hahaha
ram only run 4g
dunno where another 2g missing?
timing too tight?
running @ 1.7vdimm now

---

Added on March 1, 2011, 1:02 am

This post has been edited by irienaoki: Mar 1 2011, 01:02 AM

there was discussion bout this b4 .
but i think its due to overtighten proc or something .
try ask owikh .
he explained this situation b4 .
forgot edi .

hehehe waiting for him
myb he sleep edy

---

Added on March 1, 2011, 1:07 ammyb i ll run on 1600cl8 for today
tomorrow will continue the quest
hehehe
my i7 4.2ghz was beaten up by ezzy i3 4.8ghz in superPi

---

Added on March 1, 2011, 1:08 am
back to 1600cl8
8-8-8-24
huhuhu
hope can solve this prob tomorrow

---

Added on March 1, 2011, 2:54 amfailed.huhuh... uncore 4.2k qpi/dram 1.6 vtt n qpi link max 7218mt/s - but still detect 4g ram only-
if Q.L more than than pc cant boot up
fuhhh i take a lot of effort to make it stable

This post has been edited by irienaoki: Mar 1 2011, 02:54 AM

mem lost due to wrong RTL
u might wanna follow my 1st page for 4.2GHz. voltage and RTL.
Just that ur dram I'm not sure whether it's able to stabilize at 2000 or not.
dont touch the QPI link speed 920 is 4.8GT/s and dont simply change what u dont know.
not everyone can do 2000, it needs time n patience.
The best site to learn abt mem oc is i4memory

This post has been edited by owikh84: Mar 1 2011, 08:05 AM

Got new bios at i4memory that u might want to try.. Im using 0095 if I'm not mistaken.. Search for r3e section..

0095 is older thatn 1005 ?
what's d best bios for now ?
i want to flash my r3e this weekend .
and start clocking again if i have the time ^^,

irienaoki. what ver is your ram again, I dont think it's elpida any longer. if it's psc which is ver7.x then u might wanna loosen your tRCD to 10 or 11. if it happens to be from micron, which i cant remember what ver is it, then forget about 2000mhz

DDR3 2k does take lot of patients and tweaking.

erm...did u guys change setting for IOH,ICH voltage when do 2k mem??
or just leave it auto??
having trouble to get it stable...
vtt already 1.6v...lol
its normal on R2E i think...

no, ioh and ich are not touched at all. vtt doesn't need 1.6v unless your 920 is still c0/c1 stepping. when you're in the 2000mhz territory, subtimings are very very important. but at first you have to make sure that your rams can do 2000mhz, otherwise it's gonna be very difficult to get stable oc without knowing why your oc is unstable.

owikh killed his r3e bcos of 1.6v vtt last time .
u only need around 1.4v vtt for 2000 ram .
ioh n ich dont have to touch .
if play above 210bclk then only play with ioh iinm .

owh...ok bro thanks...
subtiming??which is??
im pretty sure this ram can do 2k c9 coz i do linx in diagnostic mode and it fail on 18/20 pass...
need to adjust sumting in bios to get it more stable...
vtt below 1.6 cannot boot up and BSOD even on 1.59v...
this ram can do 1600 7-7-7-20 btw...

---

Added on March 1, 2011, 7:09 pmalready try notch by notch from 1.4v to 1.5xv no luck....
1.6v able to linX 18/20 pass and then failed...
vtt = 1.61v-1.62v failed linX 6/20...dunno why

This post has been edited by selfdz87: Mar 1 2011, 07:12 PM

nvr had experience with the r2e .
vtt 1.6v is very high man .

One thing sad about R2E is that it doesn't allow much adjustment on the subtimings. bro did you take a screenshot while you were running linx? if not, I would like to see a shot on your cpu tweaker and turbov showing all the voltages. I think u should try to loosen your trcd for a start, to 10 instead of 9.

ok taikors noted....huhuhu

---

Added on March 1, 2011, 11:30 pmmyb i ll just stick wth 1.6k for now
just need to tweak a little bit on the uncore
it is not yet stable
pass prime95 for 4hours and twice LinX 20 runs but when installing game BSOD
running on 200x20 and uncore 4k

This post has been edited by irienaoki: Mar 1 2011, 11:30 PM

i this helping?

that screenshot doesn't show the ver.... look at the ram label please

ohh really?? pls share some SS
watch out for pwm temp overheat. i dont think u can monitor this vrm temp on R3E.
but 1.6v is seriously too high for non wc. Safest is 1.45v on stock cooling.
if i were u, i will get a 2000C9 and tighten to C8. end of story. save Panadol.

kekeke wokay
tight ram timing and tight budget

yea man .
even 1.4v is very hot already without WC .
dat's 1 of the reason y i stop clocking and proceed with my project .
finally grab the bits waterblock to counter this problem .
no thermal sensor, and its already hot like crap !