Outline ·
[ Standard ] ·
Linear+
Hynix RAM Discussion
|
newbieockids
|
 Dec 30 2005, 02:21 AM
|
|
QUOTE(x800 @ Dec 29 2005, 09:53 PM) hurm..i have a question ere bout heat from these KVRs.i just added 2 more modules, so now im running 4xBT-D43s modules (256MB each) at 2.85V..the question is,do i need heatspreaders?i've touched the rams after i shut my pc down, and it feels kinda warm..currently i only have a 12cm fan at my side panel blowing to the modules n cpu.. r u running them at stock speed?.. warm?.. i think u dun need that.. i believe someone can't touch their ram even for less than 1 seconds..  This post has been edited by newbieockids: Dec 30 2005, 02:21 AM |
|
|
|
|
|
newbieockids
|
Jan 2 2006, 04:05 PM
|
|
|
hye guys.. im in lowyat plaza rite now.. just found KVR 512 dd400 with infineon be-5.. is this chipset good?.. if good i might grab 2 stick right away.. need a quite fast reply here..  thanx in advance..  |
|
|
|
|
|
newbieockids
|
Jan 2 2006, 04:33 PM
|
|
|
QUOTE 12. pcxperp | 2x1GB Crucial Ballistix Tracer - Micron -5B D | 3-3-3-8 1T @ 270MHz | 2.7v | Link! - SPi 32M Stable: Yes
12. platty | 2x1GB Crucial Ballistix Tracer - Micron -5B D | 3-3-3-8 1T @ 270MHz | 2.7v | Link! - SPi 32M Stable: Yes
12. JNav89GT | 2x1GB Mushkin XP 4000 - Samsung UCCC | 3-4-4-8 1T @ 270MHz | 2.8v | Link! - SPi 32M Stable: Yes
13. Gundamit | 2x1GB Patriot PC3200 LL - Infineon BE-5 | 2.5-3-2-6 1T @ 265MHz | 2.75v | Link! - SPi 32M Stable: Yes
13. Cashman | 2x1GB Crucial Ballistix - Micron -5B D | 3-3-3-8 1T @ 265MHz | 2.7v | Link! - SPi 32M Stable: Unknown
14. Vapor | 2x1GB Crucial Ballistix - Micron -5B D | 3-3-3-8 1T @ 263MHz | 2.6v | Link! - SPi 32M Stable: No
15. Professor12 | 2x1GB Mushkin Hi-Perf Blue - Infineon BE-5 | 2.5-3-3-6 1T @ 262MHz | 2.7v | Link! - SPi 32M Stable: Yes
16. varzmaster | 2x1GB Corsair ValueSelect VS1GB400C3 - Infineon BE-5 | 3-4-3-7 1T @ 260MHz | 2.8v | Link! - SPi 32M Stable: Yes
17. NinjaWreck | 2x1GB Mushkin Hi-Perf Blue - Infineon BE-5 | 2.5-3-2-6 1T @ 258MHz | 2.9v | Link! - SPi 32M Stable: Yes
18. rise4310 | 2x1GB Mushkin Hi-Perf Blue - Infineon BE-5 | 2.5-3-3-8 1T @ 257MHz | 2.75v | Link! - SPi 32M Stabe: Yes
19. CP-Geek | 2x1GB Corsair CMX1024-3200C2 v1.2 - Infineon BE-5 | 2.5-3-2-6 1T @ 255MHz | 3.0v | Link! - SPi 32M Stable: Yes
20. psycho303 | 2x1GB Corsair CMX1024-3200C2 v1.2 - Infineon BE-5 | 2.5-3-2-6 1T @ 251MHz | 2.8v | Link! - SPi 32M Stable: Yes source extremesystem.org --> herefrm the infineon be-5 result, some good and some not.. izzit a good decision if i buy this ram guys?.. |
|
|
|
|
|
newbieockids
|
Jan 2 2006, 09:16 PM
|
|
|
QUOTE(soulfly @ Jan 2 2006, 05:40 PM) it depends on the pcb also
that's why u see the premium ram with be-5 performs better than the ordinary ones i'd bought it already..  neway the pcb look like the chapalang one.. i guess i need to burn it 1st.. hopefully i'll got good result.. thanx soulfly for the reply.. i really appreciated it.. |
|
|
|
|
|
newbieockids
|
Jan 5 2006, 02:25 AM
|
|
|
 KVR 512 PC3200 with Infineon BE-5 on stock @ 1T.. consider good or not guyz?..  ---------------------------------------------------------------------------------------------------- update with ddr420  This post has been edited by newbieockids: Jan 5 2006, 03:03 AM |
|
|
|
|
|
newbieockids
|
Jan 6 2006, 10:56 PM
|
|
|
QUOTE(-vip3rleon9- @ Jan 6 2006, 10:10 PM) hey guyz.. just got my KVR DT-D43's.. haha.. feelin very happy.. but i have a problem though.. if i put my fsb to 240, it won't load windows, but when i lower my fsb to 239, everything starts normally..  maybe its the limit already for that timing 3-3-3-8(frm ur sig)..  loose the timing to 3-4-4-8 to see how high the fsb ur ram capable to do.. |
|
|
|
|
|
newbieockids
|
Jan 7 2006, 12:50 AM
|
|
|
QUOTE(-vip3rleon9- @ Jan 7 2006, 12:01 AM) yaya im also interested with the answer for this question.. never use amd64 tweaker b4.. just play around with the bios only.. i guess every changes made there need rebooting rite?.. |
|
|
|
|
|
newbieockids
|
Jan 7 2006, 04:05 AM
|
|
|
QUOTE(e-jump @ Jan 7 2006, 02:14 AM) the only u cant change thru a64 tweaker is CAS latency n command rate T basically A64 optiobs r similar to the options in DFi memory options juz it work like clockgen, where u test in window, n if its ok, than u apply in bios.. well, u can straight away set in bios, its about the same.. but the advantage of this tweaker is for those other mobo that dont have bios options like dfi  QUOTE(KilJim @ Jan 7 2006, 03:08 AM) if u have those settings in your bios, use that instead of Tweaker
sometimes even if your rams can take the setting it hangs up when u change via Tweaker
same goes for all other OCing software la actually rite got the point.. thanx guyz.. i guess there is another a64 tweaker pros.. to share ur dram setting easier..  |
|
|
|
|
|
newbieockids
|
Jan 7 2006, 07:56 PM
|
|
|
QUOTE(jiant @ Jan 7 2006, 01:20 PM) as i know that got some fake hynix chipset..even wif the correct code..how to identify?by eye looking..
also
any software can use to check...is it accurate? how did u know?.. any source/link maybe?.. if really does, i believe no software out there can be use to check them out.. by eyelooking will do.. normally hynix code is like HYXXXXXXX BT/ DT/ CT/ TP- D43/ D5 |
|
|
|
|
|
newbieockids
|
Jan 15 2006, 09:16 PM
|
|
|
QUOTE(-vip3rleon9- @ Jan 15 2006, 08:46 PM) hey guyz!! i followed ur advice's but i still can't up my fsb to 240> leh..  like i said, if i put it at 239*9, it's okay.. but anything higher than that eg. 240*9, windows won't boot.. even after i have loosen my timings to 3-4-4-8, windows still can't boot.. help pls.. thanx. -vip3rleon9- maybe it isnt ur luck?.. hittng the wall already i guess.. the pcb that ur dt-d43 use might cause dat.. |
|
|
|
|
|
newbieockids
|
Jan 15 2006, 10:08 PM
|
|
|
QUOTE(-vip3rleon9- @ Jan 15 2006, 09:34 PM) yeah.. i have no idea why it won't go up.. could it be caused by my mobo?? the ram can surpass 240 on other system b4?.. have u tried?.. |
|
|
|
|
|
newbieockids
|
Jan 15 2006, 10:26 PM
|
|
|
QUOTE(-vip3rleon9- @ Jan 15 2006, 10:14 PM) nope i have not tried it yet as i do not have any other mobo's.. cuz before this, my ram was kvr (dunno what chips) n i when i put 240*9 then restart, then the mobo will start to beep.. haha.. now even i put 245*9 mobo still don't beep but i just can't load windows that's all.. help me pls... haha.. thanx.  -vip3rleon9- i believe the ram itself hit the wall already if u've tried to loose the timing to 3-4-4-8 and increase Vdimm to 2.9 b4 and still cannot.. |
|
|
|
|
|
newbieockids
|
Jan 15 2006, 10:36 PM
|
|
|
QUOTE(-vip3rleon9- @ Jan 15 2006, 10:28 PM) no la. i have not tried to up the vdimm to 2.9.. highest i've gone is 2.7.. u think by setting it to 2.9 will allow my windows to boot?? -vip3rleon9- that is the maximum Vdimm for dt-d43.. u might want to trty em.. |
|
|
|
|
|
newbieockids
|
Jan 15 2006, 10:43 PM
|
|
|
QUOTE(-vip3rleon9- @ Jan 15 2006, 10:38 PM) confirm wun burn the chips right?? sry a i quite paranoid.. i'll try it after i get back from school tomorrow.. haha.. 3-4-4-8 @ 1T @ 250mhz is my target.. so i'll try 250mhz @ 1T @ 3-4-4-8 @ 2.8V tomorrow k? is this set-up good?? -vip3rleon9- not burn la mate.. yaya good edi.. |
|
|
|
|
|
newbieockids
|
Jan 15 2006, 11:00 PM
|
|
|
QUOTE(-vip3rleon9- @ Jan 15 2006, 10:59 PM) okok.. thanx man.. i'll let u guyz know tomorrow if it's sucessful ya.. haha.. wish me luck guyz..  -vip3rleon9- good luck dude.. |
|
|
|
|
|
newbieockids
|
Jan 16 2006, 04:10 PM
|
|
|
QUOTE(-vip3rleon9- @ Jan 16 2006, 03:46 PM) haha.. thanx.. but that didn't seem to help leh.. haha.. i tried adi just now.. 240mhz @ 2.8vdimm @ 1T @ 3-4-4-8 245mhz @ 2.8vdimm @ 1T @ 3-4-4-8 250mhz @ 2.8vdimm @ 1T @ 3-4-4-8 all also cannot.. can reach the Windows boot screen, where the horizontal bar moves across the screen.. it will just keep moving and moving n not load into Windows.. how leh.. -vip3rleon9- 2T no diff also?.. maybe that is the limit then..  |
|
|
|
|
|
newbieockids
|
Jan 17 2006, 10:32 PM
|
|
|
value ram nowadays is very2x unpredictable.. yeah i read it sumwhere here.. a forumer, wadieq, hit DDR 600 with KVR DT-D43.. |
|
|
|
|
|
newbieockids
|
Jan 19 2006, 10:35 PM
|
|
|
QUOTE(chickenducksoup @ Jan 19 2006, 10:13 PM) >2.5-2-2-7 333mhz
>3-4-4-8 400mhz
which 1 faster?
got any benchmark software 2 test this kind of situation?
thank Google for Sisoft Sandra.. Once u've install them, run the memory bandwith benchmark.. |
|
|
|
|
|
newbieockids
|
Jan 26 2006, 02:11 AM
|
|
|
QUOTE(StarNet @ Jan 26 2006, 01:56 AM) erm... so that means u put tighest timing which enuf to boot to dos rite ? erm.. u sudden change all to 2-2-2-x... it won't auto reboot or hang etc ? memtest at dos can change vdimn anot ? or u use lowest vdimn to burn in aso ? i dun think u can change the Vdimm in memtest.. u need to go back to ur bios option page.. |
|
|
|
|
|
newbieockids
|
Feb 2 2006, 09:48 PM
|
|
|
QUOTE(Mr.LKM @ Feb 2 2006, 07:15 PM) I think it's just TP-D43. otherwise CT-D43.. so which one?.. |
|
|
|
|
Quote
0.9475sec
0.54
7 queries
GZIP Disabled