some bad formation (some people describe formation like fish scales which reduce the efficiency of transfer of heat) at somewhere, MUST HAVE CAP....

This post has been edited by NewGUY: Jul 26 2011, 10:20 AM

u potong, less pressure, the valve open slower....

other block tat do not have any ceramic coated, you need monitor more closely then u need a KOSO....

If x goin KOSO better take ceramic block, UMA or Hi-Speed....

some info for you guys for LC CAM

54mm custom cam suitable

57mm/58.5mm CMS,Ride-IT and Yamaha S6 suitable around (+/- 300 angle)

60mm/61mm/62mm/63.5mm Kitty suitable much higher....

---

Added on July 26, 2011, 10:43 amyour choice, u can always change block but prepare the rest of the spare parts lo...

The worst sangkut tengah jalan when you have something urgent....

This post has been edited by NewGUY: Jul 26 2011, 10:43 AM

u need bring ur helmet there and choose which you like the closes....tengok dulu la...

U call them ask for location and you can survey there have many shops at sek 7....

---

Added on July 26, 2011, 10:52 amsometimes they x understand and x like to layan thru phone....

This post has been edited by NewGUY: Jul 26 2011, 10:52 AM

they got sell this helmet....

then you go at sek 7, TT jaya, call this

TT Jaya

ur 2T open slow is it? and you go long distance never put 2T in petrol?

BTW, I jammed panas 1st bike modded Y80


this bike jammed back tire will lock 1, no need emergency brake, just need to balance.....

so 1.1 psi make the valve open faster? or the pressure reach 1.1 psi valve oni open? i still not sure how 1.1 psi really help...

bro, can enlighten me??...

good la bcos ur block is small but depends when if afternoon 1 or 2 pm will go up some more maybe 68....

mine 57 will go til not more than 75 without fan on....

just bring all the rosak 1....

bro check whatsapp....

---

Added on July 26, 2011, 2:25 pmtraffic police right can pass la but depends

JPJ need both, x de maaf bg mu...

Small area right still accept but Selangor and KL, I really doubt...

This post has been edited by NewGUY: Jul 26 2011, 02:25 PM

where is the damage side miror? i tot tat day you have?

bro, check whatsapp and reply me.....

Ask for COD la...

is this good or no good? Just double confirm, since change to 1.1 is better is it? Bcos coolant stay in system will be more correct??

---

Added on July 26, 2011, 3:39 pmGPS speed Vs Meter Speed

http://wikipedia.qwika.com/de2en/Tachometer

It shows in Germany the error for their speedo only 4%, so we know form here the Germans drive faster than anyone of us because is a rule for them...haha..

I think Aaron mention MyVi meter more heavy,I guess maybe following this specification....

This post has been edited by NewGUY: Jul 26 2011, 03:39 PM

sorry guys, corrections the figure i mention suppose to be in bar 0.9 bar=15 psi and 1.1 bar=18psi (i think)

but here is coolant circulate around more often or just release in the spare tank?

If 0.9 bar, circulates better then y ppl want to less the circulation? So the coolant absorb more heat oni move away?

---

Added on July 26, 2011, 4:23 pmbro, try understand the effect is more better or why ppl do tat? But i think will damage the tangki in long run...

This post has been edited by NewGUY: Jul 26 2011, 04:23 PM

I know got radiator cap at top of the radiator. So far of my years modding, never heard of water valve cap....

Bro, got pic whr is this fellow located, he may c me every time but i didnt see it.....

Just bro alex was posting the upper 1, not the below 1. I wonder what you do below there....

when you get list down so can calculate the error....

wa like tat tapao MyVi challenging.....

Off topic

no wonder always my corrolla always kena myvi tapao, car meter already 175, still kena tapao...crap, thanks for the info....

go shop buy include install 100+...