he have the whole sygic 10 installer in his dropbox maaa...

dats Y BTW is your sygic 10 up and running.

anyone just reflashed lately ? i just reflashed but i dont know why its taking so long for it to boot,it just stucks at the screen with the 5 dots,it's been almost 10 mins...only flashed the firmware and did not flashed the emmc,
weirdly after so long it still cant boot into the system

btw ,flashed it with RX-51_2009SE_10.2010.19-1_PR_COMBINED_MR0_ARM

This post has been edited by tabletennis: Oct 8 2010, 02:37 PM

if u install tracker.cfg make sure its not in the excluding list

not yet install Sygric 10..might installing tonight..tonight im free

Try reflashing again, if nothing changes and it's still stuck at the dots, congrats: you're the proud owner of the SECOND motherboard/eMMC cair Malaysian N900 in existence.

Which I really hope is not the case, but if it is, be thankful you still have warranty (which I didn't).

This post has been edited by Eiraku: Oct 8 2010, 03:04 PM

BUT will the warranty thingy(ap set from clareen bought on march) help me to get a new set or even repaired??? since its the mobo or maybe emmc problem

THAT'S IF it's a fried eMMC/Mobo. Even if it is, they SHOULD get you a new set, if not, yet another reason never to go AP.

But really, I don't know. All I've heard is the rumor that a certain AP company likes to sprinkle water onto in-repair sets that they can't economically repair and call it "water damage" - which conveniently voids your warranty.

Rumours, mind you.

I've heard good story of warranty claim from Asia Mobile Pacific(Clareens N900 AP set warranty provider)
Try reflashing 1st.If the problem still persist then time to test the claim that AMP is a good AP company.

i can sure that 99% Im the proud owner of the SECOND motherboard/eMMC cair Malaysian N900 in existence already...reflashed for almost 6 times...tried flashing emmc too but failed (my n900 was in flash mode,but will auto boot to the 5 dots whenever i tried to flash emmc) sigh

no error messages coming out?

waiting for suitable device,yet im sure that my phone is in flash mode...so can confirm the emmc gt some problem d

just curious buddy

did u include step

Step 9 After reflashing before it boot up IMMEDIATELY TURN OFF YOUR PHONE BY UNPLUGGING THE BATTERY AND CABLE

before flashing the eMMC

i cant confirm about how good the warranty for AP might be but why not send it for warranty to find out. All i know replacing mobo is usually not cheap

Why don't you try pm Eiraku to ask him all the steps he took to try reviving his N900?
He used pretty much every software method I could think of to try reviving his N900.Maybe one of his step works for you.

I'm not hoping for your phone to be permanently bricked but if your phone is truly bricked maybe we can compare what you & Eiraku did in common that result with death N900.

A simple question lingering in my mind.....

If I bought a new set with everything complete updated to latest firmware and usable already by just slot in SIM card, should I come home re-flash it again from step 1-14 or I just start using it by installing all the candy until I face system crash??

Why fix something that is not broken?
Just insert your simcard & enjoy.

thx sifu

Curious, why you tried to reflash? Anything happen to cause you to reflash?

There no need to reflash to the latest version but its recommend to do to prevent future complication and if something goes wrong its easier for the forumer or sifu to assist you since we are on the same page aka firmware or condition.

If yours is AP even brand new not all are using the same firmware some might be from different region and condition.

This post has been edited by aspire2oo6: Oct 8 2010, 04:54 PM

yup,i repeated the steps so many times d...resulted the same thing...