Here is another 1055T OC result at default voltage  . Try to push into 4Ghz but not stable with 1.35v and it is very hot! like 65C++ 

Khoo Sir, you are here... Spotted..  :/hyper:

Thanks...had a lot of cakes and fizzy drinks today.... :/clap:

now cloudwan speaks like a true OCer..

done stressing the ram pair.. just with the same timing with diff vdimm and freq.. not a total let down la.. later update result.

this pair is really pocket frenly.. rm290 total.. even KVR selling at 150++ and i know tweaking KVR will be sucks..

1600mhz not sighted anywhere.. Sg selling how much there unker?
mebbe i settle with these rams only... with my current salary, i might have stop OC..

considering the average wage over there is far higher compared to here, that 159$ is ok right..

these module kindda hot.. near to tracer.. so i afraid to put more vdimm..last time 1.8v still not sked.. now only limit myself for 1.7v.. later need hang fan there and push further..i hope can la.

Huhuhuhu, same here, with the amount of debt i'm collecting, its lucky that i'm able to use my KVR at all..
Wish i can play2 with new value rams like Gskill or Team elite like kunta is playing   

Kasi gantung satu kipas 60mm atas ram lah bro

Don't say like that bro, itu twinmos ram is a special case, performance wise it blows our bling2 ram to kingdom come   

Haven't try 1.9V with it
But 800mhz 4-4-4-12 rated at 2.0v

Anyway, I've ditch it off and put back my OCZ Reapers, 1066Mhz with 2.1v no problems. Just warm to the touch

guys, having troble here! im using windows 7 64 bit, my rig as in the siggy below, OCing my proc, this is the max i can go
http://s.lowyat.net/uploads//attach-14/pos...-1278896517.jpg
http://forum.lowyat.net/topic/1003744/+240#entry34907871
http://valid.canardpc.com/show_oc.php?id=1290656
but i still cant stabilize 4GHz of OC, tried CPU-NB voltage of 1.45v, cpu voltage at 1.52, even NB volt i pump to 1.20v, still cant get it stabilize during priming, tried every combo at a very high voltage(all combo except HT link speed n voltage and also the HTT coz im using BE proc). im using c3 revision proc, so i dun think my proc just can go an more higher, izzit because of the windows im using(64-bit) ?

btw my mobo bios setting has a very weird HT link setting, it only offer me to tweak the speed(400MHz - 2.6 GHZ), no option to tweak the 200Mhz default HT link, and also no option to increase of decrease the HT link voltage.

Tracer definitely still can go higher

Hmmm still not sure if the newer DDR3 tracers are also like that

The non LED ones are okay
Just the LED 1s are the 1s to look out for
Definitely need active cooling

ah_khoo, that time you run it at 2V or 2.1V?

so whats the max with ddr 3..... especially 1600 ?

4ghz temps max load is like around 65 C, izzit not stable bcoz of the temps?

Aiyohhhh really hard to get 55c for 4ghz, even with the Noctua i'm using on push/pull also sooo hard..
Been reading a few articles about HSF and got me thinking if the high temp is because of the design of HSF not being so compatible with AMD chips like maybe the heatpipe orientation or something..

Luis Vutton? Cetak rompak or original bro?

Yup, its true, it's really noticeable when u turn off load line calibration for the cpu, just imagine having ur cpu overvolt on idle & undervolt during load     

mobo apa la tu..
beli la ram canggih..

Eh only XMP profile meh? No BMP for AMD? Sayangnyer   

nice stuff you got there unker

You are too flatter on me which mean tonight I can't sleep early.. 

Try my best ya.. If finish pass u tomorrow at SLS, pm me ur number in vr. 

I will be there most probably before 1130pm.. By the time I SMS you im will be on my way from AMK to SLS..

DDR3 meh? U modified ur 690G mobo eh to make em fit eh? Hahahahaha :/P
fuyooohhhh somebodi got chance to play2 with new rams la pulak..  :/drool:  :/drool: