meh... almost took my blood pressure to new height during d whole process... long way to go to achieve what others did...

i left everything on stock cept d voltages & ram timing & divider. gotta need more time to max out d nb freq, cpu clock & hopefully d ram freq...

This post has been edited by ah_khoo: Nov 29 2012, 11:32 PM

spam reported...

2400 is like minimum requirement on these sticks so there nothing to shout about lah bro. but i think this is almost d max of what can be done by me. if time allowed, i'd like to test it on vishera platform but not this week perhaps. waiting for akmal aka sarahlah to sponsor me d chip...

bak kate pepatah dato: "nak kena pukol ni!!!"

it's a free combo bro, no joke. *cross my heart

good to see that bro. i really kenot brain why @ stock (4GHz) my load temp is @ 63'C with reputable cooler like TPC 812... sometihng wrong some where...

i suspect it's r2.0 boards BIOS, coincidentally 3 users including (bro cyberloner, myself & a vrzone user) having same issue. i've reported this issue to ASUS, fingers crossed. i sincerely hope this is just bios issue coz all reviews & some local users are reportin how cool Vishera is. i applied d hand job (that d one ur thinkin!!! ) @ load (63'c) my tpc was nowhere near warm.

This post has been edited by ah_khoo: Dec 12 2012, 10:49 PM

a peekture tells a thousand words. pls post a screeny with 4 cpu-z tab (cpu clock, ram freq, timing table & mobo info) as well as turbo-v with voltage & temp monitoring.

considerin d cooler + d clock @ 8 cores, i'd say that's a decent temp ledi. with h100 & silver arrow sb-e (both perform d same), am getting 59'c on stock clock with close to 1.3v. imagine am running your oc'ed setup... boiling point it'll reach...

i still think it's BIOS issue for non chv-z r2.0 boards.

woot!!! nicely done bro... gotta love d volt @ that clock!!! lookin forwards to more awesome results from u...

mine @ 1.325v bro. yeah, d lower d vid d lousier it is (assumption made based on 2 chips, mine & another secret otai, his @ > 1.325v & clock better than mine), i could be wrong thou.

d master legends has spoken...

on a serious note juice mite not be enuf so high clock + 7970. temp wise? 3.8GHz needed a > 1.45v is definitely wrong. there must be something causing d instability there.

u dont need to post so many attachment while u can printscreen with all of 'em @ 1. mate.

if possible show voltages value using turbo v @ ai suite ii, it's a very2 useful tool, listen... listen... listen... use it.

when u play with htt oc, did u lower ram frequency by using lower divider?

respect shifu lengchai for d patience...

yes sir, not otai but i think old brain of mine can givve a comment or 2 regardin thuban oc... try me but don't expect too much.

if happened ur aimin to go for asus r2.0 boards using ya 960t u mite wanna think twice coz these boards have yet to support core unlocking. am sure this can be done, depends on whether asus can help in rolling out a new bios for core unlocking. r2.0 boards are meant for bd/pd where no core unlcoking can be done. dont get me wrong, r2.0 boards are beast even for thuban/zosma, but at d moment there's no core unlocking can be done, as simple as that.

this is what i managed on one of these r2.0 boards.



This post has been edited by ah_khoo: Jan 28 2013, 09:44 PM

ah boy bro david is no new comer lah... i learn alot from him back then & i'm still learnin from him now.

This post has been edited by ah_khoo: Feb 3 2013, 09:13 PM

if u think 63'C is hot, wait till i show u near to 70'C on BD, same clock @ 4GHz with slightly higher volt @ 1.25v (BIOS set). i am using H100...

time like this i really wish there are other mobo users on diff manufacturers, asus seems to be reportin higher temp imo. or it could be d fact that i'm not able to accept d fact that BD/PD is that hot...

This post has been edited by ah_khoo: Apr 2 2013, 09:16 AM

ibt is optimized for intel imo, for amd system p95 is d only way to go... but then, stability is very subjective.

htt down clock mebe?

soli2, it's been a while since i last played with htt oc so i hardly play with ram divider nowadays.

This post has been edited by ah_khoo: Apr 15 2013, 12:00 PM

like tok guru cloudwan said, cpu nb freq can be clock way higher, ram change to 1t (command rate @ 1) too if possible. fyi thuban should be capable of at least 2600Mhz with ease (some additional volt MIGHT be needed though).

not so concerned bout idle temp thou lower always welcome. bd is the bigger beast when it comes to load temp when oc'ed.

for ya case, it could be these few factors that holdin ya oc mileage:

1. that 2 locked core is not as strong as d other 4 > nothing much u can do bout this other than feeding all more juice
2. motherboard quality
3. psu quality

i could be wrong thou...