Q9550 perhaps?

how much to get Q9550 OEM one?

i have some problem with my q9550
the temperature is quiet high
even at stock clock the temp around 70.c
anyone can help me to solve this temp problem?
now using CM V8 and the temp around 60.c with maximus 2 fo.
please help me..

how the higher can reach for E7200 if i oc this proc?

I got ntg better to do tonight. Presenting old school overclocking actions Still relevant with the thead since its an intel proc.

Intel Centrino Dothan 1.6Ghz clocked to 2.03 Ghz.
Platform: Acer Travelmate 4002WLCi

This post has been edited by k!nex: Jul 29 2009, 10:09 PM

hai guys..i'm just got my 2nd hand E7200 yesterday...

then i'm manage to OC my proc..here the result...





This post has been edited by nidzamputra: Aug 3 2009, 09:55 AM

nice result...
my e7300 got stuck @3.6ghz..
currently still using my old ip35-e

think maybe the mobo faulty.. coz last time using e2180 oso can't go any further..

you can try to reseat you heat sink and maybe change to better TIM.

same with my Q9450 at stock speed...

the temp around 50-55C..but this is all my 4 cores temp...oredi tried many methods to solved this prob..

but still the same =.=||....dunno why...plus i oredi lapped my proc ...

the result

hello guys i need some help here i build a new rig recently

Pentium Dual Core E2200 2.2 ghz 11x core multiplier
Intel DG31PR (I know its bad mobo for OC but I got it in bundle)
1x 2gb DDR2 800 bus Ram CL5 1 module
160 gb WD HDD
1 DVD writer
power case+psu
Ati 4870 512 mb (not installed yet)

1. Now when i ran speedfan the system temps show 67'c and core 1 and 2 temps are 39 to 43'c varies. in idle? is it a good temp or is it running too hot??

2. I also ran Prime95 at 100% load for 3 hours the temps were 58 to 63'c max for the core is it good enuf? too hot or too cold??

3. I am a total noob at ocing guys. Is it true that intel dg31pr isnt oc able at all? there is a new bios whats the easiest way to update the bios?? plz tell me.

4. as it has a core multiplier of 11x so it will definately go 4 ghz from 2.2ghz but i want min 3.5 or 3.2 ghz at least plz tell me from abc and step by step how to do it??

what precautions should i take please tell me also. running xp 32 bit sp2

just want to share with all of u about using SuperPi on Vista or had any crashed..

ReFer HeRE

60C at full load?? tats normal.. quite cool d actually..

if u dint realise, the stock vcore can run quite high fsb b4 actually needed a bump.. with the stock vcore, i went up to 400mhz (400x8.5=3.40ghz) n the temperatures din even change.. the temps are the same as stock and even after overclock.. but once u bump up vcore, den will get hotter..

my room temperature is at the typical non air con malaysia temp ~30C

edited

btw, my 4 cores temp is ard 60-65C at full load using IBT.. if use prime95, much cooler..

This post has been edited by jcyl2: Aug 25 2009, 06:07 PM

Original CPU/Socket : P4 630 3.0 GHz LGA 775.

-Stepping :N0
-FSB :800MHz
-Clock Speed :3750MHz (250 x 15) 38C idle and 51-54C on load
-Voltage (CPU/RAM/Chipset/AGP) :1.296 vcore
-Chipset :P35
-Ram Type/Speed/Timings :KVR 667@750 2:3 /5-5-5-15

-------------------------------
Results.(Min. 3 Filled)

-Highest FSB :1040MHz (@3.9 GHz not stable)
-Highest RAM :800Mhz
-Highest Clock Speed :3900Mhz
-Highest Vcore :1.326v
-Highest VDIMM : -

----------------------------
Benchmarks/Stability Testing/ Proof Of Testing. (Min 3 types of testing)
-CPU-Z Validation :



stable at 3.75GHz

now i quit using pentium and start using Q9550 E0, i need some advice on this new quad for OC. here my stock for Q9550. does the processor is very nice for OC?



This post has been edited by cipsmor: Sep 5 2009, 04:08 AM

off topic,
wna ask how to oc.
anyone cn help ?

yup..Q9550 E0 stepping is a very good quad for OC..

@cipsmor

Real Temp provides much accurate reading
You can download here

This is Intel Overclocking thread right..

so, here is a P4 Prescott

2.4 to 2880Mhz@2.88Ghz
-Bus Speed: 160
-AGP/PCI frequency: 66Mhz
Result:
Successful Stressed with OCCT
-100% CPU usage
-1 hour
Screen Shot:
CpuZ


CpuZ Validator


HwMonitor

Idle: 37°C-38°C
100% LOAD: 44°C-45°C

Idle - 37°C || 100% LOAD - 45°C
Powered By Intel® Pentium® IV
Cooled By Cooler Master TX3

Q9550 E0 is a great overclocker chip.
what are you waiting for ? bump the vcore and vnb and head on 4Ghz.

Can I ask you all something?I am just a newbie want to learn how to overclock and what i wanted to ask you all is.What should i see when Im choosing the right processor?Because some people say that some batch is better for oc.I dont really get it and I also read in the internet about stepping but how can i determine which one is really good for OC?Hope you guys can guide me..Sorry if I asked stupid question