I have this Gallery3DFroyo.apk.

How do I install it? The conventional installation method doesn't work. I've even tried putting the file into /system/app/ (yeah, silly), but doesn't work either.

Any idea?

u tak tau pakai.. belajar dulu, then shiok

Does this 1 works for Froyo?

I used this when I was on Eclair. Look at the last updated dates. It was in October. lol

i m reading bout this.. i plan to fix my 3br too..

tiap tiap hari pun hang.. macam mana ni..

my phone is laggy. but i nvr complain knowing that after flashing.. it will the best out there (atm). hehe =D
sgs.. 1 week user

sebab
orang hang = phone hang
orang hang pun tak boleh pakai ..haha

upgrading froyo....

3 button fix (1st page on thread)


Preparations: Make sure you have the drivers installed (i.e Kies is recognizing the phone), adb available and "USB Debugging" turned on in "Settings -> Applications -> Development" menu. Type *#0228# in the dialer and check Voltage value (without USB plugged in) is atleast 3800(mV).

1. Unplug the phone from the computer (if connected)
2. Kill all Kies related software (tray agent, etc)
3. Start Odin3 v1.3 Downloader
4. Plug in the phone to the computer
5. Start a new command prompt and navigate to the folder / drive where adb is located.
If you haven´t downloaded adb yet, get it here.
6. Type "adb reboot download" to the command prompt and press enter.
7. Move to Odin3 v1.3 downloader and select the "Aries_P-SBL.tar.md5" as PDA file. Make sure "Phone Bootloader Update" is ticked and re-partition is unticked. Do not select any other files but "Aries_P-SBL.tar.md5".
8. Press "Start" button to launch the update process. It will take around three seconds to complete. After the update phone will reboot automatically.

1. guys, may i know erk.. how to do point number 5 (highlighted in red)? lol

2. in the odin zip file, after o extract it, there is this ".pit file". what does it do?

3. in the adb recovery zip file, after extract it, there are 2 other dll foles. what does it do?

thx ya'll!

This post has been edited by cradle0fFilth: Nov 26 2010, 06:48 PM

Do u all fix the GPS of SGS DXJPA on LbsTestMode?

Reading from [GUIDE] Why Samsung Galaxy S i9000 GPS is inaccurate and how to fix it.
http://forum.xda-developers.com/showthread.php?t=842694

1) Download Android SDK, extract the content. ADB should be located inside tools/ folder of Android SDK.

2) Don't bother with the .pit file. You won't need it for this 3-button recovery patch.

3) The other 2 dll files are the libraries for the executable programs to correctly communicate with your phone via USB. Just leave it there.

Hope these help. But I've checked the last few pages. No 1 mentioned anything about patching the 3e recovery on Froyo.

Anybody tried this before??

Headphones sound quality fix and improvements for Galaxy S

http://forum.xda-developers.com/showthread...ht=music&page=2

For those who need to fix 3 button recovery ...

here is a link i used last time ,
when i still on DXJG4 2.1 eclair ,hope its help ...

Im thinking to start rooting n flashing my sgs today..my first time with my new sgs..got any advice to start? what is the most stable setting for sgs right now..that lag free n good battery life?

hi harddisk.
u mean start the command prompt in this android SDK? i had downloaded the ADB windows oredy (the link posted by Richthofen on the 1st page of his thread)

---

Added on November 26, 2010, 7:14 pmhi Kee,

yup. i m reading about that 1. But Harddisk got a good point. wonder does it work on froyo 2.2 ?


This post has been edited by cradle0fFilth: Nov 26 2010, 07:14 PM

upgraded to froyo...nothing change...cant notice any speed improvement.

lol i feel lagfixes doesn reli help much in sgs froyo... wonder if others feel the same

flash back to 2.1 , then apply this 3br fix , then flash to 2.2 again ...

1. unzip ur adb files into c:
adb.exe
AdbWinUsbApi.dll
AdbWinApi.dll

2. plug usb to ur phone and open odin and do step no.7 above
3. on ur computer screen go to [start] > [run] > type all this >> c:\adb.exe reboot download
4. go back to odin window and do step no.8 above
it should be done after ur phone reboot

This post has been edited by skydrake: Nov 26 2010, 07:21 PM

speedmod k9 doesn't help?