memory to OS = 0MB .
priorty = above normal

run in diag mode .

Thanks guys, will give it another shot with what you guys mentioned

btw, owikh. I'm pretty sure all my cores were loading when running linx. we check that in task manager right?

This post has been edited by metsatsu: Feb 26 2011, 04:20 PM

should be all core running 100% during linX .
can try check affinity status in task manager as well .

Ok Seems like selecting priority above normal solves the problem. will try to achieve 2150mhz next. thanks all


This post has been edited by metsatsu: Feb 26 2011, 06:47 PM

what ram r u using man ?
and iinm scale of 4.4ghz with 2k+ ram should be around 67gFlops .
not really sure .

if you look at the cpuz, it says cmgtx3. that's what i'm using

67gflops? owikh84 didn't reach that high at 4.4ghz 2100mhz dram also. where did u see 67gflops?

67GFlops for 4.6GHz bclk 220
65 for 210-215, depends on settings
1 mhz bclk equals to point something GFLops

oh sorry i didnt scroll further .
anyawy, thx 4 d info owikh .
cause wanna try for 4.4ghz .
finally boot up my system .
sadly no internet, cable not long enough to route to my PC .
will post pictures n stuffs on WC .
maybe by next week since i'll be busy tomorrow >.<"
and going back to kajang

thanks to owihk, monsh n ezzydamp + hilmi
run prime95 for 4hours only
my first try on R3E ...quite noob in this



This post has been edited by irienaoki: Feb 28 2011, 10:03 PM

odd multi eg. x21 works better on bloomfield. Turn ON the turbo to make it 200x21=4.2GHz hehe.. but no harm for x20 if it given u a successful run. Temp is ur enemy.

35 idle and 65 max load when running prime95
thinking of pushing it higher but for now ram is my concern....
will give it a try 200x21 with same vcore
possible is it?

This post has been edited by irienaoki: Feb 28 2011, 10:44 PM

golden batch yes.
should go for LinX as well haha..

could try first .
vCore vary depends on chip bro .
yeap even i use 930 oso i use 21x instead of 22 on turbo mode .

---

Added on February 28, 2011, 10:57 pmwhat does prime really push and what does linX really push actually ?
i've forgotten .
seems like sometimes could get solid 12 hours on prime and fail linx instantly or vice versa >.<"

This post has been edited by monsh: Feb 28 2011, 10:57 PM

owh ok
about ram
currently run CM3X2G1600C8D
possible to push it 2000mhz?
how about the timing?
run on 1600mhz 7-7-7-21 but BSOD
then change to 8-8-8-24
superPi 1m took me 10.xxx seconds

try 1600 7-8-7-21/24
tfaw 30
trfc raise a bit
must work around it
not really good at ram timing
try ask owikh .
he's ram lover
try raise voltage as well .
should be able to do 1600 cl7 at 1.61v something like that .
2000 is possible .
try cl9 1st .

hahaha tried on 2000mhz c8 cant boot up

---

Added on February 28, 2011, 11:26 pmcurrent trfc is 72 1600c8
if wanna push to 2000c9 how much to raise?88?

---

Added on February 28, 2011, 11:28 pmwill try linX on 200*21

This post has been edited by irienaoki: Feb 28 2011, 11:28 PM

glad to see this thread alive again...

btw last saturday i manage to grab this new el cheapo ram in pair, Elixir = Rm6x per piece...
yeah,im poor...dont have money to buy GT's like u guys...

but this ram can do 1600 C7,im quite impress



try push to 2000 C9 but no luck...mybe im too noob in clocking ram or my IMC is too weak....

now running 1600 7-7-7-20

This post has been edited by selfdz87: Feb 28 2011, 11:36 PM

yea try 88 and play around with the RTL .
2k cl9 not sure .
try 61-63-65 .
ergh left the clocking on this board for so long .
forgot already the scaling .

---

Added on February 28, 2011, 11:37 pm1600 cl7 should have similar result to 2k cl9 iinm .
yea well imma go back to home this weekend and clock my PC ^^,
1600 cl7 is possible .
i used team elite and tried around 1200 cl6 is bootable and stable ^^,
what chipset not sure .
simply try and successful.
team elite ram used on my AMD rig .

This post has been edited by monsh: Feb 28 2011, 11:37 PM

bad news
2000cl9 but after 10minutes bsod
not yet run on prime95
only few test using superPi

---

Added on March 1, 2011, 12:15 amusing 1.65v
owikh ask me to push @1.7v

This post has been edited by irienaoki: Mar 1 2011, 12:15 AM

if ur willing to try 1.7v go ahead ^^,
what's d vtt u running for 2k ram ?
and try push a bit on the vCore .
maybe low on vCore .