[bios terms ]
know your mobo's bios well before you can start OC
if you're familiar with the bios then you can do OC...

there's two choices on how you can start oc, either in the bios or by using the 3rd party software produced by processor company itself or other company in your windows OS...

after ur explaination , i understand a bit than b4 . but i confuse is the clock
wat 2-2-2-5 , 9-9-9-27 or something else like this ... , blur

u have cpuz? launch it, click at memory tab.. does u know what the value indicate?

please list it one by one based on your observation.
i teach u step by step.. but please have a read first, make sure u understand the meaning.

that's call memory timing for RAM. The numerical is known as CL, tRCD, tRP, tRAS. If you do not understand what's the function for the matter, here a good guide for you to understand:

http://www.hardwaresecrets.com/article/26

If you already know what's the meaning behind RAM timing and wish to overclock it, you can read some article via here:

http://www.techenclave.com/guides-and-tuto...guide-2457.html


here's another good article about RAM overclocking:

How-to overclock
http://www.geekstogo.com/forum/How-t...ck-t11177.html

Memory Overclocking
http://www.hardwaresecrets.com/article/152

Beginners Guides: Overclocking the CPU, Motherboard & Memory
http://www.pcstats.com/articleview.cfm?articleID=1804


hope this help

lol ... still can't understand ... the clock timing so blur
nvm ~~ , i just want oc the 2.8 to 3.0 above only , myb no need touch the ram gua
the áthlon ll 64x2 240 2.8ghz , next week buy le i try 1st , if got any oc blems baru i come here ask

if you only need to oc the proc then, just do it... the term is easy like i said before if you didn't familiar with the bios you need to learn it first before you can set any of the function, just to make sure that you know what are you doing if not it getting more worse than ever. Keep reading the manual if you're not familiar with the function .....

lol.... just change a bit of the multiplier dunno can or not .. bcoz some games now need 2.8 or above and i dun want just arm~arm~ 2.8 or something else like that . and boot up or format pc also fast a bit mah

no, 240 2.8GHz max multiplier is 14X.
you cannot do anything about it, AMD lock it.
else 245 14.5X and 250 15X how to sell?

actually the one you state 2.8ghz above for minimum requirement for the games is based on the old proc.. not a new proc.. actually

hye all..can i ask a question? what is the max can i get from a athlon II x2 250 when i oc it? thanks in advance

i am using gigabyte x58 extreme, is the limit of bclk is 180? if i go beyond that i will fail, i tried lowering the ram speed to 1200mhz, qpi speed is 7.2 ghz, voltage for vcore and qpi i've increased but still won't go beyond 4ghz, btw ram is corsair dominator ddr3 cl8, and i7 920 co/c1... where did i go wrong?

This post has been edited by mato89: Dec 5 2009, 01:44 PM

hye..newb here..just unlock 4th core of my 720be..thinking of oc a bit to 3ghz but dono how..can sum1 help me..mobo m4a77td pro..thx

go ask in AMD overclocking thread as well..

i need help,i got a xps1640 T9600 2.8G HD4670 4gig ddr3 ram

i wanna oc my gpu but all the progrmas suggested giv the same responce,either cant set clock speed or enter program too laggy,is there anything i need to do b4 i oc?

can i oc my processor? if so by how much?

i m using zalman nc2000 to cool my laptop tats all,thanks sifus out there

i hav rivatuner,AMD GPU clock tool,techpowerup gpu clock tool installed and none of it works...

can old pc be overclock?

got function of oc, u always can

You can try check the bios version. And flash it with a latest one.

I got a problem.
Intel E6300
Asus P5B
Cooler Master GX650W
Ati 5670
Corsiar Gaming DDR2-800MHz 2x2GB (dual channel interleaved)

by default, e6300 is 266, and 800MHz (FSB:DRAM 2:3)
Why is it recommended that overclock at 1:1?
When i increase fsb, the dram goes 1000MHz and doesnt boot. (PC-6400 mode)
There`s possible to run in (PC-4300) but I wan the ram run in full potential.
any help/suggestion will be appreciated.

Ts, bios for beginner , that link content is dead pls update thanks

I'm NewBee in overclocking ~
erm... may i know got any software is using to overclock ?
thank you ... and sorry ...