I think win7 tiny is the light version of windows, got a lot of things been deleted..
BTW have u tried clearing ur cmos 1st? Whats ur CHIV Formula bios version? If its start with 3xxx then ur using the wrong version of bios, coz its the beta bios made to enable FX cpu usage on the mobo, its not meant for normal phenom cpu's IIANM..

try to place ya ram @ red slots and 1 stick at a time then memtest d sticks again?

This post has been edited by ah_khoo: Jan 18 2012, 11:48 AM

just pulled the trigger on Asus Sabertooth....difference was RM95 but what sold me was it has 8 SATA ports as opposed to CHv which is 7

tried, pull out battery right?

bios version 1102, C5F.. im still using my x3 720.. it shud be ok without the newest bios..

---

Added on January 21, 2012, 11:59 amits already in the red slots..

a small update:

i tried installed win vista and it booted successfully!! entered windows and can run prime.. i really hav no idea why it can

ran memtest non-dos version.. doesnt indicate any problem

This post has been edited by jeff88rey: Jan 21 2012, 11:59 AM

Spend a whole day on this..

successfully unlocked my x3 720 to x4 20!! and my oc result


Attached thumbnail(s)

Woot...great hoot there sir... both shud be on par... what turn me off is d color scheme...

wecan expect great results comin our ways, yeay!!!!

i was wondering was it bekos of acpi srat table thingy (or somethg like that) causin this... neway, glad that u had it up n runnin now...

Canvcore be further reduced? It' s kinda high to my liking but nevertheless, congratz of havin it unlocked n stable. Bump a notch or 2 nb muliplier... below stock not gonna help even with high cpu clock.

Ffffuuu just got home and a bit tired, probably wont be assembling it tonite since room also a mess...probably tomorrow will transfer everything into the casing...

Btw, still waiting for the AMD Socket Bolt Thru from Thermalright....wanna use back TRUE...no money now to change new cooler...

Hi mates, how ya doing? just drop by since kunta not around. Bwahahaha...

acpi srat table? but im still not satisfied.. the best is of coz win7

cant be reduced.. any lower will cause errors.. ok, got tat bro

[WTA] I'm a newbie in OC-ing. Just for fun i tried oc-ing few days ago and cranked it up to 4.1 GHz. Then i restarted and it got till windows loading screen but then just froze up! I tried restarting the pc and it didnt start! But after like 1 day++ i tried turning it on again and it turned on perfectly but the settings went to the default. Is it my ram or the stock cooling is the culprit? My specs are below.


Specs:

M\B: Asus Crosshair V Formula.
Proc: AMD Phenom II X6 1090T.
RAM: Kingston 2x2gb 1333MHz.
GPU: XFX 6950 2gb.
Proc cooling: Stock AMD cooler.

try check ur temp..

if ur temp is ok then it shud be ur oc settings not stable

Thnanks! But the ram speed wouldn't effect it?

it will effect.. tats ur oc settings..

im using the same board, but i never encounter it reset to default.. did u clear cmos btw?

Can u give me ur settings? And yes i cleared it.

i did not use the same proc as u..

but i did set all voltage regulating to extreme.. ram at stock settings as any higher giv me errors.. mayb my hexa cant support it

I see. I will try oc-ing again and see if any problem occurs again.

After installing I quickly fired up and started to increase the memory speed to see where is the wall regarding my processor capabilities and found out that when I reach <1900mhz upon reboot it will be detected as 8GB, but as soon as >1900, only 1 dimm (4GB) is detected....change back so that the ram runs <1900, voila....dual channel 8GB...





Bios 0901, both dimms at slots 2 and 4, voltage for ram is 1.65v , CPU-NB 1.5v (nowadays 1.5v is red ) CPU Vcore is 1.425v

wow.. so high.. mine anything higher than 1700 start giving me errors.. any idea why?

this run at 1800....



CPU v: 1.4
CPU-NB: 1.425
DRAM : 1.65v

here's me CNY work.. spend my holiday during CNY for this

2344Mhz, 9-11-9-28-1T

This post has been edited by jeff88rey: Jan 23 2012, 01:04 PM


Attached thumbnail(s)