I found out that reason alot ppl stuck at 337-340HTT is due to high temp of the mobo chipset. Try mod a delta FF to it. Sure can pass 350HTT.

hmm...not really true wat...like you...you're having the same processor as me..but yours is like much lower than mine...33 secs to be exact and i'm getting around 38 secs....does the ram play a part in it??

another thing...why is that my mobo cannot run at 1T timings? issit because of the mobo or ram? cause i can see wtm do 1T on his DFI board and abit board...and can all DFI board do 1T timing?

hmm....when your rig keeps booting up, its a sign that you didnt pump enough juice into your chipset...try upping the voltage for it...i'm running now at 1.5v for my Vcore, no problems wat... just make sure you got good cooling and i think your processor will fly.. 8k is pretty good.. hoping to see you OC your card, wanna see how high yours can hit....need some comparison since we're both on sempron...you can gif me quite a good reference for how my rig should perform..

for the ram timings, try loosen it to 3-4-4-8....think you can hit higher HTT with that timings...cause i found out that your current timings are pretty tight for KVR rams...

wow....i thought you will smoke me since you're on DFI and i'm on chiplak MSI board...wow...that really is a surprise...

his timings is ok la actually if its 133 devider...but for me, i'm also on 133 devider but its 2.5-4-3-6...timing is pretty wierd if you ask me...

I don't think 3dmarks will be affected when u r using SATA or PATA. So as CPU score. However, CPU speed tends to increase fps in Game Test 1 of 03' and 05'...that's how they lift the overall score by o/cing CPU.

juz wondering.. y u guys take 2500+?? 2800+ is dirt cheap.. 2500+ OC better??

Could it be BIOS settings problem? 

Ya, i wanna ask that too, why my max HTT is 250? is that Mobo limiting me or do i need to upgrade to Flash Bios?

hehe...rebenching my rig now...got my DFI board...

hmm...dun mind, can you post your mem timings here?? i haf no idea what are the function of each of those things...(except the common ones)

yea..new board..haha..tired of waiting already..
hmm...sourfly and wtm, did you all enable SMART?? cause i wonder if its a good thing...

i notice that 1T is not a problem..now running 1T at 3-4-4-8 1:1 ratio..hehe...wonder how high i can go before needing to use deviders...this board is getting interesting...

@sourfly, wats your Vcore for your processor? you run it at 2.7Ghz 24/7?
temps for semprons is pretty low...i think you can go quite far with stock cooling, as long as you dun up your Vcore that much...