so any bulldozer? lol..
heard ddr3 price want to drop.. nice time for a new setup..

Orait noted. BTW since i'm using the black edition, right now I'm OC using just the multiplier without increasing the FSB, is it a good practice?

+ i've checked the AM3 CPU/NB Frequency/DDR3 Divider Table on the first page, how should I read that? is it like, if ur fsb is 200, your setting should be on the same row?

Then if i want to to bring my ram to 1333?

Can add me too? 
Phenom II X2 555BE Unlocked 3.51GHz (200x17.5) 1.35v Stock Cooler
OCZ 2GB 1333MHZ Gold Edition (9-9-9-20 1T)
Asus M4A77TD Modded Bios 2104

[attachmentid=1842979]

what about mine bro

http://forum.lowyat.net/index.php?act=ST&f...0#entry37115649

i feel weird with this one..


can do with 1.3v?

?? couldnt understand u well

well... 1.2v and 1.5v, the diff in core/cpu temp is very small.. not that 15c jump.. im not so sure..but i can say 5c perhaps...

@unker ah khoo..
what ram used? ur ss showing 2 mem tab instead of SPD.. kekeke
come2.. beat the wall. (eh..whats ur target eh? 4.1ghz <1.4v ya? )

i have my own theories and reason behind that..
last time, when no imc volt to control, the imc shares thhe same value as vcore..
so vcore able to be 1.5, y imc shouldnt..kekekeke

pwm.. i donno..but i dont think that is a huge amount temp jump there..cuz i dont think it need alot of juice..even with 1.5
for NB, increasing the vNB will generate more heat compared to vIMC increase right?..and yet once i try to push my ram max, i will increase vNB quite high..
yet..many board survived and got sold 
(and i dont  see what is the relation of vIMC will increase NB temp. enlighten me pls)

what chip u got there bro? 1055t? 3.9xGHz considered decent ledi, not like our daily task need at least 4GHz rite?     

why that mobo? 4+1 pwm right? better dont..take the one with 8+2. (or 8+1 if got..since u not OCing ram)
6cores most likely  will kill ur moboif u take the one with less number of phase.

pensil vmod? long time havent heard about this.. why dont u just softmod the vcore and clock core to the max...GC mem clock wont improve as much as the core clock..
i think Ocing with turbo mode on will need a insane amount of volt..from what i heard la..kekek

@verdict.
no good result produced.. later post.. dont have time to tweak..  
1750mhz 7-9-7 is the max... 1.58vdimm