hihi,anyone try b4 TP-Link 901nd set as repeater and support VLan600 Hypp TV Device?

hi, i followed the guide "set huawei HG655a with custom router" (my router is TL-WR1043ND)
and it works but the only one not working is IPTV, how to fix that?

Pls post the screen capture of the HG655a on the VLAN settings...

http://stanleytiang.blogspot.com/2011/08/u...using-your.html

i follow this guide completely.
so the setting of Vlan tagging is same

now working tonight screencap

Stanley does reply in his post below mention VLAN will not available if you use your VDSL directly as router.
So IPTV will not work.

I think best is to find good replacement for VDSL modem that has Bandwidth control+wifi+Vlan enable.

hmm got normal guide how to re-config back my modem like those normal technician do? i google can't find so i only can take this closest solution first to online, TV side because my dad want to watch so i need to config haha...

erm i not networking field so i totally clueless about what is VLAN, VDSL.... i only know my custom router can use IPTV ... but since that guide is route IPTV to modem so i thought it works

Guys ive already mentioned in my blog IPTV is not tested. So try it at your own risk.

because your last line got listed "Thanks timothyc for testing the IPTV. "
so i thought it is safe

anyway, still thanks for the guide.

Anyone willing to sell their ONU to me, I'm thinking of continue research on replace all device as one ONU enough.
Looking at some product now, need your onu sell to me, if you not using anymore.
No Alcatel at the moment.

No clue how to access the bridged Alcatel modem.

Got my unifi modem replaced again, this time to a new silver plastic casing with TM logo on top with front panel LED status but the inside / firmware is still the same, model is revised to HG655m ...

All the old settings still works...

Cool.. thanks for the update!

My company just subscribed to Unifi BIZ 10 with 1 Fixed IP and I am tasked to configure the line into our gateway - ZyWall 35. We had a Alcatel I-240G-P as BTU and DIR-614 (or L7NDR2000) as our equipment.

So here's the case:

We have a D-Link DGS-1210 Switch and from my little research I am able to access and configure the VLAN ports (D-Link has VID and PVID settings). So my question is that can this switch route the VID 500 and 400 (voice and data) from the BTU and connect to our own Zywall gateway, if yes, how? I'm very new to these and very sorry if I sounded like an idiot.

If not, what would be the alternative solution? How do I setup a bridge mode for TL-1043ND or any compatible router so that my ZyWall do the PPPOE dial-up (for some instance, my IT manager wanted that way).

Also, is there anyway I can access the Alcatel? I did remember TM installer did something using Putty to communicate with the BTU, the IP was 192.168.1.251.

Any help would be deeply appreciated as I am quite urgent to set everything running next week.

Thanks in advance.

You can use the D-Link DSG-1210 switch to untag VLAN 500 from BTU and connect to the Internet using the ZyWall gateway via PPPoE connection.

You can refer to the settings below. I have it running for years without issues. Connect LAN 1 from BTU to switch port 16 (in my case). Then connect switch port 15 to the WAN port of any routers.

It works for IPTV VLAN 600 too but I have never tried it for voice.

Hope it helps!




Attached thumbnail(s)

Hi, thank you so much. It will definitely help!

By the way, the PVID set to default right?

PVID 1 to all ports?

Thanks again. You really saved my day! Will try it out soon. It's way better than waiting reply from TM.

Thanks to all the guidance here.

I managed to setup everything excluding the voice. Wil observe and figure out the voice.

I think voice is unable to setup as the Alcatel BTU serve as a VOIP device which direct convert to Tone signal connect to your phone, what you can do is connect that POTS to a PBX machine for sharing the POTS, of course number only one only.

Hi Stan,

Could you confirm that IPTV on Modem HG655M will work or not if plug it to lan 1 after doing the custom router configuration? I set it up as per your blog http://stanleytiang.blogspot.com/ but both my Internet on my Asus router plug in on Modem Lan 3 and the IPTV plug on Modem Lan 1 didn't work. Have I missed any configuration at my custom router?


http://imageshack.us/photo/my-images/850/2ozq.jpg/
http://imageshack.us/photo/my-images/96/17o5.jpg/
http://imageshack.us/photo/my-images/547/opvh.jpg/

Thank you.

This post has been edited by Damascus: Oct 11 2013, 11:11 AM

This post has been edited by Moogle Stiltzkin: Jul 15 2017, 10:32 AM

anyone has any idea how to set the tm box hg655m to directly connect to maxis iptv?

Any router that support IPTV and Unifi?