Can show how thw dimples look like with pic or diagram ? Appreciate it.

Thanz.

Hi rzonealley,

Thanks . I can manage to spot the dimples after I manified it abit.
So instead of winbond U sholud see the word Kingston , is that correct ?

Hi soulfly,

Thank you.

I think you are correct although stands to be confirmed. The D43 likely indicates the chips capacity , 4.3ns.

Btw I just got mine from PC Depot in Penang double sided 512mb Hynix DT-D43 chips at RM172 per stick.

Will test it tonite.

Hi,

I tested mine 2x512mb, dt-d43. When running 1 stick alone can do 225mhz@ 3338 with 2.8vdimm, it could pass memtest 3 passes at least. But when running on dual it shows errors even in the 1st pass. I read someway ealier it 'cause the double sided thingand not happy with nf7s ??? I am now using them at 200mhz with 2.8 vdimm.

I think ddr ram is going up and read that in China web sites yesterday.

What mobo U using ? Mine, nf7sv2 has problem running dual channels on 2x512mb vene at ddr 400mhz no matter what I tried. Tried some Titac and Merlin mod bios too.
No help . But I can run them separately and reached 235 mhz at 2.8 vdimm. Now on single chan. 2x512mb.

Yah,

Just use the 1st two slots nearest to the cpu. I've done th same thing like U , n test 1 by 1. I'm more or less confirm it's the issue of the chips not ddr. For single I can't get pass 240mhz. @2.9vdimm

Now using Merlin , D26 cpc disabled dated 9-2004 if I rememberit correctly.Anyway, this is the latest I can find.U mentioned the cpc beforebut doesn't seem to work for me. May be I have missed out something. Will try benching them again tonite.

BTW I have mine L12 mode with wire on socket, possible cause ? Thank you.

I tried all mod bios Merlin, Tictac and Trats , cpc-on/off or T=1/2 , all not working for dual chanl even @ 200 mhz (DDR400) .
My memory can do 235 mhz at single 2x512mb at 3,4,4 ,11 .I think it's my mobo.

I'll tried those older mod bios , they may help eg. D10 .