according to this ss, what is exactly my proc temp?

A) 1 & 4
B) 2 & 5
C) 3

and what is max temp is safe for this deneb?

very high end spec there. btw i suggest you to have a look at your bios 1st. this is mine

you can find in your bios that something similar with mine which has cpu bus freq, nb, ht link, voltage setting etc. yours is BE edition. the special of BE is you can OC by increasing the cpu multiplier or cpu ratio.

other way, you can increase the fsb or htt. but we need to increase step by step in small amount. every step we need to boot into windows

This post has been edited by lengchai86: Aug 9 2011, 02:03 AM

tired of finding sweet setting for my 945. can't stable even 3.4Ghz with all other at almost stock speed stock voltage... maybe my cheap mobo can't handle such geli2 OC. only 4+1 power phase.

now trying to having fun with lowering the voltage core. 1.27Vcore 231*13 = 3.0Ghz cpu. ram 1854Mhz CL9 1.55vdimm, cpu/nb 2317MHz 1.23Volt, 230*13

blend test for almost 1 hours. hopefully stable. read somewhere got people doing 1.19vcore at 3.0Ghz stable.

update : passed 3 hours prime95


This post has been edited by lengchai86: Aug 10 2011, 02:20 AM

oredy reply you at post #249...btw i oso noob. don't know how to OC using software. thats why i OC by tweaking at bios.

This post has been edited by lengchai86: Aug 10 2011, 03:07 AM

my dream 3.7 on deneb oredy kaput... cannot stable even 3.4Ghz with stock vcore...

i'm having fun with undervolt setting now.
231*13=3.0Ghz, vcore 1.27V (stock 1.35V)
cpu/nb 1.23V, nb freq 2.3Ghz
ddr1854 CL9 1.55V
HT link 2Ghz


wow can disable core by core? disable at bios or software - turboV?

This post has been edited by lengchai86: Aug 10 2011, 05:54 PM

1st time OC, then its very good OC result. oredy reach 3.99Ghz a.k.a 4.0Ghz which is very hard for my setup to achieve. 3.9 on Deneb is like a dream for OCer. only a few can do, else didn't even reach 3.6 like me

This post has been edited by lengchai86: Aug 11 2011, 05:23 PM

you can lower your cpu multiplier and increase the fsb. then the HT link and cpu/nb freq will increase. but remember to use lower HT link freq to make sure its not run above 2000Mhz. cpu/nb freq you can run higher freq but mybe need a slightly more voltage to stable.

mine oso C3 but not BE one..very hard to stable even at 3.5Ghz, perhaps my mobo can't handle it...btw mine is 945 C3. now only enjoying undervolt setting, OC the ram speed and cpu/nb but cpu at stock clock (use lower multiplier)

wah oredy UD7? i only saw UD3 and UD5 at lyp pricelist yesterday...UD5 one RM659.

This post has been edited by lengchai86: Aug 15 2011, 03:39 PM

m4a88td evo rm400
m4a88t-v evo usb3 rm350
m5a88v evo rm425

price from jayacom

i can't find M4A88TD-V /USB3 EVO price... for now i only owned m4a87td usb3. cheap mobo only

of coz you faster one ma, you using PII 1090T sure faster, + OC 3.7GHz . i remember back when using crucial ram + amd athlon X2 + abit ax78 is faster than my current setup...faster loading into windows

then whats your current mobo. wah you so rich bought that mobo than just keep in the box. later the price oredy fall then you just start use. waste money lor...better lend to me lor then can OC my 945 deneb

This post has been edited by lengchai86: Aug 21 2011, 07:17 PM

after some review, i think many of us prefer stay with previous phenomII.. or else, move to sandy..

some mobo name it as cpu-nb offset

OC has no cure unless we retired from OC.
mine only deneb 945 lagi limited bro. x puas ram only can reach 1800, even 1800CL9 perfom lower than 1600CL8.
last time tried 1600 CL7 but i no dare to put 1.65V for da ram

in other word, you underclock it

post your CPUZ here

This post has been edited by lengchai86: Feb 21 2012, 10:41 PM

do you check at bios or software?

you just said your multiplier can go max 7.5X, how do you check this?
how do you confirm that it can go max at 7.5x?

1.448 vcore for 3.5Ghz proc is a bit high.. later your proc fried.
and please keep the HT Link at 2000Mhz or below.


the higher the NB freq is the best but, you'll need to increase the CPU/NB voltage

have you disable the Cool n Quiet? enable the cpu spread spectrum?