hi, what is the advantage of increase the memory clock?

wanna ask how do you guys judge whether your card stable or not, by running what software and usually how long to judge it?

below is the clockspeed that i clocked for 24/7 setting, now still using stock vgpu ( v1.05 ) , i want to find a lower vgpu for lower temperature.



This post has been edited by nncl: Apr 2 2011, 12:59 AM

Latest Furmark 1.8.2 in Xtreme Burning mode stresses core and mem to the max.
10 mins will do.

1.9.0 version not recommend ?

oops jz saw that yes 1.9 should be the latest version

thx bro owikh , trying now.

hey bro . is there alot of performance increasing core clocks without tweaking memory clocks ?

successful drop the vgpu to v0.987 from VID 1.050 , clock at 810/1620/2000.
furmark xtreme burn in mode 70c max, fan at 80% ( because i enable overide fan auto profile, set it over 70c will auto at 80% fan speed), 80% fan speed while gaming still acceptable for me ,compare to my old car gtx260 amp2 , temperature control really improved a lot in new gerenation gtx series card

here the proof with disable OCP


ignore the donut gone blur, because it crash after i used afterburner to screenshot.

other gtx570 user mind to share your card temperature when running furmark? wanna compare.

Aiyo. I got crash using that software. Im using stock setting for my GTX 570. Highest temp is 73c. Still you got 70c at 810MHz. Incredible.

i think because of my fan speed is 80% so the highest temperature is not same, can you try to set at 80% and run furmark agian? i wanna see the different. thank you.

Lol. I was using 80% from the beginning. Manually set up from the software. Maybe I have to clean my casing. That should work I guess.

hi, i oc my msi gtx 560 ti twin frozr 880/1025 > 980/1075, max temp 81c ok?

Looked quite fine, still got room to go higher

Eh. Just to share my experience here. I know I'm new in this pc stuff. Last time when I was playing Crysis 2 full setting, my temp for gc is 98c stock setting. Super hot. I can feel the heat coming out from my casing. At that time I was using Msi Afterburner for fan setting. So I've try to set the fan for my gpu. No good. Then I've decided to uninstall the software and install EVGA precision. Problem fixed.

Ya, mine can oc 1000mhz easily.

This post has been edited by FiragaZ: Apr 6 2011, 12:23 PM

i tried 1GHz, but when i running unigine heaven dx11 to test stability, my monitor display become standby mode means no display at half way, have to reboot after this.

It needs more voltage.

i slowly test 980/1075(stable)>990/1100(stable)>1000/1125(fail). I will later 1125++ later, my maximum voltage is 1150 at Msi afterburnner, is it too over to go further?

fan speed in MSI Burner just increase case fan speed rite? i set it higher heard the case fan bcame louder.

to go higher than 1150 u hv to mod bios or google for modded bios.

are u sure the noise is coming from case fan? should be GC fan only.