Not all Proton's GB reverse gear are straight cuts. Most of them are still helical cut. Only the older GB like from the 4G13 8v Orion uses a straight cut reverse gear and a vacuum synchro to engage.

can provide pic to can i make reference??

a bit not understood

my fb tehere still got
go cari urself

finish later upload more

my fb tehere still got
go cari urself

finish later upload more

no la bro,cause i noe if wan maintain good back pressure the piping need to be 1.75" but how about the tip there?is it have to be 2" or below?

as i said, your tip can be how big you want. 10' also can. no difference in power. Its just a tip

oh,i tot got difference haha...thanks 

Lets say if jpj not a problem I transplant a perdana's 4g63 sohc use back ori gb and use carb setting with custom made tapak to suit 4g9X carb manifold with 4g9X carb and distributor , what are the things need to mod ? how much the perdana engine kosong and outside workmanship will cost me ?
Been counting around 4g15 with 4g18 stroker and etc etc wont be cheap to make decent power , so if sell my engine and compensate for the 4g63 sohc would be more bang to my buck ? Correct me if I am wrong sifu

injection must get fuel pump then charge wiring cost then later must get piggyback ecu to tune if put high cam den must go dyno tune ecu 
thinking wan do carb with weber in later plan cheaper and can adjust self no need pening must fork money each time want to tune 

any1 knowmore detail about 4g6 series transplant and perdana sei engine kosong cost ????

---

Added on January 28, 2011, 1:11 pm

dont lar scold ur car
sayang sayang it more

where oil leak ????
tell us and let sifu here help you
air cond got petrol smell go get air cond shopp ppl fix
the air circulation flap cable drop out or the flap out of shape d

if got smoke smell faster get it check
scare got wiring burn

get ur air cond evoporizer cleaned
sometime the mold inside buat hal trap the smell and give it out slowly

air cond service and change the filter and clean the mold cost less then 150 buck only

but get ppl check the burn smell quickly as possibe
later cought fire then hai lat

anyone can teach me how to open side fender d casing? need open it and ketuk as d fender dent into it. need open d fender and ketuk.

I suggest you change engine, then sell me your 4G15 block

hi guys,yesterday i accidently unscrew my cluth cabel and then i fasten it back...is there any effect on uncsrew it/loosen it....??

2-wat is so called 'clutch tinggi'??

   
tak mau la
my block very old d leh
20 years old d 

aiyoh...old la mau kena tukar.........posibble have unseen crack....like my perevious case valve patah.....that valve never change from it manufactured date........unseen crack is culpurit...bear RM 1.3k fix that.......better change engine that same cc but newest date of manufactured like 4G15 engine saga lmst/lmss....if got big pocket change more powerful 4G61

---

Added on February 3, 2011, 4:56 pm

i ingat striker ape la.......that called actuator....how much the starter booster??

no budget la
mau restore body dulu

starter booster ???
25 or 28 with bosch relay
mau ???   
just morning change
no more malu whirr whirr start sound
pusing terus hidup

no budget la
mau restore body dulu

starter booster ???
25 or 28 with bosch relay
mau ???   
just morning change
no more malu whirr whirr start sound
pusing terus hidup

about engine you can find engine kosong.....no need to buy fully engine.....use back all old engine part
how frequent you use ur proton???if selalu guna...restore biasa2 saja.......no need to fully restore
about starter.....i will wait my PTPTN out dulu......use sikit utk car.......later i ask you to buy and post to me.......

---

Added on February 3, 2011, 5:24 pm
about engine you can find engine kosong.....no need to buy fully engine.....use back all old engine part
how frequent you use ur proton???if selalu guna...restore biasa2 saja.......no need to fully restore
about starter.....i will wait my PTPTN out dulu......use sikit utk car.......later i ask you to buy and post to me.......