also facing this issue.request TAC 3 times.didnt received it.i try restore back rom that using stock kernel, TAC coming in like bullet

That's weird? lol.. Use Ultima 5 la kinda nice

missin gingerbread already lolz

one day has pass

does WB rom has DND mode (blacklist application)
open ur messaging, go to settings.. look for DND or blacklist or something similar....
uncheck filter for unknown numbers or something... if this option is checked, unknown number like Maybank will be filtered out...
also check ur call setting too..

i cant recall exactly, cos now im on stock 2.1 rom...

---

Added on June 28, 2011, 5:25 pmThis post has been edited by abundai: Jun 28 2011, 05:25 PM

Are SE Malaysia warranty for x10 (and arc) can be use in other countries or is it local only?

Back to Eric Will's rom since GB not coming yet

eh
you also back on 2.1 stock?

local only
no matter ap or ori set

I'm still on rdannar's b2bd rom...

tot31 loyal support

Anyone still using the stock earphone(handfree)? Actually it isn't bad, and I quite like it sound signture. As an oem earphone it really good . I further mod it become more isolation and trap all the detail high,mid,low.




This post has been edited by wkkm007: Jun 29 2011, 12:16 PM

this the best GB rom for me so far.....

What about cobrato's? now with bb67?

yup.. need to use full camera funtion..
and somehow, i kinda like mediascape too.... running the latest 2.1B rom isn't so bad..
noticeable improvement compared to 2.1.435..

after testing all the custom rom, in the end, i end up only using it for calls, sms, watasapp and FB... nothing more..
Flash browsing is not that important like i used to think...

This post has been edited by abundai: Jun 29 2011, 04:57 PM

How you do this? Mine guiding?

thanks for your solution brader2 sekalian. i've checked DND or blacklist but there is no option filter for unknown numbers...or something similar..
under blacklist.. is empty..

yesterday seems a bit better.. manage to get 2 TAC numbers via CIMB but it took me 2-3 minutes long..

haiis.. when are you coming GB?..

1 more month? huhu

i may get my hands on arc within october
lets hope se doesnt delay it like they delay 2.1

bring to front

the ibuds silicon not tight(ring shallow) 1. need find a way to tighten it. I curi from chepo earphone with mic (pc chating use 1) silicon ring. Ah, I think the original black rubber ring on the earphone itself can be use. haha 1 of mine original black rubber ring lost edi. So, without it the earphone very loose no grip always drop of so I do this mod on my earphone. (Optional: put black earpad 1st for prevent earwax stay on the earphone metal grid). 1: put ibuds onto the SE earphone. 2: Then the 'silicon ring'/original black rubber ring to prevent the ibuds come out/ stay in position. 3:then cut the comply form from earplug(show in the spoiler) into half horizontally (|==|==| remove oso the rounded end one side of the earplug. U will get two semi-cylinder comply form, cut it again cross section half only not full cut from side to it center. then pull the ibuds silicon tip to become upside down (like umbrella blow upside down by wind) put semi-cylinder comply form by separate the cut part and ring it onto the ibuds silicon hos and push the ibuds silicon tip back into the position. Done without the comply form oso very good edi.

---

Added on June 30, 2011, 12:42 pmMine is ori set 1. Ap set always get poor earphone due to the lower price.

---

Added on June 30, 2011, 12:43 pmno point mod AP earphone

This post has been edited by wkkm007: Jun 30 2011, 12:51 PM