These two are part of the chipset drivers for nforce4. Go to abit and download the nforce4 drivers and the installation would install these as well as updating all the rest to latest versions.

Plz know the basic of AMD64 overclocking ..
1) Heat is the number 1 enemy
2) HTT or hypertransport or LDT must not more than 1000 in any case. (u might see review can do more .. but there's no significant performance gain with that. So keep it below 1000 to achieve stability)
3) Ur PSU voltage is stable.
4) The most important thing is clockspeed. U wont lose performance as much as other platform if u use divider (set ur ram at lower frequency to avoid ur ram holds back ur cpu)

only the third(3) requirement is not fullfil ..   ..cos still using the stupid i-cute psu..

need help for makin dicision    ...will fsp bluestorm 500w(dinster bulk) will perform better than Acbel i-power gold 500w in term of performance ??? ..

ok done download the driver liaw
the problem is it keep on rebooting my system after i enter my OS
????????????????????????????????????????????????????????????

can someone tell me why this is happend

ok done download the driver liaw
the problem is it keep on rebooting my system after i enter my OS
????????????????????????????????????????????????????????????

maybe u can try plug ur harddisk at any ur fren pc to perform scandisk(tick all the option from the scandisk Option menu).  it works cos i did it once for my fren   ..

hahaha
the hardsk still new
i just enter in safe mode and reinstall everything back to original
is it the software not compatible with the mobo
or??????

hahaha
the hardsk still new
i just enter in safe mode and reinstall everything back to original
is it the software not compatible with the mobo
or??????

Try running your RAM at 2T. Then let me know if it works.

ya now at 2t larrr
why
after reinstall back to the original driver then it ok now
why it hapen like that what cause it problem????????

Well, this board has some problems with some RAMs running at 1T.

that know already but when i already set it to 2t but sill the same result
got connection ka the nvidia driver with the bios problm?????

Not sure though as I've never had issues with bios 17, 18 or even 19 except that the machine gives the same sympton as yours when I set the RAM at 2T. So I thought, it's good for you to try if you haven't.

If you really have issues only wit 19, then revert back to 17 or even 18 if you don't encounter errors with it. The most important is bios 17 where it resolves an apparent cpu temperature issue.

now mine not 19 or 18 nor 17 using the latest one 20 i think

version 20 bios??u sure? r u download from abit official site?

maybe u can try update the bios step by step.. (although normally u wont have to do so) but just try. Good luck~