Errrrr, any possible factor that contribute to the running hot ESC ar?
The new 30A ESC has about the same temperature after 6 minutes flight. Gear mesh is not tight as I have adjusted yesterday, what else?
Should not be the 325mm wood blade, right?

yak or katana or addiction x?

1. get more airflow to ESC (hovering tends to heat up ESC more than FF)
2. 30A for a 450 size heli is underrated .. i running stock align 35A oso HOT (want to change but i love the align soft start too much)

whichever plane u get is up to u ... those are all 3D planes which i have no experience with (not interested in plane 3D)

Hmmm, then I think I have made a wrong decision. Previously was struggling between 40a and 30a.

A guai low in helifreak told me it is the 2A/5V BEC heating a lot so now I have stick a heat sink on the ESC surface. Tested on the ground and I can feel the heat transfer, hopefully it helps to reduce the temperature later on.

u will still need to provide airflow otherwise the heatsink will not function efficiently
BECs oso causes heat if under load .. i am using external BEC for my PRO .. 35A ESC still hot .. hahahaha

Guys, after a further research i found xtreme blade for my "coming soon" lama v4.

I want to ask if this will fit my lama v4?

And in this package, is it they sell 2 upper blades and 2 lower blades?

XTREME Blades

I am not sure and needs confirmation from you all

Thanks to all pro.

according to the description ... it comes with 2 sets of both upper and lower blades
why would u wanna get extreme blades ??
they are hard heavy and causes alot of damage if u hit something with those blades spinning ... not to mention the extra stress on your motors with heavier blades
the original blades are very good .. they last quite well .. and they shatter on hard impact which in turn saves u from damaging other parts such as the shafts etc

Thanks QiW, then i will go for the original blades. I also plan to upgrade the shaft. Which shaft should i get?

other than the blades ... i hear EXTREME stuff are pretty good but expensive
just change to the extended shaft for the upper blades ... that will do
other than that .. i dont think u will need anything else for a beginner
if u fly often enuff .. u will outgrow the LAMA sooner than u think .. hehehehe

hmmm... u got ur point. Thanks a lot

i love 3d planes..... 4d even better

huahahahaa
ADDICTION X is NOT CHEAP to crash when u learn 3D .... but of coz u have no probs with that laa

haha..

kerja mau kuat sikit la...taklah, completing the augusta fuselage..

augusta fuse ??
no more 3D stuff ah ?? or 3D with scale body ?? hehehehe

Boringlah 3d... Too much time have to commit i lazy alrd...

i can do basic 3D .. i feel quite enuff for me oso
learn abit more no need to hardcore so much
but if i were to go SCALE heli .. have to be at least 500 size laaa .. small heli not nice and underpowered

no money la

I prefer to go for scale airplane rather than scale heli. No matter how realistic it is the scale heli still looks fake because of the rotor head ..... hehhehe

But I like my Cessna a lot when I see it in the mid air, really looks like a real plane flying ......

FLYBARLESS.

some video of u guys flying lah thanks