hehe icic... which 1 do u prefer? y switch to s64?

u r chun bro, msi can go tht high, my mobo still stuck below 300htt

well u hv to increase ur vcore to get over 300htt?

yo guys, try this out to put ur logo into ur system properties

the download file below has s64 logo tht i create, follow the readme file inside

This post has been edited by wtm0325: Sep 8 2005, 07:02 AM


Attached File(s)
 OEMINFO.zip ( 16.9k ) Number of downloads: 15

luckily u din kaboom the hdd

wat the vcore u r running now? mine one 30++ idle when running default...

damn u can adjust 2.5, our abit only 12345, but the HT multiplier doesnt effect the performance at all no matter how high u go

hehe lower multilplier cannot ar? i thought my feeling is 1000 only

wats ur proc stepping now? izzit better?

i switch ram edi, dt-d43 512mbx2 kvr, max tested run at 265 2.8v 3-3-3-8 @ 2t

but still i cant go higher after 292htt, need to add vcore then only can get 300htt, 310htt nvr success no matter how many vcore added

cyclone i follow ur order running at 1T, but seems like my dt dun like 1t, n my chip seems anything higher 292htt need juice edi

damn it 1T, 225mhz with 3-4-4-10 oledi cannot

btw i found some new research here, i can OC high when using one stick ram

with 1x 512mb
319htt/ 166 divider/ 3-3-3-8 2T (max out, should be my ram or board limit)
325htt/ 133divider/ 3-4-4-10 1T (bootable, not benchable, dtd43 dun like 1T)

with 2x 512mb
292ht/ 166 divider/ 3-3-3-8 2T (most stable, all using default include ram)

now no choice, running 292htt

conclusion
1) nf8 maybe limits OC with 2 stick of ram
2) suspect above 320htt must use 1T ram speed to run it

ur ram is double sided or single? yuo i noticed with 1T better, but using 2 stick btw my dtd43 is double sided, or will it be psu problem? well i guess ram

[COLOR=blue][COLOR=blue][COLOR=blue]seems like my case try booting like mine 292htt with 133, i think it should works if u r using 2x512mb cvs

hyperx normally is bh5 i think, our 2.8v not enuf for it wats ur ram chipset?

u run cvs with ur crucial together? i scare later u'll hv the same problem with me even with good ram

o? which divider u r running now?

yesterday i test my cpu benchmark with 3dmark03 as my main purpose is gaming, so i used different combination of htt to test out which will has the best performance

tested 265htt 1:1 3-3-3-8, i get 876 for the cpu score
using 292htt 200:166 234mhz 3-3-3-8, i get 860

i wonder the fsb give so much score for the benchmark, can it be trusted actually? how bout u all, mind to run 3dmark03 cpu score n show off here

if u mean mine, yup, both at 3x

only for 3000+ n above

dammit so cheap...
wats the stepping?

should be receive by today, so hows the result n code?

ha i think normal lo, mine 1 oso, straight jump when doin prime stable, i doubt the thermal sensor is built inside the proc?

n wan to ask, anybody used nf8 here with 24pin psu? hows the voltage rail?

i'm using 20pin 450watt icute psu same as cyclone87, the voltage seems stable n nvr drop no matter how high we OC, will it be the 20pin problem?

This post has been edited by wtm0325: Sep 21 2005, 05:05 AM

walao walao walao!

grade A material

i think it's becoz of MBM software? try to uninstall it n restart, c the result

is this statement rite?