Anyone know how much is the transperant roof tile?

everything looks great thus far, looks like it could be a dream home when everything is done hehe. can't wait to see the final result

Do you mean the roofing sheets?

I hope too.

If you going to have internet, especially unifi, now's the time to lay in all your cat cables and necessary power points.

Already have 6 internet points, 5 cctv points (Coax and LAN). And have a empty conduit for unifi / copper to go into my server room.

server room in home?

How much does ur room door cost? Any contact?

The door, not sure the grade think is Grade 2 Nyatok solid wood. RM 330
Frame is RM 310 Nyatok grade 1.
Hinge is RM 6 each need 3
Lock is RM 88
Installation with one normal lock can't recall exact amount cause mine is lump sump whole house could be RM 70 ~ 80.
Skirting RM 0.80 per feet.
Paint on door, frame, and skirting RM 240.

So total is about RM 1090 for normal door.

If you use metal frame, is cheaper by RM 150, but is very thin. Use the thicker frame will cost more than the wood frame.

Wow got server room. Fu yoh .... Control Center liao..

Cari makan sahaja

Have not test all the cabling. Hope everything ok. Now need to get a wall mount rack too. Maybe 18U.

Solid door or Nyatoh wood laminate? Also can you please share where you got the door from. Thanks

I only use solid wood no Laminate.

Best Mode @ Salak South

Is not the cheapest, only at market rate.

This post has been edited by weikee: Oct 31 2011, 07:20 PM

build raise floor + 42U standing rack will make your server room more server room...

No need, only got few unit of Cisco router only.

Friend, your hinges seems to be a little cheap. Hope you got a good one cause solid doors are quite heavy and if your hinges are not good then the door will drop and then can't close.
Then if you change the hinges later then the frame and door not so nice already.

Just a reminder

Hello Kawan, back from East already?

The hinge is for normal solid wood single door, is good for the door, not to worry is good quality too

My entrance hinge I use ball bearing hinge, that one is not cheap tho...

This post has been edited by weikee: Nov 1 2011, 12:20 AM

normally, when a house is in renovation, can we ask the tm contractor to come and do the wiring work 1st ? like pulling cable from outside to the room.....after when i move in just plug in the cable...or when is the good timing...

Best is after brick before plastering

Bro, how much is the price for plaster ceiling and Lbox? Hope you can share!
Any recent photos?