Carvox is also a 2-way right?

Other than quality (comparing steelmate and tenon), what other features differ?

---

Added on February 5, 2011, 7:54 pmany of these can set a preset auto start every morning?

Steelmate 898G, Tenon CX1000, Carvox cx999

---

Added on February 5, 2011, 7:58 pmkmpoon : got it

This post has been edited by ThunderGod_Cid: Feb 5 2011, 07:58 PM

Yes...I sms and confirmed oldi.....will pasang when I am bac into town.

cheers...!!!

better u guys buy steelmate,viper and higher than that..
my friends carvox rosak already.. only 2 month.. cant autostart..hmmm...

noted

i agree.... thats what i told Elton

Hi guys, normally how long your auto-oil and timing belt last? Mine already. Hit 30k for auto oil and 50k for timing belt, but due to festive season, wondering if I can hong on another month or two

This post has been edited by Chester: Feb 6 2011, 08:11 PM

Auto oil 20k but try to change at 10k or 6 month... timing belt 100k but recommended to replace at 60-80k or 1 year

hey guys. i wanna ask why my fc going up after removing cat con and changing to double barrel muffler? before changing the 2 things my car can use RM30 ron95 from gopeng to kajang. and now it needs RM40+ ron95 with same driving style n speed around 120. do i need the old cat con?
ppl are saying my foot got heavier but i dun think so.. any other probable cause? i replace the cat con with a bullet. T__T thanx~


This post has been edited by blo0dLuSt: Feb 6 2011, 09:01 PM

dun tell me while u remove the cat con the person damage ur o2 sensor

auto oil can stand up to 40k
recommended to change every 20k..
better use good ATF for your transmission..
if im not mistaken.. The cheapest ATF in the market = RM12/liter
proton ATF 1 Liter RM20- RM25.. dextron 3 grade.and of course rebranding from other oil company.. most probably PETRONAS.. thanks to government..

im selling ENEOS ATF oil.. but the price is not Rm12.. hehehe

---

Added on February 6, 2011, 9:21 pmoil price increase maybe? ur maybe ur car miss any maintenance schedule..

btw, if you change your exhaust system.. they are slighly diff/affected on your FC.

This post has been edited by gagak_84: Feb 6 2011, 09:21 PM

Looks like it's gonna be subaru..due to the cost.

huuu.. did some reading.. td04l subaru is ball bearing in-which its spool faster then gsr's since its a bush bearing~

TD04L also had 2 type of bearing.... Ball Bearing and Journal Bearing. Ball bearing would spool faster but create lower HP output compare to the same size of the turbine using Journal Bearing. Fast spooling dosent mean good for any setup.

_______________________________________________
Mitsubishi TD04HL-16T with a 218/60 wastegate, these cars use the same turbines but diffrent compressors to be able to increase the power from 240 -250 hp without exceeding the maximum rpm on the turbo. You´r talking about the increas of powewr in the LPT engines, why they only can increase the power up to approximatrly 230 hp is that the turbo is too small"


(the following come from mitsubishi web site!!!!)
"organization output(ps)22-100
amount of exaust(cc) 1.500cc
highest rotation speed(rpm) 200000
highest temp of gas(centigrade) 200,000
maximum compression ratio 2.4"

" The TD04hl family is probably comparable to the Garrett T28"(garrett T28 can produce up to 630 cfm ans is good of 350-375 hp range)

"The latest development involves higher technology internal parts that increase the efficiency range of the turbos. One such development is the ball bearing center cartridge. Ball bearing center cartridges spool up faster and are able to spin to higher rpm without overheating. . The TD04HL series by Mitsubishi is fitted to some late model Saabs and is also a higher efficiency range turbo that can spin to much higher rpm than an ordinary TD04H. I assume it has some sort of ball bearing center section".

source "superhonda.com"

---

Added on February 7, 2011, 8:56 amsomething not correct hahaha T-28 630CFM hmmmmmm let me check lols

---

Added on February 7, 2011, 8:59 amFound....

T28 is 31lbs/min...... so roughly 448.632cfm

---

Added on February 7, 2011, 9:06 amsome goodies for everyone http://www.ztechz.net/id1.html

This post has been edited by mxsteven: Feb 7 2011, 09:06 AM

Normally FC will remain the same or better after remove the CAT. ur new muffler is S flow or Terus flow ??? Ur car power is better or same from the ori setup ??? Is there any engine check light turn on ??

i think its terus flow. power bettr but fuel is worse and sound also more bising. engine check light which light? the one with the oil?

@steven: o2 sensor where? he cut the nose and tail of the catcon and weld it to the bullet there. or maybe there are leak in the system? i've done my muffler and de-cat at wei yip balakong...

This post has been edited by blo0dLuSt: Feb 7 2011, 11:49 AM

you did at weiyip? they dont know shits bro

ya i heard also bad comments bout them. so any1 can help me where the o2 sensor are in 2001 4g18 waja since they are cutting the cat con nose and tail and i dun see any wire they cut..huhu

This post has been edited by blo0dLuSt: Feb 7 2011, 12:13 PM

afraid that they damage the o2 sensor by overheating while doing the weld job. There is no other reason for makan minyak xcept o2 failed and goes to open loop mode.

the only thing can buy at wei yip is exhaust tip haha..I've learnt my lesson on going to those zhapalang exhaust shop..once is enough..

anyone from Penang? I want buy works adjustable cams

better save up the money for something better