Advantage ah? Lesser Power Lose...but due to solid mounting the vibration absorb will be lesser then original lo....hehe

So I can feel more vibrate compare to original?
Ok..understand..

Dont know how bad is d vibration till i install tomolo ....hehe...

---

Added on August 19, 2011, 8:01 amPlaning to mold this thing into one pcs....any sifu can help or provide some idea?


Something like this.
http://www.evo123.net/showpost.php?p=28635&postcount=1

This post has been edited by nelsonlye: Aug 19 2011, 08:01 AM

last time khguan's fotopic.net got this DIY but now the site offline already.
about the same as your link.
btw, what meter is that?

in-mf ... Intake Manifold Pressure....

Hmm..need to get all those stuff ready lo...but where to get le? heh

don't know why recently when at high speed which is over 100km/h on high rpm that time my engine will knocking
tried different petrol and add fuel additive also same.

maybe can start at Ace Hardware, i think they got the most varieties for DIY stuff.


probably your injector injecting too less petrol, hence when high RPM it can't provide enough petrol into the combustion chamber. culprits could be:
1. injector
2. fuel regulator
3. fuel filter
4. fuel pump

or maybe your ECU sot-sot already. try clear off the ECU memory by take out the battery negative terminal for few minutes.

tools
-miniature sander(grinder)
-sandpaper, (80, 100, 400 and 600 grit)
-epoxy glue
-fiberglass putty
-body mask putty
-primer
-paint
-clear for protection

Able to get at ACE Hardware? hmmm....

how to know if my injector got problem? and also the fuel regulator. My fuel pump is still quite new, Bosch. Fuel filter I guess got 2 years age already.

Hi sifu...i really need some help here...my wira now having weird sound..here is the story...:
last saturday i went to change my brake pump and everything goes well...but eventually after 1 or 2 days (around tueday)...my front wheel start to have knocking sound...then i found it whenever i turn my steering left a bit then it will have that sound..(like metal to metal knocking sound)...isit the steering rod??
2. until yesterday night...i realise that now my rear wheel there also got "kleng kleng" sound when i go throught bumpy road or sometime suddenly one...hahaha...i am really really "mentally stress"...sifu please help me...haha..this month already broke adi...change so many thing...

I also dunno how to check if it got problem.
Your filter already 2 years so better change it, I changed mine last time the colour come out like coffee.. at the same time you can ask your foreman if he can check injector and fuel regulator got problem or not.


1. Not drive shaft sound? Maybe the disc come into contact with disc cover at the back.

2. Probably worn out dog bone / rubber bushing. Last time mine the foreman didn't tighten the dog bone properly then also come out funny sound, after tighten properly no more sound.

bro thanks for ur reply...btw the front sound when shifting steering sound wont be the steering rack problem right?? because i know that the steering rack is really really expensive for new one right??

thanks

The sound repeatedly when your car moving to the left or once only? To try, when stationary move your steering about 30 degrees to left and right repeatedly, if got sound means got problem. I dunno is it steering rack or just the bushing problem.

Maybe the Disc touching d Disc Cover & etc. This kind of thing very hard to type on forum. Better u send to workshop n check...easier....

---

Added on August 19, 2011, 3:17 pmHmm.....This is Evo Steering Rack


This also Evo...duno what it call... If this one spoil, i got 1 set at home Offer me ....

---

Added on August 19, 2011, 5:20 pmAny pro & cons by using such long air ram? need some advice..



This post has been edited by nelsonlye: Aug 19 2011, 05:20 PM

thanks bro nelson...i think i will send to workshop tomorow...and by the way...my rear wheel sound which i mentioned earlier...i think is actually come from my right side (driver side) rear wheel...i think the absorber patah adi (correct me if i;m wrong) cause my tyre already senget one side...sigh!!!
any sifu can tell me roughly how much to fix??

thanks very much

@nelsonlye
your MAF sensor is situated much more to the front. surely that will affect the air reading. yours don't have exhaust sensor right? need to do wideband reading to know if effect the AFR.

hye sifu.... wan ask.. if buy 4g92 halcut for wira around how much ar?

Try this http://forum.lowyat.net/topic/1996684

i got full set of halfcut instead~


wah,so fast promoe me wor boss~

Yeah MAF Sensor will be much front....so ECU will hv wrong A/F reading?

Exhaust Sensor mean O2 sensor?

Apexi Turbo Timer can read O2 and A/F

---

Added on August 19, 2011, 11:56 pmThe best send to your trusted workshop to check easier.....

Same goes to how much it cost...different by brand, location ma...if u go Spare part shop buy urself will sure cheaper lots then u direct repair at workshop lo.......

This post has been edited by nelsonlye: Aug 19 2011, 11:56 PM