hi everyone, i just bought linksys e2500,

why i cant log in with default password ?

admin : blank
pass : admin

anyone using this router?

using cisco connect also not help

edited : got it, just reset the router

This post has been edited by zeronehza: Oct 3 2012, 04:11 PM

Hi everyone.

Previously, I used my Asus RT-N56U to pair with Unifi's ZTE 931 modem. But after the modem adapter got problem, TM technician replaced the different set of modem for me as they said now Unifi is using this Huawei HG655A modem to all new customers, ZTE 931 no more available.

After install the new modem, the Huawei HG655A modem got no problem with the Unifi's DLink router. But my Asus RT-N56U no more can communicate/link with the Huawei HG655A. I did update the Asus RT-N56U latest firmware but still can't communicate/link with the Huawei modem.

Anyone here got similar problem? Or can anyone here kind to assist?

can someone create a gudie how to configure linksys e2500 step by step ?
ive already flash to ddwrt fw.. but still cant get it connect to internet..

hi guys, my unifi supplied router is acting up with frequent disconnects and needs resetting. Sorry I can't go thru this entire thread cos need to buy one replacement one now. which is the latest and best?

i have seen asus rt-n13u and tp link tl-wr641n being recommended.

I need a pwerful throw of the wifi. the unifi one drops 60% just going thru one wall.

Many thanks for your recommendations

im regret buying linksys... it took me a lot of time to configure it.. many recommended tp link.. its fully support unifi now..

thanks, any more comments before I go out and buy this afternoon?

necro an old thread. My RT13U keep hanging on me earlier this week and I was too lazy to go to Lowyat to buy a new router. Since I have a few TP-Link routers around (extra router we ordered from our networking at the office) I googled up using unifi with existing router and hey presto! I found this thread.

After using this guide, I would like to point out that stan001's post above is the best way to configure this. Seems that you can't use port 1 or port 4 without using the vlan tagging option. Trying to use either IPTV or PPOE dialer without tagging on these two ports would throw up an error. So just use port 2 and 3 for IPTV and PPOE dialing.

Anyways thank you stanley for this guide. Saved me a LOT of monies

Got this working on our Aztech WL557RT4 not sure if it supports VLAN since I can't find anything on its web based settings page

What I did

Connect to the HG665A
Went to Wan
Set ptm.1600 check port binding lan2 uncheck vlan tagging
Set ptm.1500 check port binding lan3 uncheck vlan tagging

For both I unchecked port binding and vlan tagging for lan1

Connect IPTV to lan2 on the HG665a
Connect Aztech WL557RT4 to lan 3

Setup aztech with our unifi username and password save settings reboot router connect

I have iptv working and aztech wl557rt4 working as router wireless router.

This post has been edited by slack3r: Nov 6 2012, 01:22 AM

You are welcome... glad to contribute back to the community as others had helped me before...

I'm using Asus RT-N16 with DD-WRT mega firmware now after the Dlink DIR-615 died not even two year of using Unifi..

after 1 day of having the connection I suddenly lost internet connection. checked huawei modem and ptm.209 says connecting and never connected

any reason for that? I reverted back to default settings but still the same issue. the dlink globe light indicator is blinking orange

VoiP phone works
TV setup box is working also can browser and watch youtube videos on the setup box so I believe we have internet connection

hi bro,
any news abt the new l7 router?

Has anyone got an airport extreme to work with the Hg650A modem?

It should work with any router.

any idea for this error..

This post has been edited by jengla: Nov 26 2012, 09:15 PM

anybody can tell me what is the IPTV dns??

can you go to your IPTV network setting and tell me the DNS please..

thanks..

Anyone can guide me on how to set the new unifi L7-N-R2000 modem WAN connection to bridge mode instead of PPPOE ?

anyone can provide Huawei HG850a User and Password?
i Have a extra new unit ~the HTTP not yet been disable .able to login 192.168.100.1 web browse~

try this
username : telekomadmin
password : admintelekom

1) Untick all Port Binding and Vlan Tagging > Save
2) If you trying to connect hypptv directly then follow this and connect your hypptv to Lan 3. Or else just tick back what you want to set it too and save.



I don't think it's possible, I have tried to do that many times but fail because there is not setting under the manual setup section.

Try this:
Username: admin
Password: hs5711Bbvl

This post has been edited by Jeremy_John: Feb 6 2013, 04:01 AM

anybody can give me a good router to replace current L7 router provided by TM?

BUT... i want find router WITHOUT wireless. Just wired router.
because I want used it at office, my office already have lot of Access Point + internet controlled by gateway server.

so that router only for internet connection between server LAN port to TM BTU only. If got only 1port router pun ok apa.

found some model on TP-Link website - wired SOHO routers, it's compatible with unifi?

or i can used my old 1port ADSL2+ modem router?


This post has been edited by akuinsan: Feb 6 2013, 07:38 PM