha

This post has been edited by mxsteven: Nov 28 2011, 07:36 PM

Just let me know how much... pm me.. coz i need it IF it can fit my waja

Budget BOT project almost done..... after this will evaluate and see then only i will let u guys know....

Targeted price RM3k with TD04 + Intercooler. Stainless steel piping... only exclusive for Lowyat member.

so far planning on 4G18 and Waja Campro... others car is welcome but i have to see 1st... i would call this BOT = Budget On Turbo hahahahaha

---

Added on November 29, 2011, 7:21 pmu spend nothing on ICE.... lolssss see Elton when kena racun 1st day terus Audison amp edi hahaha

This post has been edited by mxsteven: Nov 29 2011, 07:21 PM

yeah there is Installment plan because it is not for display only... it is meant to be INSTALLED

---

Added on November 29, 2011, 11:39 pmAlso can but a bit more expensive because have to design narrow header.

This post has been edited by mxsteven: Nov 29 2011, 11:39 PM

antique but u know how to use or not!!!! lols try to use manual sriping... i DARES u

buy from halfcut laaa hahaha

ok lah if from mitsu..... but yet i love sumitomo more.... get Nissan ones cheaper

just do it with nightstalker....

---

Added on November 30, 2011, 9:04 amCredit card plan later i will see how ok... maybe can but use fren shop one lah

This post has been edited by mxsteven: Nov 30 2011, 09:04 AM

just stay tuned here....now finalizing the turbo and we will see how budget we can go...