Yup, tats right...but due to wind sometimes around 118...

Is accurate already but can factor in wind of 1-2 km/h



This post has been edited by NewGUY: Jun 17 2011, 12:24 AM

FZ block give more torque but not speed unless u have good cam + carbs + a good muffler to give u extra speed. If this 3 thing u can tune nicely than only think of gear and racing bearing laa. But i still think u need to put a good CDI first. Brand Rextor or BRT i only trust this 2 brands.

Tq, for the tips

1) This sat goin to put bigger manifold d

2) The reason i start gear bcos if i start with cam and valve and others, i need open 2X to do the cam and valve, if i settle the gear and bearing, later no need worry liao...
hmm maybe i consider try CDI first....

3) Rextor i x remember who say will masuk water, then got recommend a CDI adjustable but is their shop brand.....can use ar?

This post has been edited by NewGUY: Jun 17 2011, 01:09 AM

Got a way to fix the masuk air problem put silicone glue on the top parts only because they use de silicone glue no good la.. u just put another layer of silicone or gasket sealant on top than settle liao lol. My one crack after very long time of use. So water go in ler but than now all my cdi i put 1 more layer gasket sealant on top.

Btw i think is the same thing u still need to open the engine twice laa.. unless u decide to put the cam with everything at once + overhaul. So 1 time gau tim but still need to check the engine behaviours also after put everything together.

This post has been edited by TryX: Jun 17 2011, 03:57 AM

Buy a pack of yeos soya bean...Finish it..Then cut and seal it with gum...Water sure can't come in...I do it with my bike alarm...>.<

---

Added on June 17, 2011, 1:58 am@Mental: Hv any1 intrest my footrest?? Price can nego..><

This post has been edited by 163119779: Jun 17 2011, 01:58 AM

Boring kat genting .... Internet macam snail ...

---

Added on June 17, 2011, 5:04 am@ shyan
If Wrap the alarm ... Ok
But CDI i not very recomend to do tht ... Coz CDI will panas , and need to cool down by wind ... Whn u jalan



This post has been edited by thianz: Jun 17 2011, 05:04 AM

rextor design problem, use glue to solve.
use rextor, very hard to start engine. but u will become excellent football striker. 黄金右脚…

---

Added on June 17, 2011, 6:10 ambrt ? At least tak ada above mia problem.

This post has been edited by patrickloo: Jun 17 2011, 06:10 AM

Oo...But u gonna find somethings to protect it right?

ok,another not so good comment bout Rextor, for me, i remove my kickstarter for security safety purpose....looks like i kenot use Rextor liao, btw i feel 4 stroke kick start seems harder than 2 stroke....

Wonder why??

---

Added on June 17, 2011, 9:49 amHmm maybe need design heat sink for them.....

This post has been edited by NewGUY: Jun 17 2011, 09:49 AM

@shyan .... Newguy idea good !! Heat sink macam ur pc !!! Haha ....

U just use food wraping plastic ... Balut the wayar & cable part .... I dun believe water go in senang ....

Apa pandangan anda ?

---

Added on June 17, 2011, 10:59 am@shyan .... Newguy idea good !! Heat sink macam ur pc !!! Haha ....

U just use food wraping plastic ... Balut the wayar & cable part .... I dun believe water go in senang ....

Apa pandangan anda ?

This post has been edited by thianz: Jun 17 2011, 10:59 AM

water will not go in by cable unless broken, water normally goes by the junction/connection/casing...

nowadays, the casing is aluminium i think(storm brand) but just dun hav fins to dissipate heat,maybe can put fins paste with double sided thermal tape and install exhaust to suck hot air.....

Is Rextor and BRT is aluminium casing??

bro Alexei

Normally, the shop will service your wallet.

It is up to you, unless you ask them to decide what to do for you. They can do anything you can imagine by referring to the service manual:
This post has been edited by alexei: Jun 21 2011, 11:54 PM

Lol...If u use the warping food d plastic sheet....Sry...sure overheat..>.<U not believe u try wape ur handphone with that...and use it...Sure overheat...Cause the plastic warp block the air cant cool down the cdi...So best solution is...Gian some glue on the cdi..hahaXD

ic2...
thx for the info
haha

wallet i bor kisah ..

guess i hav to ask porman to
btw when i change gear, my bike sumtimes won't lajak ..feel like the engine is dragging then only the power come out..
is it becoz of my autoclutch or my clutch plate?
and the brake system
tak sedap ady ...
is it clean whole brake system will make it sedap back like new bike ?

wrap the wire connect cable part only ... other biar jer ... BTW ... imposible water will masuk sana .. if u dun masuk sungai/laut or use water spray in there ....

What bike again? Autoclutch type, right? Just find foreman to tighten the autoclutch.

For brakes, one day let you try my front disc brake, and see if u like it this way, then we talk.

This post has been edited by alexei: Jun 21 2011, 11:54 PM

Lol..original cdi won't masuk water...haha

"fai wah " .. rendam air also wont rosak lah .... all sudah stick with glue adi ...

---

Added on June 17, 2011, 2:01 pmGEnting .. genting .. ... siapa kat genting now ???? ayam boring kat here ...

This post has been edited by thianz: Jun 17 2011, 02:01 PM

autoclutch 1 mah >.<
so the problem of bike don't feel lajak and dragging when changing gear is autoclutch problem la..

ok ...
then 1 day want to try ur brake liao
coz my brake..
i dun noe how to explain
still makan la and still can brake as i want
just only the pump, and my lever give me a kind of tak sedap ea feel