The 560 ti come with 2 x 6pin->2x3-pin cable, they can be slot into the standard 4-pin HDD connector

---

Added on May 1, 2011, 12:14 pm

I just tried O'C the card to 950 again, getting artifact in games . Maybe I should raise the voltage to even higher than 1037v?


This post has been edited by Convael: May 1 2011, 12:14 PM

can 560ti sli be powered by 650w?or not enuf juice...someone in ocn did 460 sli with tht 650w

actually sli nvidia gpu really many problem? i saw so many ppl recommend only 1 gpu these day.

hello all...just want to know..is it safe setting like this...i'm using it for folding...

item : msi gtx570 ref design
GPU clock : 800
shader : 1600
Memory : 1900
voltage : doesn;t change...

temp load : 85c...

is it safe for folding... stress it for 1 week non stop (24/7)...just want to know...and is it normal...? thanks...if not safe, need to stop folding gpu...

100% gpu load?

yup...

can try lower down the load.

already try that..and the ppd is not so good... just want to know, if 100% full load temp 85c, folding for 7 days straight is dangerous for that card, i'll stop it until found a good cooler for that gc..

and forget to tell...surrounding temp also high...coz my rom only have 1 door for ventilation...no windows...like bilik kebal...

is tht stock clock or already lowered using software?

tis 2,3 days is pretty hot...just installed an ugly fan extension n manage to drop 4-5'c only when gpu is under 100% load

try 60-80% load, and rest few hours in between,
lower ppd, but still is better than totally stop.

I hope you all can help me.I'm planning to buy a EVGA GTX 460 SC 1GB GDDR5 but how is the performance and price range.I play game like COD,Crysis2,MOH,Sims3,GTA4 etc.Game vary from low to high spec.

My pc spec is not high end.

Core i3-530 OC to 3.2GHz to 4.2GHz.Got a few settings
GA-H55M-S2H Rev 1.0
4GB DDR3 1333 Team Elite
XFX GT220 1GB<I got this GC just to watch video and do work now plannig to get a better GC without bottlenecking the system and wasting my money.

what is the gaming resolution?

My resolution is 1920x1080 or 1600x900.
Using LCD TV to play racing game like NFS and to play normal FPS game use PC LCD.

This post has been edited by amy89: May 9 2011, 08:10 AM

err
anyone with msi gtx 460 hawk experienced not being able to control and monitor voltage through msi afterburner?

i have this problem and this is apparently caused by the nvidia api i2c module cannot detect the i2c bus of the gtx 460 hawk..

this problem is does not happen to everyone..
i tried the latest 260.71 driver and the previous 260.51 driver without any luck

the symptom is after installing driver voltage control function works normally...

then after restart, cannot control or monitor voltage anymore..
anyone experienced this before like me?

@ben_panced, Did you try checking if Voltage Unlock is enabled in Afterburner?

yes.. after installing the drivers i can control voltage..
but after restart the it is gone..
i bought the hawk just for the triple overvoltage, but now i cant use it..
now ayam stuck at 840/1680/4000

thread for this problem
http://forums.guru3d.com/showthread.php?t=342472

This post has been edited by ben_panced: May 9 2011, 05:41 PM

It must be something to do with the drivers then You should use Driver Sweeper to remove all before installing a new driver. Perhaps you can give that a shot.

after i get back from work maybe ill try downgrading to the last whql driver

Yes, normally I will use Driver Sweeper after uninstalling the drivers before I proceed to install the new driver I've never had problems

Use AfterBurnerv2.1 instead of the one come with the box.