wow, 450 fsb on E4400, so d*mn good. someone has told me, some of proc can run till 333, but canno boot up in the range of 334 - 400. so he suggest me to run 401 fsb, but it also cannot la. many of my friends told me my mobo got problemos..

This post has been edited by LittleCordines: Mar 27 2008, 02:21 PM

opps my bad..i misread your proc hehe i thought i saw 8400

anyway since your max fsb is 333, then you have to change your DRAM ratio. so it hits 800mhz

You can run 450Mhz FSB on C2D E4400?
What can i say.."WOW"!!~
My E4400 can hit 399Mhz FSB only, can't go higher..
I think FSB Wall

read carefully la bro, he already made correction n stated that he runs E8400, lol

first test at stock voltages
[attachmentid=428519]

1600fsb native support.

nice clock u got there???cannot go higher than that with stock voltage ker bro??

will post my result later...still scratching for the best setting...right now my xeon e3110 running on 3.999ghz....
hope my ram can be push a little bit more..




This post has been edited by kaiser_falco: Mar 28 2008, 10:46 PM

u need update this bios to get real temp of 45nm E8xxx & zeon e3xxx for DFI X48

http://www.dfi.com.tw/Support/Download/bio..._FLAG=A&SITE=US

my bios is already updated dude..that is my real temp .. actually a bit lower than that.

---

Added on March 29, 2008, 4:28 amraymond this board has hell of a lot of droop even thought the vdroop is enabled

around 0.02v-0.03v on c2d.
should be worse for quaddies.


This post has been edited by cstkl1: Mar 29 2008, 04:28 AM

its untweak

sishh
u always test what ure mobo can do at rated spec

here is with tweaking
have u notice the NB

raymond this is y i love this mobo..
[attachmentid=428951]

actually ran memtest 5 + passes overnight..

oh yeah for ure info temps now higher cause coolit freezone elite on low..

need too if not when i wake up.. will have condensation on the heatsink.


This post has been edited by cstkl1: Mar 29 2008, 09:36 AM

my Xeon 3110 with stock vcore


Attached thumbnail(s)

nice hey raymond
guys in xs says to off the vdropp control to stop the vdroop..

so what the heck is vdroop control for??

control the vdroop get less dropp when full load
just disable it

hmm more like terbalik
use occt
u will see the droop

on cpuz and others too fast to notice..

hey btw
is that nb voltage neccesarry

in the past with maximus i found out higher fsb termination means higher NB
but higher PLL voltage means lower NB..

so usually try to find a balance with the 3.
seems to apply on this mobo..
but it was on the same proc.

sishh they didnt solve the usb issue..
still got


This post has been edited by cstkl1: Mar 29 2008, 01:08 PM

Is Xeon 3110 available for buying?

yup,limited stock
call 0321459886

and also the x48 dfi...hehehe thanks bro..im still strugling got few bsod...carry out ram test ok no error but mat=ybe oc in vista quite headache...also seem like i have to feed voltage to 1.26....after drop it goes to 1.3 to stable...dunno maybe i did something wrong...

whats the diff between xeon and c2d?.... whats the price difference?...

i believe xeon procs have a L3 cache.

For the new Xeons, they are somewhat identical to our E8200/E8400
In the US where some of them couldn't get the E8400, they went for the Xeon and it overclocks just as well.