AMD® Socket AM2&AM3 Overclocking V23, It has come!Bulldozer heat is around us.
|
|
 Jul 21 2010, 07:45 PM
Return to original view | Post
#61
|
 
Elite
8,103 posts Joined: Jan 2003 From: Tanah Lot @ Dungun, Terengganu.  
|
QUOTE(cloudwan @ Jul 21 2010, 05:04 PM) I think i may have face the same issue before, just didn't cross my mind to check with AOD, no wonder most oc is hard to get blend stable.. alasan nak tuka mobo je tu...    |
|
|
|
|
|
Jul 23 2010, 09:29 AM
Return to original view | Post
#62
|
|
Elite
8,103 posts Joined: Jan 2003 From: Tanah Lot @ Dungun, Terengganu.
|
QUOTE(verdict @ Jul 23 2010, 08:19 AM) He He He...ada je kat sini, cuma monitor je apa yg terjadi~ oh... rupe2 nyer sis verdict is watchin over us here...  Anda semakin liar ye...ada saja racun serangga dan senjata baru ye...  how's d road to recovery sis, hopefully all went well for u. been there b4 but not as serious as yas, it's hard to sit in d house barely do anything...  abang otroman leni upgrade like no tomorrow, guns blazin w/ x3 440, ahsos 880 edisi spesial, x-fi dan lain2 lagi... tersepak duit di tepi jalan kot.... jeles nyer...    @ selferino, how bout load temp? 384 = small fft, mite cause by cpu instability. how bout 13 * 300 instead? This post has been edited by ah_khoo: Jul 23 2010, 10:39 AM |
|
|
Jul 23 2010, 10:34 AM
Return to original view | Post
#63
|
|
Elite
8,103 posts Joined: Jan 2003 From: Tanah Lot @ Dungun, Terengganu.
|
QUOTE(8tvt @ Jul 23 2010, 10:27 AM) how come x3 440? x taulah bro, siggy dier tulis cam tu... mebe bored playin w/ BE chip, nak challengin ckit... This post has been edited by ah_khoo: Jul 23 2010, 10:34 AM |
|
|
Jul 23 2010, 10:49 AM
Return to original view | Post
#64
|
|
Elite
8,103 posts Joined: Jan 2003 From: Tanah Lot @ Dungun, Terengganu.
|
QUOTE(8tvt @ Jul 23 2010, 10:46 AM) downgrade topup ram? downgrade then upgrade to 1090t kot?  |
|
|
Jul 23 2010, 03:03 PM
Return to original view | Post
#65
|
|
Elite
8,103 posts Joined: Jan 2003 From: Tanah Lot @ Dungun, Terengganu.
|
QUOTE(cloudwan @ Jul 23 2010, 11:20 AM) Mana upgrade mah, downgrade kire tersepak duit tepi jalan ke? Bukan tergolek tersepak kayu ka? :/lol: kontroversi ke spekulasi ke... kite tunggu & lihat ajer... Stat lah tuh mau timbulkan kontroversi, no ram lor just plain old cpu :/w :/w :/P QUOTE(selferino @ Jul 23 2010, 12:45 PM) load temp was like 62-63C,(coz of the high volt i need to pump), tried lower volts, cant get to stable above 512k ffts, keep getting blue screen(hardware failure n bla3). 300 HTT? i got BE, just use multi, if wanna play wif bus, alot of stuff need to be done, maybe downclock my ram first or whatnot? try these:ht link @ 7 * 300 nb freq @ 8 * 300 ram near 1333/1600 (depend on how well it clock) vhtt @ 1.3v vnb @ 1.25 vimc @ 1.25~1.275v vcore stay below 1.5v. QUOTE(selferino @ Jul 23 2010, 01:54 PM) here's my my latest priming stable using fft option(max 1024k MAX to 128k MIN), 1 minute per test(thou sumtimes they go more thn 1 test, like to test for some FFT, weird :/stars: :/stars: :/stars: ) i always use customed blend test, min @ 8, max @ 4096, minute = 1[attachmentid=1689615] this time my CPU-NB i put 1.25v only rather thn 1.4v, my cpu volt still the same(1.47v in bios but it will always be lower using Everest, CPU-Z n HWmonitor), CPU-NB speed still at 2600MHz, tats all i change, but weird my second worker(2nd core) got fatal error, but my other workers still fine n manage to pass the test( izzit bcoz i enable rounding check error?) :/stars: well i dunnno, dun tell me i got defect core :/(. max temps it hit was 61 C, but for a while it will drop back even at 58 C constantly when the test progress, man OC is fun but pening siot!!! not all core have d same capability, there is/are always weaker core(s). weaker core(s) != bad core(s) thou, AMD never guarantee all d cores in their chips have d same mileage, unless we are talkin bout stock clock.  This post has been edited by ah_khoo: Jul 23 2010, 03:44 PM |
|
|
Jul 23 2010, 08:58 PM
Return to original view | Post
#66
|
|
Elite
8,103 posts Joined: Jan 2003 From: Tanah Lot @ Dungun, Terengganu.
|
from d manual in MIT:
cpu clock ratio = cpu multi cpu nb freq = cpu nb aka nb freq multi cpu host clock control = htt pcie clock = pci-e freq ht link freq = ht link multi set mem clock = mem divider dram config = mem timing set sys voltage ctrl = manual d rest like what mentioned b4. quite direct if u ask me...   |
|
|
|
|
|
Jul 23 2010, 09:12 PM
Return to original view | Post
#67
|
|
Elite
8,103 posts Joined: Jan 2003 From: Tanah Lot @ Dungun, Terengganu.
|
QUOTE(selferino @ Jul 23 2010, 09:04 PM) owh yeah my mistake, no otption for ht link multi, only freq, n no option for ht link volt setting. MSI still has these as far as i can remember, why not gaygaybyte? shud i use AOD instead? but thn evertime i OC, like if i set the bios for cpu vcore at 1.47v, n thn go into windows n open AOD, it willl read at the default volt(1.4v), same case goes to the cpu-nb volt. but AOD alwat gets the cpu freq ryte( so does cpu-z can't be... if ur not gettin what u see (after pressin ctrl + f1 in bios main page) as d ss posted, then something wrong with d bios. have u tried other version of bios? msi bios is decent but i'll take award bios anytime anyday if d board can match what i wanted. never trust aod as its compatibility differ from boards to boards. i trust cpu-z & hwm more. some more, u got easytune & d wattage monitor tool there w/ u, why not make use of it? ) |
|
|
Jul 24 2010, 01:33 PM
Return to original view | Post
#68
|
|
Elite
8,103 posts Joined: Jan 2003 From: Tanah Lot @ Dungun, Terengganu.
|
QUOTE(shinjite @ Jul 24 2010, 12:27 PM) 1090T not worth the price paid....its freaking RM300++ higher ~_~ exactly bro, i'd rather spent those money on better coolin or ram... those hyper sticks look yummy... QUOTE(ConquerorX @ Jul 24 2010, 12:31 PM) Perhaps I should be getting a 965BE rather than 1090T?  QUOTE(shinjite @ Jul 24 2010, 12:47 PM) You are better off with the 1050T support 110%... 1055t clocks better than 965be while bein slightly more expensive only... btw, i woke up this morning & saw this on my dining table...  
a message from santa clouds, he said if i'll be a gud boy, i can have d gift for FREE... 
& w/o further delay i opened up d box... can't wait to see what's inside...  » Click to show Spoiler - click again to hide... « woah!!! it's an early x'mas gift... thx santa!!!!  then i put d gift into my trust worthy edisi spesial 690g board w/ dark brown pcb + converter (since am3 chip can't fit into am2 board)... » Click to show Spoiler - click again to hide... « finally, d torture begin... testin now so fingers crossed for what d gift from santa can do... |
|
|
Jul 26 2010, 07:00 PM
Return to original view | Post
#69
|
|
Elite
8,103 posts Joined: Jan 2003 From: Tanah Lot @ Dungun, Terengganu.
|
QUOTE(cloudwan @ Jul 24 2010, 07:22 PM) I sokong for the 1090T tho since no user in LYN yet, wanna see how it rawks :/drool: :/P got bro, sir Louislkw still testing his i think... i'd rahter wait patient than to rush him for d results... Aiyooo bro the box looks :/sweat: :/sweat:, sometimes ah these postal workers :/x :/x i think still ok lah for d box, kemek abit only... i've seen worse trust me... thumbs up for d delivery time... never expect to receive d gift early in d morning on saturday... QUOTE(selferino @ Jul 25 2010, 01:36 AM) bro ah-khoo, do u enabled in place fft(tick or untick the box) ? btw, evertime i set the min to 8k, the 1st test will run at 1024k, 2nd test straight go to 8k, 3rd test go to 10k, 4th test only go to 896k, 5th test go to 768k but thn the next test go back way down to 12k. izzit like this in between one? i see u do ur prime always end wif 8k one, why my one liddat? small fft, min @ 8, max @ 512, minute @ 1, check box checked > test cpuanyways, wanna share my minimum under-volt using stock speed of my clock(from 1.4v to 1.25 :/) ) C!E and CnQ enabled [attachmentid=1691854] custom-ed test, min @ 8, max @ 4096, minute @ 1, check box unchecked > blend test a.k.a test everything blend test always starts w/ 1024, then small 8, 10 & so on... my ss always show 8 coz w/ d setting mentioned above, test manage to finish 1 round (actually slightly more) within an hour. that's why u always see 8 or 10 (or other small fft) when i capture d screen. QUOTE(kuntawakaw @ Jul 25 2010, 09:06 PM) kinda silent here today..lemme update an SS.. kekeke.. nice job there... now who's d pro... [attachmentid=1692904] not impressive but with 20mhz shoet, i able to tighten somemore..   me still havin hardtimes tamin d 955... i overestimated my kung fu this time...  |
|
|
Jul 27 2010, 01:10 PM
Return to original view | Post
#70
|
|
Elite
8,103 posts Joined: Jan 2003 From: Tanah Lot @ Dungun, Terengganu.
|
QUOTE(kuntawakaw @ Jul 27 2010, 11:15 AM) yeah..except the price..kekeke.. me ram idiot... 2k rated sticks i only managed a 1.82xk only... great job there... 1333 @ near 1600 @ 7-8-7... what's d vdimm? is it 1.8v as mentioned b4... can't be d9 in disguise coz d9 should have no issue doin 7-7-7 all d way? how high u can go @ 7-7-7? @any ram master esp ah_khoo [attachmentid=1695660] left is now setting.. right is few days ago setting.. y i saw some gone slower.. as pic, the timing is greatly tightened..any other same setting.. normally i run the benchmark for 2 times and more.. so that i can say the app not influenced by uncertain factor (like cpu and mem on load that might affect the reading accuracy) i just run some MS word that i dont think might effect the reading.. again mat rempit like me doesn't care d benchy no...  QUOTE(cloudwan @ Jul 27 2010, 12:05 PM) Haiyahhh so very the tension, ah_khoo i take back all my intended goals already, this is the besh i could do for now: haiya... u seems to have less luck most of d time bro... nevermind, there's always next time... especially d 95watter... » Click to show Spoiler - click again to hide... « Just forget about the ram speed, donno why with this X6 my ram cannot even run at 1.4ghz regardless of the ram volt i pump, it will always causes one of the core to get an error during priming.. :/stars: Maybe its a sign from high above that i should not mix high oc with this cheapo KVR :/lol: Hate the cpu volt also, donno why with the ahsos board set whatever volt it will always overvolt :/x I set 1.4v actually but during priming it would sometime shoot up to 1.45v :/stars: :/sweat:  as for d ram, have u tried ganged mode? i know it mite not be d issue but noob like me will try almost everything i can think of b4 i give up. it worked when i was on 790fxt back then. from what u mentioned even change of ram slot doesn't help rite? could be imc issue... dark sticks can do 18xx w/ 635 on 690g but it's diff w/ d 955 (even on d same board), guess what they say is right (that chip w/o l3 cache can push ram [in some case nb freq too] better). i'm too tired w/ d infinite reboot @ high clocks, gonna stop else i mite kill my wd black & blue... ermm... it's a sign that u need a pair of decent ram so that u can push those sticks until u forget bout d cpu clocks. team dark 2k (i saw someone sellin d lower volt [1.6v, my fren's is 1.65v]) + a 'lil top up for d 955 for u bro? This post has been edited by ah_khoo: Jul 27 2010, 01:56 PM |
|
|
Jul 27 2010, 02:29 PM
Return to original view | Post
#71
|
|
Elite
8,103 posts Joined: Jan 2003 From: Tanah Lot @ Dungun, Terengganu.
|
QUOTE(cloudwan @ Jul 27 2010, 02:19 PM) hmmm haven't tried unganged mode yet, i tried & tried with different settings until 2am yesterday almost make me wanna vomit bcoz oc'ing woah....that's d spirit bro, me can't afford to do that coz i can't just stay at my fren's house until late morning... later i reach home my wife ask me to sleep outside d bed room Will try again if i can muster up some semangat tday Huh? What do u mean bro? I need to top up or the 955 buyer will topup? i gave up ledi to be honest...  should d chip get gud offer, it's gonna be team dark 2k lv (1.6v, not 1.65v) + some cash (around $10~$20) = ya 955BE, what say u bro? This post has been edited by ah_khoo: Jul 27 2010, 02:32 PM |
|
|
Jul 27 2010, 02:45 PM
Return to original view | Post
#72
|
|
Elite
8,103 posts Joined: Jan 2003 From: Tanah Lot @ Dungun, Terengganu.
|
QUOTE(cloudwan @ Jul 27 2010, 02:39 PM) Arghhhhhhh racun, racun.. huhuhu... fingers crossed bro, i mite not gud in oc, but i'm pretty good in sellin/buyin... should consider change of career eh? Pening already.. Seems naise if it's possible will update u tonite... |
|
|
Jul 27 2010, 03:13 PM
Return to original view | Post
#73
|
|
Elite
8,103 posts Joined: Jan 2003 From: Tanah Lot @ Dungun, Terengganu.
|
QUOTE(8tvt @ Jul 27 2010, 02:56 PM) it's TEAM ler.. performance ram is what he lacked of now bro, thuban = checked, luxury board in CHIV = checked, performance ram in Team Dark 2K LV CAS 9 = soon to be checked... Added on July 27, 2010, 2:57 pmi ada bau X6 dgn sate.. i dunno whether i'm responsible for all these upgrades, if i do, i do hope bro cloudwan forgive me... QUOTE(selferino @ Jul 27 2010, 03:00 PM) x penah ak dgr TEAM rams.... wuuu, cloudwan ade x6, 125watter ke 95watter 2??? it's a 125watter. thuban is nice regardless 95 or 125watter... |
|
|
|
|
|
Jul 27 2010, 03:24 PM
Return to original view | Post
#74
|
|
Elite
8,103 posts Joined: Jan 2003 From: Tanah Lot @ Dungun, Terengganu.
|
QUOTE(cloudwan @ Jul 27 2010, 03:10 PM) Not just fingers, i'm even crossing my legs if must know got leh bro, here is d link:BTW bro, i am finding it hard to find any details of the Team Dark 2k LV ah, only find the 1.6k version, is it the same? PC3 16000 DDR3 LV 2000 MHz CL9 (2*2GB) from what i know: 1600 lv CAS 7 (1.65v) 2000 lv CAS 9 (1.65v & latest version is 1.60v) QUOTE(cloudwan @ Jul 27 2010, 03:16 PM) I will never forgive u bro, lol... u no need to sumpah i already eatin maggie mi every day... u sumpah lagi i can only eat biskut w/ milo...  i sumpah u will makan meggi like me smpi we get rich someday  get rich someday??? like that i need to start buyin ekor ledi... This post has been edited by ah_khoo: Jul 27 2010, 03:44 PM |
|
|
Jul 27 2010, 04:20 PM
Return to original view | Post
#75
|
|
Elite
8,103 posts Joined: Jan 2003 From: Tanah Lot @ Dungun, Terengganu.
|
QUOTE(cloudwan @ Jul 27 2010, 04:17 PM) Ya ka? I thought the green color is also just coloring? So expensive meh just to use black coloring instead of green? u can oc 'em until hangus or just spray d pcb black if havin black pcb ram is a must bro... |
|
|
Jul 27 2010, 07:39 PM
Return to original view | Post
#76
|
|
Elite
8,103 posts Joined: Jan 2003 From: Tanah Lot @ Dungun, Terengganu.
|
QUOTE(cloudwan @ Jul 27 2010, 04:44 PM) Hahahaha, no need, got some black magic marker back at home, i can just paint2 using them magic pen tu zaman kite org bro... dorang still pakai magic pen ke? QUOTE(selferino @ Jul 27 2010, 06:19 PM) this team dark, same brand as those TEAM ELITE ramsticks eh? the rams wif heatsinks. btw,their ddr3 1333 cl9 vs KVR ddr3 1333 cl9,which is better? or they r the same? Team Elite is better, bro kunta proved that. if u can get 1600 version better, very impressive but nothing guaranteed as value ram is more of lucky draw... btw if just OC ram, playing around wif the latency, wut settings shud i check/uncheck, fft min/max size in prime95(bro ah_khoo, if u can answer this, would be nice ) i will use blend test for ram testing... min @ 8, max @ 4096, minute = 1, ram size = half of total physical mem. |
|
|
Jul 27 2010, 10:23 PM
Return to original view | Post
#77
|
|
Elite
8,103 posts Joined: Jan 2003 From: Tanah Lot @ Dungun, Terengganu.
|
QUOTE(kuntawakaw @ Jul 27 2010, 09:22 PM) yeah...1.8vdimm in bios 1.81vdimm by hwmonitor.. try w/ 1.8xv @ 7-7-7, see how high it can go. u got active coolin there, won't hurt if u just prime it for an hour or 2... 7-7-7 with this setting will make it refuse to reboot.. later i try with 7-7-7.. ok..enough 1month play with same HW.. need change.. hope got ppl intrested in my mobo soon.. i think i pushed enough.. nk gak jadi mcm abg cloudwan, asek tukar..his PC is the most powderful now..here.. accept the memory la :/sweat: :/sweat: but soon to be right?kekekek Added on July 27, 2010, 9:28 pm so ka? cuz i always use large >custom > 3mins (since sometimes i found 1min not enough to stress.. or 2mins if want to make it quick..) so it will become min@8, max@1024, in place FTT and 3min.. will try ur suggestion.. which detects faster.. yalor, jeles tengok bebrg high end abg cloudwan aka santa cloud... QUOTE(kuntawakaw @ Jul 27 2010, 09:46 PM) makan megi 24/7 eh? lpas makan, makan lg..makan lg..24jam makan je..kekeke bab tu dorang kate mee maggi cepat dimasak sedap dimakan, can cook anytime & be eaten many2 times... i'm oso d regular btw... what happend to ur evo? kalau ade...ape salah tolak kat saye.. kali ni bayar abis QUOTE(cloudwan @ Jul 27 2010, 09:58 PM) Hahahaha, itu evo suda beli & suda bayar, pastu kena racun bro 8tvt trus pulang balik angkat itu CIV lor :/x :/lol: :/P bro, it was a great deal so no regret, to me at least. if only i'm stayin there & have d |
|
|
Jul 27 2010, 11:06 PM
Return to original view | Post
#78
|
|
Elite
8,103 posts Joined: Jan 2003 From: Tanah Lot @ Dungun, Terengganu.
|
QUOTE(cloudwan @ Jul 27 2010, 10:45 PM) Huh satu lagi, what high end mahal skit jer, not like i went for a aiseben ke apa ala... ade aje alasan, kalu ati dah nekad nak upgrade, ape buleh buat kang? Yup, it's a one in a kind deal, not so many time that we can find offer like that, the price plak was sooo hard to resist My 1st time using highend mobo bro, u suda brapa kali dapat, let me enjoice for once lah, hahahaha me where got high end board, xkan 690g pong kire high end meh?  reply me pm leh... QUOTE(kuntawakaw @ Jul 27 2010, 10:56 PM) itu otromen mmg..poison kuat tp die immune 1.8v only still ok lah i think, some more u actively cool 'em. it's been a while since i actively cool my ram... ive been torturing these sticks quite alot.. prime before sleep..so around 5-7 hours of prime.. but depends la..sometimes fail so not reach 5hours.. if quick prime, it will as long as 1 ep of J-dorama..around 40mins.. u think will degrade? kekeke.. not gila like antonio..push more then 2.0vdimm.. is the fast degradation lead to the slower result i posted? will try later.. these few days i have lotsa work.. so cant tahan sabar kalau selalu restart/bsod.. if tighten slowly and large stress, the possibility for system to restart is low.. fail only..if fail still ok..can tahan,, yup, restart is d most annoyin thingy one could have in primin... especially when u have a quite new hdd... |
|
|
Jul 28 2010, 07:04 PM
Return to original view | Post
#79
|
|
Elite
8,103 posts Joined: Jan 2003 From: Tanah Lot @ Dungun, Terengganu.
|
QUOTE(cloudwan @ Jul 27 2010, 11:14 PM) Hahahahaha, tau xper, 690G tuh mobo skrg bro, yg dulu apa cerite, DFI 790FX lah, MSI GD70 lah.. Kira highend lah tuh :/sweat: :/lol: all those boards considered as loaned set only... i barely keep 'em more than 6 months... d trend back then was buy, test, sell (coz no money to buy maggie). now d 690g is to be kept for long2 time unless i terkick bag of $$$ like u or sis verdict... QUOTE(kuntawakaw @ Jul 27 2010, 11:52 PM) ah khoo.. if can do 1500 @ 7-7-7 w/ < 1.8v consider quite gud ledi... u can check which settin (higher mhz w/ laxer timing or lower mhz w/ tighter timing) is better by usin memtest (dos). tried 7-7-7..and any other subtiming same as before.. 155Xmhz also show signs of instability.. CCC refuse to start.. firefox sudden crash.. and i dont even bother to prime.. so before it restarts, i restart 1st..ekkekeke.. QUOTE(saturn85 @ Jul 28 2010, 01:00 PM) hey, anyone here know how to set, when bsod occur, don't restart instantly? my computer > property > advance > start up & recovery > system failure > uncheck automatically restart. i want to see the blue screen error code, but it instantly restart, so i cannot see. :/sweat: QUOTE(verdict @ Jul 28 2010, 06:34 PM) Yo ah_khoo bro...you are the owner on Team LV right? what was the highest you hit with those LV? i just curious and jealous of it... :/x i'm not d owner sis, my fren owns d team dark which i tested on his rig. under my hands of noob, highest was 1820 @ 7-8-7 w/ 1.725v. could be better under thuban i supposed. And please do let me know the tight timing you play on it... ;/) I really need a good pair of ram at this moment,but kakak kata STOP!!! :/sweat: http://forum.lowyat.net/index.php?act=Atta...post&id=1686159 This post has been edited by ah_khoo: Jul 28 2010, 07:05 PM |
|
|
Jul 28 2010, 09:39 PM
Return to original view | Post
#80
|
|
Elite
8,103 posts Joined: Jan 2003 From: Tanah Lot @ Dungun, Terengganu.
|
QUOTE(verdict @ Jul 28 2010, 09:30 PM) Im getting better, just ada kebocoran sedikit di tangki simpanan air... woot... is that adata sis? if so give 'em more... they're capable fantastic freq @ tight timing iirc... You already play with x6 biatch'... here some simple ss for fun / for the come back...  [attachmentid=1698363] |
|
Topic ClosedOptions
|
| Change to: |  0.0443sec
 0.70
 7 queries
 GZIP Disabled
Time is now: 5th December 2025 - 06:55 AM |
Quote
