yup. then install the filter before the tank. even better protect your tank and the pump

cm3-4pm1 for normal hand shower
cm3-5pm1 for rain shower upto 3 bathrooms

price diff a bit only, so most ppl go for cm3-5pm1

cm3-5pm1 and cm3-4pm1 both are self priming pump

This post has been edited by zheilwane: Apr 29 2019, 09:20 PM

For those who like to know more about pump installation, can have a look at this video

if your main water pressure is weak. then do water tank bypass.

some people use solar heaters, solar above tank level, if do tank bypass, water cant go upto solar

many people are worried, water pumps could burst their pipes at home. Here is an interesting video i came across, it took 78bar of pressure to burst buteline pipe.
Regular household pumps are 3 - 4bar+ only, it is quite impossible for household pumps like teral or grundfos to burst pipes. It will only leak if the joints are not connected properly.

This post has been edited by zheilwane: Jun 4 2019, 12:09 AM

Still confused whether you need to get a water pump or not for your new house? Here is some info


I have many customers told me,

1) Plumber say test water pressure first, not necessary need to get pump.
As explained by GOOGLE, water is flowing down from the tank and every 10m drop = 1 bar pressure. 1 storey is approximately 3m, so if u your house is 3 storey high, your ground floor will only get 1bar or pressure while highest floor is 0.3bar, all landed houses the same unless your are using direct water supply and not from tank, that it depends on incoming pressure of the area. SO, no need to test, confirm is weak.

2) Plumber advise to increase water tank height or make the pipe bigger to increase pressure.
As tested, every storey drop (3m) u will only get additional 0.3bar of pressure, how high can u increase the tank? max u can increase 1 to 2ft, impossible to increase the height by additional 1 or 2 storey (6m). Any modifications would not result in significant pressure increase. So, dont waste money



This post has been edited by zheilwane: Jun 10 2019, 11:13 PM

thanks bro always try by best to provide best service and price

my previous house with GI pipe got minor leak that we could not find it. so we turn it on when we shower only

for my new house staying about 6 years already, we leave it on 24/7, only off when we going for vacation.

thanks bro Teral is really originate from Japan though made in taiwan, japanese motor are famous to be silent and also durable

Pmed you, or can click on my signature photo. bcoz we r not allowed to post here directly, forum rules

This post has been edited by zheilwane: Sep 30 2019, 09:35 AM

may b u can share the quote here, then we know what is the problem and how much

PM1 can get compatible brand like teral RM 180+- only
Cable no nd change
Capacitor also can get compatible may b RM 50+-

If you are a DIY person, then buy the parts and self change, save labour fee.

After replacing they need to connect the pipe to test and monitor, quite time consuming also

use compatible parts can, need to put here few days

not pump issue, get a plumber to check, i think is dirt in ur pipe

water will pass through the pump even u didnt turn it on, so if pump leaking black stuff, it should leak out even u didnt turn on the pump umless u have a main water bypass. then the only way to identify is to cut the pipe and check at the pump.

This post has been edited by zheilwane: Oct 4 2019, 08:58 AM

so far no issue with water pump bursting water heaters. if worry then get CM3-4pm1 or scala2 as advised by ianti.

for something more economical can also consider teral ab25x254tpc (similar spec as Cm3-4pm1)

yup can, only cm3-3pt or ch2-30pt not recommended to use with PC, other models can

Pmed you as forum rules does nt allow me to direct post here

1. yes can
2. yes
3. 0.67hp
3. yes can

you have how many bathrooms? usually house hold unie 5-4 or 5-5 only

10-2 got high flow buy low pressure