this is mine on intel platform now will try higher later

RAM = 2x256MB PC2700 Hyundai Electronics
chipset = Hynix BT-J
Vdimm applied = 2.8 V
1T OR 2T = 2T
system = Pentium4 Notrhwood

This post has been edited by Asus: May 17 2005, 07:42 PM


Attached thumbnail(s)

jeng jeng jeng...as Dinster want me to help....

lets see what this baby can do.....












goin to burn in dulu after work....hoping 7.5k barrier....

This post has been edited by antonio_zth: May 17 2005, 10:43 AM

Asus,

what's the detail of this benchmark ?

use the template pls......

updated, sorry2 lupa

dinster...

dunno how will the rams perform...will be testing tommorow...give it sum burnin time...hahahahaha...

300 2 2 3 7 1:1 can ahh u think...

This post has been edited by antonio_zth: May 18 2005, 05:38 PM

After burn in for 12 hours , the best it could do was 257fsb at 3.5vdimm. But the PTS in sandra2005 is even lower than those Twinmos UTT in the ranking , around 6750. I will post up screenie once i'm satisfied with the RAM. hehehe....

lol that is the ocz value winbond utt
same as mine, i just received this morning

Dinster, please update my result

RAM = 1x512MB Kingston Value RAM PC3200
Chipset = Hynix DT-D43 505AA
VDIMM = 3.0V
CPC = ON (1T)
System = AMD Sempron 3000+ (S-754)


Attached thumbnail(s)

Alright , as dinster requested. Here is my OCZ VX Value :

Erm , no idea why the sandra2005 shows 2CMD. Bios shows 1T Timing , shouldn't it be 1CMD ?



Edited :

RAM = 2x512MB Ocz VX Value
chipset = UTT
Vdimm applied = 3.4V
1T OR 2T = 1T
system = AMD64

This post has been edited by winc87: May 19 2005, 02:39 AM

okie one more....


Edited :

RAM = 2x512MB Ocz VX Value
chipset = UTT
Vdimm applied = 3.6V
1T OR 2T = 1T
system = AMD64

This post has been edited by winc87: May 19 2005, 02:39 AM

attention OCZ VX users.. ( OCZ VX Gold / VX Value )

some guide to burn in your RAM !!

make sure u've got active cooling on it !!

8cm fan is enough IMHO..

also applies to Winbond CH5 UTT / BH5 UTT based RAM IMHO..

******************************************************

quoted from RyderOCZ

Hello,

The PC3200 should set 200FSB 2-2-2-10 timings (CAS-tRCD-tRP-tRAS) with 3.2V and let it run memtest for 24-48 hours if you can let it go that long

The PC4000 should be set at 250FSB 2-2-2-10 with 3.3V for the same period

Hope that helps

Oh ya dinster , maybe you should list out the CPU clock speed as it affects the memory score in sandra2005 for AMD64.

hurm.... thanks for the idea.... will edit the template......

btw winc87, u forgot to post CPU-Z memory screenshot.. as u can see Sandra detected ur timing as 2-2-2-2

that's not correct right ?

This post has been edited by dinster: May 19 2005, 04:41 AM

OMG..... Winbond taa pau TCCD kar?




OCZ Platinum rev.2 @ 312 @ 2.5-4-3-6 @ 1T 2.8v

This post has been edited by hippies: Jun 23 2005, 05:51 PM

hippies, try to do 2.5-3-3-6@1T with 312mhz

@dinster
it's a dt-d43, not bt-d43... i've changed my rams already

This post has been edited by soulfly: May 19 2005, 11:56 AM

FYI , the timing is 2-2-2-6.

edited : Where are the other OCZ VX Value users ? Eager to see their results.

This post has been edited by winc87: May 19 2005, 12:03 PM

Nope, if i wanna do a 2.5-3-3-6 I need 2.9V. My principles is not exceding 2.8V, i don't want to heat up my mosfet.

nice OC hippies.......

break 8K mark pls....

This post has been edited by dinster: May 19 2005, 01:56 PM

i tested with my corsair bh-6 twinx,just got 3194mhz with 93% bandwith eficiency,currently at 2.5ghz,how can i increase the raM's results?

wah did my burnin yesterday...some phenomenan has been encountered....such as:

2-2-2-5 1T @ 3.3v i can't burn witout any errors...summore temp at ram chips measure wif aerogate thermal diode...60c....

if put 3.5v oso errors...and temp rise to 78c maXXX.....

i dun dare put in 3.7 since the temp is like that aledi...better dun lar...

but when i tried 2-2-3-6 1T @3.3v it ran witout any errors.....

here are the screenie....










When i saw above 60c i trus get my jet 7 blower trus kasi blow...