true2...what wc parts r u using

1) EK Supreme HF - Copper Plexi
2) EK Dominator Ram Block - Nickel Acetal
3) Swiftech MCR-320QP Radiator (360mm)
4) Swiftech MCP-655 With Speed Control
5) XSPC D5 Dual 5.25" bay Reservoir
6) PrimoFlex Pro LT 1/2" 3/4" Tubing
7) Bitspower MatteBlack Compression Fittings 1/2" 3/4"
8) Scythe Gentle Typhoon 1850rpm
9) Aqua DP Ultra

My gpu no water block yet...

might as well install mobo chip block,,

can someone tell me wat is the purpose of the tube inside bitspower z multi? zzzz

wrong info

This post has been edited by Norazam: Sep 14 2011, 09:16 PM

i tot u are serious put ccfl inside. lolx

i believe when ur res is lower than other blocks u need it to stop the water from flowing into the res when u are not running ur pc. becz when water fill your res up to the top it will leak somehow.. i guess. will someone correct me if i am wrong

hahhaahah tired installing the wc today.. thats why got wrong info

nicee

ahh,our wc bro from oversea...may be u can enlighten us the purpose of the tube inside the multioption res

nice setup bro

easy, dont fill them up until the end .
3/4 of the res shud be more than enuf

the tube up there is needed if use the top cover as inlet.
look at my GPU loop.
like this i don't need to fill coolant to the whole res.

thanks


thanks just showcasing my rig because of all the wc parts you can see were bought there in malaysia, from a super nice seller named ezzy

about the tube inside the res, well, i dont know much about science but my mind tells me that having a tube inside that res will push the warm water coming from the whole system on top of the water inside the res, cool it down a little so the pump will suck cool water instead of the warm water coming from the radiator below. i dont know, its just me hehe.

but hey, thanks again!

This post has been edited by Indulgence: Sep 14 2011, 10:04 PM

i plan to install also, google youtube last minutes untill now still do sketching.

Sayang my expensive tube. lolx

bear with me a little,hehe

i think la kan3,the tube act as air bubble eliminator and coolant threshold.if the water is under the tube,u should add more coolant and if the tube is submerge in the water,chances of air bubble forming is very little provided that the pressure in the loop is strong(?). but this is provided the res is in upward position

crazy isn't it

in Dennos case, afaik in lyn wc thread,most multioption are positioned like bro owikh,indulgence n alamaklor...

where is the hardisk?

---

Added on September 14, 2011, 10:25 pmi think he only have ssd. lolx

This post has been edited by Dennos: Sep 14 2011, 10:25 PM

actually so many use laa the tube. it also use to avoid air bubble from going back to the pump if ur inlet and outlet too close.

can you guess where?

actually its in the 5.25" drive bay.


this!

actually i have the same problem the thing i buy tooooooooooooooo big, the hardisk cage is f

just got my case from powder coated..