Outline ·
[ Standard ] ·
Linear+
Intel Core i7 LGA1366 & X58 Overclocking V2, Discussion, Benchmarks, Stabilty, Guides
|
gn9746203
|
 Jan 7 2011, 07:20 PM
|
|
QUOTE(monsh @ Jan 7 2011, 06:33 PM) possible its ur ram unstable . btw, y ur running ur ram too low but with high voltage ? try lower the ram voltage . and try exactly double frequency for ur uncore . QUOTE We had to run 1.66 volts for stable performance even at low RAM clock speeds. QPI also needed to be nudged up to 1.3 volts. i tot intel said maintain vdimm and qpi at 1.6 and 1.3 to get stable performance ? actually i dont really know how to oc ram and that is the only setting i can get it boot and stable (for uncore and ram oc)~ This post has been edited by gn9746203: Jan 7 2011, 07:21 PM |
|
|
|
|
|
monsh
|
Jan 7 2011, 08:20 PM
|
|
|
u can get it boot doesnt mean its stable .
intel said a lot of thing .
i think u better refer to 1st page and see how's d setting on owikh84 rig .
dat shud give u basic idea on the scaling of x58 platform
|
|
|
|
|
|
gn9746203
|
Jan 7 2011, 08:48 PM
|
|
|
QUOTE(monsh @ Jan 7 2011, 08:20 PM) u can get it boot doesnt mean its stable . intel said a lot of thing . i think u better refer to 1st page and see how's d setting on owikh84 rig . dat shud give u basic idea on the scaling of x58 platform i know it is not stable ~ and the article about the voltage thing also refer to 1st page's info i am just a newbie and will follow what the review said ~ if follow template i dont really will get the idea and that's y i keep fail n fail and ask ~ that is better learning  This post has been edited by gn9746203: Jan 7 2011, 08:58 PM |
|
|
|
|
|
selfdz87
|
Jan 8 2011, 12:19 AM
|
|
|
|
|
|
|
|
|
gn9746203
|
Jan 8 2011, 02:04 AM
|
|
|
just realise most of people using triple channel and 6gb in oc ..... why ?
|
|
|
|
|
|
monsh
|
Jan 8 2011, 09:04 AM
|
|
|
triple channel gives u boost in benchmark iinm .
but OCing a single ram stick should be easier compared to triple channel .
|
|
|
|
|
|
gn9746203
|
Jan 8 2011, 01:15 PM
|
|
|
arhhh still cant make my 3.8 stable ~ refer to many template but still cant make the ram stable even i pump a lot on it .... grrrr below is the only stable setting but the benchmark is low comparing with my 3.7 setting ~ keep failing when i try to increase the dram freq and uncore  This post has been edited by gn9746203: Jan 8 2011, 01:22 PM Attached thumbnail(s)
|
|
|
|
|
|
TSowikh84
|
Jan 8 2011, 03:42 PM
|
i7 Clan
|
QUOTE(gn9746203 @ Jan 8 2011, 01:15 PM) arhhh still cant make my 3.8 stable ~ refer to many template but still cant make the ram stable even i pump a lot on it .... grrrr below is the only stable setting but the benchmark is low comparing with my 3.7 setting ~ keep failing when i try to increase the dram freq and uncore Something wrong with ur ram settings I can it's running single channel. Curious how do u put ur ram on ram slots? from CPU socket slot A-B-C-D-E-F, dual channel is B+D for ur case. btw, what a waste 1366 running dual channel when the most interesting part of this platform is its triple. |
|
|
|
|
|
Boomeraangkid
|
Jan 8 2011, 04:25 PM
|
|
|
QUOTE(owikh84 @ Dec 29 2010, 06:33 AM) dug out from google for reference only. » Click to show Spoiler - click again to hide... « Ai Overclock Tuner.....................[Manual]
CPU Ratio Setting......................[23.0]
Intel® SpeedStep™ Tech............[Disabled]
Xtreme Phase Full Power Mode...........[Enabled]
BCLK Frequency.........................[185]
PCIE Frequency.........................[100]
DRAM Frequency.........................[DDR3-1403MHz]
UCLK Frequency.........................[2982MHz]
QPI Link Data Rate.....................[6316MT/s]
CPU Voltage Control....................[Manual]
CPU Voltage............................[1.28750]
CPU PLL Voltage........................[1.88]
QPI/DRAM Core Voltage..................[1.35000]
IOH Voltage............................[1.24]
IOH PCIE Voltage.......................[Auto]
ICH Voltage............................[1.20]
ICH PCIE Voltage.......................[Auto]
DRAM Bus Voltage.......................[Auto]
DRAM DATA REF Voltage on CHA...........[Auto]
DRAM CTRL REF Voltage on CHA...........[Auto]
DRAM DATA REF Voltage on CHB...........[Auto]
DRAM CTRL REF Voltage on CHB...........[Auto]
DRAM DATA REF Voltage on CHC...........[Auto]
DRAM CTRL REF Voltage on CHC...........[Auto]
Load-Line Calibration..................[Enabled]
CPU Differential Amplitude.............[Auto]
CPU Clock Skew.........................[Delay 300ps]
CPU Spread Spectrum....................[Disabled]
IOH Clock Skew.........................[Delay 100ps]
PCIE Spread Spectrum...................[Disabled]
C1E Support............................[Disabled]
Hardware Prefetcher....................[Enabled]
Adjacent Cache Line Prefetch...........[Enabled]
Intel® Virtualization Tech...........[Enabled]
CPU TM Function........................[Enabled]
Execute Disable Bit....................[Enabled]
Intel® HT Technology.................[Enabled]
Active Processor Cores.................[All]
A20M...................................[Disabled]
Intel® SpeedStep™ Tech............[Disabled]
Intel® C-STATE Tech..................[Disabled]  bro, i followed this settings to OC and i will try linx now. i changed the CPU Ratio settings to 20.0 |
|
|
|
|
|
monsh
|
Jan 8 2011, 04:39 PM
|
|
|
try 21 or 19 instead .
x58 platform prone to have better result for OCing in odd multiplier iinm .
|
|
|
|
|
|
gn9746203
|
Jan 8 2011, 05:24 PM
|
|
|
QUOTE(owikh84 @ Jan 8 2011, 03:42 PM) Something wrong with ur ram settings I can it's running single channel. Curious how do u put ur ram on ram slots? from CPU socket slot A-B-C-D-E-F, dual channel is B+D for ur case. btw, what a waste 1366 running dual channel when the most interesting part of this platform is its triple. yea i insert it in single channel (E,F)~ because the time i bought this rig no more money for ram so only 2 stick~ actually i am also thinking to add more or just make it double channel so my oc can go on? if it is causing the gap |
|
|
|
|
|
Boomeraangkid
|
Jan 8 2011, 05:28 PM
|
|
|
Added on January 8, 2011, 5:34 pmi tested linx 100 loops. idle at 40-43 for 4 cores. heres a screenshot » Click to show Spoiler - click again to hide... « settings all follow that template except CPU Ratio change to 20.0 This post has been edited by Boomeraangkid: Jan 8 2011, 05:35 PM |
|
|
|
|
|
monsh
|
Jan 8 2011, 05:44 PM
|
|
|
great ! now try push more . try for 4ghz at least . any of the x58 proc could go at least 4ghz iinm . and dont forget to PM me the number of the chix on ur avatar |
|
|
|
|
|
Boomeraangkid
|
Jan 8 2011, 06:58 PM
|
|
|
QUOTE(monsh @ Jan 8 2011, 05:44 PM) great ! now try push more . try for 4ghz at least . any of the x58 proc could go at least 4ghz iinm . and dont forget to PM me the number of the chix on ur avatar bro i sked lah 4ghz  sked my Prolimatech Armageddon takleh tahan |
|
|
|
|
|
selfdz87
|
Jan 8 2011, 07:32 PM
|
|
|
QUOTE(Boomeraangkid @ Jan 8 2011, 06:58 PM) bro i sked lah 4ghz sked my Prolimatech Armageddon takleh tahan try pair ur Armageddon with 2x scythe GT...u will get a better result...  that chick no...i also want...PM me....muahaha |
|
|
|
|
|
monsh
|
Jan 8 2011, 07:39 PM
|
|
|
oi i book 1st !
dont cut line !
btw ur armageddon should do fine with 4ghz .
dont overshoot temp .
dont go over 90 should be good edi
|
|
|
|
|
|
Boomeraangkid
|
Jan 8 2011, 07:42 PM
|
|
|
but my armageddon using 2X orang Xigmatek XLF 14cm fans wor, tak cukup lagi?
|
|
|
|
|
|
monsh
|
Jan 8 2011, 07:45 PM
|
|
|
should be no problem dude .
even now max is only 80 .
should do fine for 4ghz .
i say u better try for more pleasure of OCing .
and also WHERE'S D NUMBER ! ASKED FOR SO LONG EDI !
|
|
|
|
|
|
Boomeraangkid
|
Jan 8 2011, 07:47 PM
|
|
|
QUOTE(monsh @ Jan 8 2011, 07:45 PM) should be no problem dude . even now max is only 80 . should do fine for 4ghz . i say u better try for more pleasure of OCing . and also WHERE'S D NUMBER ! ASKED FOR SO LONG EDI ! no number la bro  OC can feel the diff? i belum try playing my games yet |
|
|
|
|
|
monsh
|
Jan 8 2011, 07:56 PM
|
|
|
OC should feel difference .
but if the game ur playing is already above 60FPS then u wont feel anything different la .
btw, the girl name is camila davalos ? got her prawn ar ?
|
|
|
|
|
Quote
0.0259sec
0.41
6 queries
GZIP Disabled