Hi sHawTY, because we have 2 distributors, would you might PM me the serial number of your router so that I can help you check with them?

Thank you.

This post has been edited by ASUSmy: Dec 14 2012, 12:14 PM

Dear All,

We got a new firmware for the router model RT-N56U. Below is the link. The new version is 3.0.0.4.318.

http://support.asus.com/Download.aspx?SLan..._VER3004318.zip

Fixed
1. DDNS registry problem after upgraded firmware from 1.0.1.8.x to 3.0.0.4.x
2. IPTV UI bugs
3. Server-U UPnP issue
4. UI bugs for mobile device

Modified
1. Update wireless driver
2. Add multicast setting for airprint/airplay
3. allow empty gateway for Static IP + VPN in Russia
4. Add more 3G dongle support: SWU-3220A, SWC-U200, dongles from FreshsTel in Ukraine, YES in Malaysia

Thank you

This post has been edited by ASUSmy: Dec 24 2012, 04:37 PM

Hi ebackbone, regarding your question on the first question, data transfer speed may vary depending on the following conditions:
-Distance between devices
-Presence of obstacles between devices
-Device configuration
-Signal conditions
-Surrounding environment (wall material, device with same frequency, etc.)

You can try set the Channel Bandwidth under Wireless to 40MHz. Channels operating with a width of 40 MHz are another feature incorporated into 802.11n; this doubles the channel width from 20 MHz in previous 802.11 PHYs to transmit data, and provides twice the PHY data rate available over a single 20 MHz channel.

As for the second question, please refer to the image below, have you enabled the WAN network connection?
And has you created a DDNS to use to connect back to you router. If no you can create it at WAN section.

After created, you can access it by putting the default port number at the of the DDNS.
Example
http://(host name).asuscomm.com:8081

As for the third I think you can try ask the people from DD-WRT forum.

Thank you

We have created a new topic for networking supports, below is the topic title and the link to it. If you have any networking problem you can post on it.
ASUS Malaysia Networking User & Technical Support
http://forum.lowyat.net/topic/2651405/


Attached thumbnail(s)

Hi kevin_kwfoong, have you do a factory reset after you update the latest firmware? And will serving Internet having this problem also?

Thank you.

We have created a new topic for networking supports, below is the topic title and the link to it. If you have any networking problem you can post on it.
ASUS Malaysia Networking User & Technical Support
http://forum.lowyat.net/topic/2651405/

This post has been edited by ASUSmy: Jan 9 2013, 10:43 AM

Hi kevin_kwfoong, yes hold it for 5sec and the power LED will blink then release it. After that, you redo the setting see the problem still persist or not.

Thank you

Hi Simon, have you try updating the firmware to the latest to test? Try use your user name and password on the TM website to see the password is correct or not? If can do you mind sending me the configuration files for the router RT-N66U? I will PM you my e-mail address.

Thank you

We have created a new topic for networking supports, below is the topic title and the link to it. If you have any networking problem you can post on it.
ASUS Malaysia Networking User & Technical Support
http://forum.lowyat.net/topic/2651405/

This post has been edited by ASUSmy: Jan 11 2013, 05:05 PM

Hi ww_lky, regarding the crashes issue when plug in the 500GB HDD on the router, you can try update the firmware to the latest and see still the problem or not.

http://support.asus.com/Download.aspx?SLan...N16_3004260.zip

As for the YES USB broadband, we are still testing on it with our router, current model that we are testing on it was RT-N66U. Hope can finish testing for all the models that can support 3G/4G ASAP.

Thank you

We have created a new topic for networking supports, below is the topic title and the link to it. If you have any networking problem you can post on it.
ASUS Malaysia Networking User & Technical Support
http://forum.lowyat.net/topic/2651405/

This post has been edited by ASUSmy: Jan 14 2013, 11:32 AM

Hi silverbolt143, we unable to set the priority for the bandwidth in Quest Network for RT-N66U. We only able to set the times and the accessibility for intranet.

We only able to set the bandwidth priority under Traffic Manager. At here you can set the speed for each level of priority by IP or MAC address.

Thank you

We have created a new topic for networking supports, below is the topic title and the link to it. If you have any networking problem you can post on it.
ASUS Malaysia Networking User & Technical Support
http://forum.lowyat.net/topic/2651405/

This post has been edited by ASUSmy: Jan 14 2013, 11:31 AM

Hi digilife, if your modem indicator LED got light up mean there is current going in to the router. Try unplug the USB modem see the device can power up or not. If still cannot it is advisable to send the unit for warranty claim. Our network device have 3 years warranty. You can try send back to the place you bought.

Thank you

We have created a new topic for networking supports, below is the topic title and the link to it. If you have any networking problem you can post on it.
ASUS Malaysia Networking User & Technical Support
http://forum.lowyat.net/topic/2651405/

This post has been edited by ASUSmy: Jan 14 2013, 11:40 AM

Hi MichaelLTR, you can change the SSID after you search and connect to the network. Once you click connect, you will be ask whether you want to use back the same SSID and password. If you don't want, just untick the check box and key in the SSID and password that you want. Please refer to the youtube below at time 0:48.

http://www.youtube.com/watch?v=WFl0fT-ame8

Thank you

We have created a new topic for networking supports, below is the topic title and the link to it. If you have any networking problem you can post on it.
ASUS Malaysia Networking User & Technical Support
http://forum.lowyat.net/topic/2651405/


This post has been edited by ASUSmy: Jan 21 2013, 02:29 PM

Hi 3shen, currently we don't have any new firmware for RT-N13U B1. If you still facing the same problem after updated the latest firmware, do send the unit for warranty claim.

And if you following this thread, there is a user posted a customized firmware and found that it is more stable. You can have a try if you want.



Thank you

Hi xiuhan83, please make sure that the ISP profile under IPTV is applied. Make sure the modem is up and connected to the WAN at RT-N66U.

If it is still happen, please let us know what kind of error does it pop out when you set up the connection?

What is the firmware version you are using? You can try update it to the latest, you can download it from the below link.

http://dlcdnet.asus.com/pub/ASUS/wireless/...66U_3004270.zip

Thank you

Hi odin88, you can search this model by using the search function at the top right.

If you are facing difficulty searching the model at Malaysia website, you can always the global website

http://www.asus.com

Thank you

This post has been edited by ASUSmy: Jan 31 2013, 05:58 PM

Hi dimenxion, you can leave the destination port blank. By doing so, the device with the IP/MAC will apply this feature with to all the Internet application.

Thank you

Hi dimenxion,

If you would like to have a try on our beta firmware for this model? It will change your GUI to our new GUI ASUSWRT.

Here is the link to download the firmware.

https://www.asuswebstorage.com/navigate/s/2...4A95EB2BF52C95Y

You are require to do a factory reset before and after you update the firmware. And to update you will require to follow the step on the youtube.

http://www.youtube.com/watch?v=HIoQ5Qd11pU

Here is non video guide for your reference.

http://support.asus.com/Search/KDetail.asp...648FE6C1D6D&t=2

Thank you

Hi dimenxion, ya you need to use rescue mode. If not you will not be able to flash the firmware.

Thank you

Hi mlan4, have you try do factory reset and redo the setting? If the problem still persist, do send the device for warranty as our networking device have 3 years warranty.

Thank you

Hi dimenxion,

In your setting, it’s right. Can I ask why your download seems lower than upload? It’s weird. Maybe can make download bandwidth larger.(depends on user)

1. The first six devices will follow “Highest”(upload : 11.2~16M), all of them will share the upload bandwidth, not download bandwidth.
Download bandwidth depends on upload bandwidth, and we share the bandwidth of “highest” priority(totally : 16M), the six devices will compete each other to get higher bandwidth.

2. Transferred : if you set 0~512, it means when recorded packets is inside the range, they will follow priority “medium”,
but if out of range, it will follow “Low”(it’s default setting for other packet, they are not marked by any rule).

3. If point 2 and 3, you want to let “80,443,8080” to get up to 5M and the rest to get up to 2M(in user’s setting, it seems to 2M, not 1M),
you should modify “user-defined priority” to suit the right bandwidth.

And if the rest want to use “Low”, they also don’t need to build any rule, because default is “LOW”. It means if no match any rule as user defines, packets will follow priority “LOW”.

As for the VPN, what error mesagge you get or which part that cannot worK?

Thank you


Attached thumbnail(s)

Hi dimenxion,

Great, you can have a test on this setting see it serve you correctly. What about the VPN server, can you configure it?

Thank you

Hi dimenxion, if you don't mind, can you e-mail me the log files, configuration file and image of the error?

I will pm you my e-mail. And will pass the information to our RD to check.

Thank you