ei hynix dt d43 and bt d43 can still get 1 pc fair i see lots of it!

rzone...no money for the TCCD la...expensive noe,dekat 1K for TCCD's. Owch!

darkmage12,which PC fair you found those D43's?
AFAIK,the recent one at PWTC orang semua say no D43 wor??

DTD-43 is still can be found in LYP if i'm not mistaken but only for 512x2
but its nearly impossible to hunt em now.

@pizzaboy how bout googling Hynix DTD-50 its perform nearly similar to
TCCD but the brand using DTD-50 is not marketing their product here in
Malaysia such as Gskill and OCZ. and the price is a bit cheaper than those
TCCD.
BTW since UTT is easily can be found so still the best things to grab is UTT
but it will be great if can find DTD-50

u need at least a vdimm of 3.3v to drive the UTT

not to worrrryyyyyy........DFI's to the rescuE!
but darn,that's mighty sick. 3.375V for 255FSB @ 2-2-2-6

Is that a 24/7 setup rlhc17?

pizzaboy i go penang de pc fair dunno mayb is chiong 1 la

got 4*512

and btw got a stupid shop person say dfi lousy i tell him unless u plain stupid or u dunno anything bout computers!

http://www.anandtech.com/memory/showdoc.aspx?i=2215

then u should be thinking bout Hynix DTD50 like he mention i think
and the price cheaper than tccd

damn now i run ddr400 512*2 dt+bt D-43

at 210*11 with barton 2500+

ram timming 3-3-3-11 2.8v

anything i can do to go higher?

i think nobody can give u correct answer, all at all u have to try by urself, normall u will get 250fsb 2.7-2.9vdimm. good luck : )

220 can boot,,,,,,but then play cs about 15 minutes then pc reboot!

okay maybe it's time to push more v to 2.9!

try cpc off..
maybe issues of double sided rams

This post has been edited by e-jump: Apr 5 2005, 03:12 PM

dual channel? prob! hell no!

hmm... double sided is not dual channel bro

yep double sided ram always have problem when running 1t compared to
single sided chip. thats why i prefer 256x2 rather than 512x2 when buying value ram. but if ur on high performance ram i dont think such a problem will be bugging u.

Can show how thw dimples look like with pic or diagram ? Appreciate it.

Thanz.

hope u can see it clearly.


Attached thumbnail(s)

Hi rzonealley,

Thanks . I can manage to spot the dimples after I manified it abit.
So instead of winbond U sholud see the word Kingston , is that correct ?

nop. u will exactly see the writing winbond unless its relabeled then u just can see the dimples only and other writing.

If it's Kingston or Corsair chip, just ignore the label if u saw the two dimples

Anyway.... about the new hynix chips, is it DTD50, or is it DT-D50 (correct code typing plz). Isn't that D50 indicates 5ns, while D43 indicates 4.3ns? Or I could be wrong? Or maybe the D50 can perform with tighter timings? The anandtech review did not provide much useful info in comparison of overclocking result, it's just show performance benchie there.

Hi soulfly,

Thank you.

I think you are correct although stands to be confirmed. The D43 likely indicates the chips capacity , 4.3ns.

Btw I just got mine from PC Depot in Penang double sided 512mb Hynix DT-D43 chips at RM172 per stick.

Will test it tonite.