i think the best way is..setting in bios...

hi, if want to pair with Pentium Dual Core E6300, which board around RM260 with 6 SATA, thanks

i'm using Acer E415SM mobo,i wanna to overclock my C2D E6300 @ 1.86 but my mobo don support oc.wad if i update my BIOS,will it add the "oc mode"?

This post has been edited by DayDream-ing: Jun 6 2009, 10:55 PM

If you're on an Acer then I don't think flashing BIOS would help. If you really want to overclock then get a clone PC instead of Acer, Dell, etc.

better buy new mobo with highly overclocking....sure you will happy

but I think its better to test it on Windows 1st only then if its stable we apply it to the BIOS?

thanks

for amd i know..can used overdrive software to oc your system...but for intel...maybe in bios is best 0r good method to oc...

Tried to OC my E8400 on my G31-Es2l using value rams ddr2800.

However, there is some problem during the process.

I tried to make it 400fsb x 9 = 3.6 in bios. Save it and reboot.
Mobo give a few beeps + reboot and end up reboot like normal (without OC).

I didnt touch the voltage settings. It was auto by default. Didnt try Oc with easy tuner yet. Feels that ocing in Bios would be more stable and accurate.

I did off the Energy saving options in Bios to be sure.

This post has been edited by Vinci777: Jun 8 2009, 11:16 AM

Did you set the memory to run 1:1?

can suggest any of them?
btw i'm a student,didnt touch oc b4,my budget rm300(mobo+hsf?/hsf use on stock1?)

u can get a normal mobo with that budget, therefore, ur chances of overclocking to high freq is quite low

E7400 user reporting in.

If I use a stock cooler OC to 3.49Ghz (266 x 10.5) when I ran Prime95, my temperature can reach 90+ celcius!

I bought a Coolermaster Hyper TX2 cooler, rat the test again and the temperature only reaches 62 celcius.

But the idle temp for both stock and TX2 is quite the same. 42 celcius.

DFI blood iron p35 is ok for that budget...new price is rm310, but pretty hard to get it now...

idle temp is almost same for most coolers.. because it is affected by your in-casing ambient temperature.. so better ventilation inside = better temp..

if you lucky..you can get DFI LanParty UT T2RS at rm300 for secondhand one

Thanks for the advise. Btw, the cpu voltage I set it to 1.27v. So far, stable and slowly wanna increase the speed..

how about this 1?
http://www.dfi.com.tw/portal/CM/cmproduct/...ormal&mode=view

This post has been edited by DayDream-ing: Jun 11 2009, 01:59 PM

Hi all sifu, i want to ask. I have E2200 and E6300.
Which 1 more fun to oc? and the temp and performance. tqtq

e6300 got 2mb cache...guess e2200 is only 1mb cache..might as well get e6300...e6300 i tink 3ghz no prob lar

I got 2 of it, now still thinking which 1 to oc