my ct is 1 lor
y any suggestion
now my target to buy ocz platinum

Err.. don't understand what you're trying to say. Can you be more specific ? Thanks.

sorry for not including details .. huhu

currently stable at :
CPU - 240x10 = 2.4Ghz @ stock vcore
Ram - 200Mhz @ 2.5-3-3-7 @ CPU/12 divider at 2.6V (Stock volt)
Prime95 9 hours = pass.
Memtest (run from boot disk) 1 hour+ = pass
3dmark 03 n 05 - no problems

unstable / failed prime95 :
CPU - 245x10 = 2.45Ghz @ stock vcore
Ram - 204Mhz @ 2.5-3-3-7 n 3-3-3-8 @ both 2.6v n 2.7
Memtest 1 hour+ - Passed
Prime95 - Failed after 15 minutes.

i tried all those settings above for the ram. so wondering if its cos the vcore isnt enuf.. or ram timings.. ? seems like anything above 200Mhz for the rams will fail prime95 eventually. only diff is how long it can run without errors.

any suggestions? OC newbie here

Up VDIMM to 2.8v and up VCORE by 10%, see how it goes

now;

3200+ @ 2.5Ghz
bt-d43 @ 208Mhz @ 3-3-3-8
vcore @ 1.45
vdimm is at 2.7V

how much is the lowest timings i can put on the bt-d43's? wanna test if my cpu can go higher at looser timings.

at 2.5Ghz, Passes superpi n gonna run prime95 till tomoro morning.

EDIT: just found out my Vdimm value

This post has been edited by plankton: Jun 15 2006, 12:33 AM

tras of 10 makes no difference to me. guess it's limit for my pair of hynix... guess my old corsair is better @ 245 2.5-4-4-8 (relabel chip though) hahaha

anyway.. i've plenty of sealed new ctp-d43 around hehhe

You can try 3-4-4-x and see how high your d43 can fly.

bought Apacer 512MB dt-d43 + BrainPower pcb(B6U808) just for fun yesterday..
still burnin' and this is done @ 2.75Vdimm on i865PE..

Nice for a start. Where did u bought it ? Tight timings i should say and its normal for a DT's series of D43.

Shuttle XPC

AMD Athlon 64 3000+ @ 2.25GHz 1.4v(250HTT is max of this mainboard..)
KVR DT-D43 512MB DDR400 x2 (250@3-3-3-8 at 2.8v)

mebi this wan OT ady, but need to ask
wat the new Hynix chippy arr??
izzit CT-D43 & how the OC ability??

ct-d43 not produce as well in oc
mine use 1gb ct-d43
bassically i oc my cpu
amd 2800 754(2.4ghz) oc 37%
timing ddr 333 2.5.3.3.6
ct 1t
loose ur speed 333

hey guys... has anyone tried overclocking a double sided ctp-d43 on bp pcb as sold here?? pls post the clocks, timings and vdimm .If it clocks well maybe i'll be buying from ndextreme...many thanks!

my spec is AMD semp 64 2500+
asus k8n

my ram using 1 x512 BT d43 + 1 x 512 CTP d43 single side ,
both is kingston .

i found tat my CTP cant clock more than 217 at 3-3-3-8 1T 2.7~2.8 and 225 at 3-3-3-8 2T. even i set to 3-4-4-10 also useless.

i must put my BT d43 and dimm1 . else the system cant boot in windows.

i feel weird tat if i using default clock and timing , it also unstable . when loading , if will restart. so the only stable state for my ctp only is 217@3-3-3-8@1T@2.7V..... must clock if not unstable....

my BT only can reach 245@3-3-3-8@1T@2.8V , how to let it go higher FSB ?
*both ram also cant do CL 2.5..

anyone have idea to let the ram go higher clock ? the lossen timing for the d43 ? thx

i think ctp is like that. on my 2 AMD64 and Athlon oso cannot do well...

using RAMs wif diff chippy r not recommend in OC'ing else, might result bad achivement

but if i put ctp only , my pc can boot but when run any program will restart.
no matter wat i do also give me same result. even i dun clock it also same.
i think the only way is sell the ram.

any ram suitable for me?
can do 230@tight time , or can do very high clock.
but my budget <RM350 ..
any value ram intro ?
and the samsung tccc , or kingston hyper x , which 1 better ?

there was alot performance RAMs out there that suit for u.
its not the matter of brand but more to type of chippy they used for the RAMs.. samsung chipset r superb when u want it running on lower voltage at higher HTT/ FSB.

thx for answering , low voltage suit my mobo , if not now maybe using bh5 already.
nowadays the chip almost remark , i cant read the code , so wat should i do ?

remark?? lol, u can still read the chipset wat. nuthin' hard