I couldn't dig the details from tictac in time about the mod's done to it but these aren't Abit official one's for those not in the know. Latency tweaks have been done to it. He just passed it to me 2 days ago and had to ciao after that for his prayers. Would appereciate some feedback about it

sorry to ask in this threat

what software can display 3d card temperature

try the new beta ATi tools. it can shows both ATi and NVIDIA temp.

..............TQQQQQQQQQQ

This post has been edited by emilz: Jan 27 2006, 08:23 AM

http://www.techpowerup.com/atitool/

http://www.techpowerup.com/wiki/doku.php/atitool/start

emilz, not to sound rude. But simple favor like this perhaps you could try on your own first.

sory la itried it already but it said cannot dwnload the software right now i tried in ati catalyst dwnload larrr
then i dwnload from futuremark n that was not the beta version just notmal version
by the way tq larrrr

This post has been edited by emilz: Jan 27 2006, 08:24 AM

emilz... GOOGLE IS YOUR FRIEND

yeah tq for the info man
one more thing is it normal for gpcrd tempreature around 63~65 degree

This post has been edited by emilz: Jan 27 2006, 08:22 AM

normal cause it is a fake temp anyway

any proof of ur words?

when reset, i recommend:

Set 3000RPM for all fans except,

980-1080 for system fan (if u're using standard 120mm fan)

actually, it depends at the fans speed. If it runs at 3500RPM and above at stock, so, there's no hassle to set the minimum speed at 3000RPM.



that's mean that u're not OCing that thing correctly. Try adjust the RAM timing. CMOS will reset to default setting when u're not OCing at the right way.

i think u set ur fsb and ram timing wrong

tried to clear ur CMOS

i think ur HTT too high ady...lower it. my 1 oso same. but after i set to 3X, it wouldn't beep liao...

This post has been edited by shift2: Jan 31 2006, 08:13 PM

My latest OC..using bios 19

210HTT x4 - 3-3-3-7 @ stock vdimm - STABLE
215HTT x4 - 3-3-3-7 @ stock vdimm - STABLE
220HTT x4 - 3-3-3-7 @ stock vdimm - STABLE
223HTT x4 - 3-3-3-7 @ stock vdimm - My computer make BEEP, BEEP and clock, ram timing, HTT reset to default ...wth ? even 2T also same thing...

after reflash to bios 17... problem solve ... why arr ???

Then use back bios 17. There's no pattern that I can clearly identify other than incompatibility of this ram with bios 19.

The reason I say this is because I can run 250htt x 4 using bios 19. Heck, I even managed to have 300htt x 3 with ram multiplier and the pc is very stable.

sorry to ask.
Where can i download this abit fatal1ty an8
1. NVIDIA nForce4 ADMA Controller or
2. NVIDIA nForce4 Parallel ATA Controller
simple say the nvidia latest update
search in abit but cannot found it

This post has been edited by emilz: Feb 2 2006, 06:05 AM

If I'm not mistaken, get the latest nforce4 drivers. That should solve your problem.

These two are part of the chipset drivers for nforce4. Go to abit and download the nforce4 drivers and the installation would install these as well as updating all the rest to latest versions.

Any list of compatible and non compatible rams here?

Plz know the basic of AMD64 overclocking ..


1) Heat is the number 1 enemy
2) HTT or hypertransport or LDT must not more than 1000 in any case. (u might see review can do more .. but there's no significant performance gain with that. So keep it below 1000 to achieve stability)
3) Ur PSU voltage is stable.
4) The most important thing is clockspeed. U wont lose performance as much as other platform if u use divider (set ur ram at lower frequency to avoid ur ram holds back ur cpu)