* offtopic :

why my OC'ed kvr only stable until 225 FSB? after tat PC going to hang/ automatic re-start oso kenot boot.

the timing is default one. i never modify it. just pushing step by step until max FSB. the max is 226 FSB error-less & benchable. might prob at vdimm as i have not increase it. mine is double sided ddr400.

This post has been edited by gengstapo2: Apr 18 2005, 01:58 PM

wahaa.. edi tell u what? its the DT-D43 is better bet than CVS RAm

same only when u using ur CVX last time

what is ur current cpu clock speed?
RAm tmming, Vdimm?

lit dat then need answer from sifus here. im oso facing serious incompatiblity wif my system, between RAM & mobo..
dunno wat the problem. now running using the el-cheapop RAm

i dont thinks so larr. some ppl here find tat new batch of BT & DT are not really clockable chipset.

izzit nescesary to run memtest?? coz i experience running at default setting around 2 hours but no error found. when time to loading windows, BSOD al the time

i think u need to use divider since ur RAm kenot do 1:1 at high FSB
using divider able to get higher clock speed

wakakaa..
KVR able to handdle up to 3.3V. u can see the voltage from its sticker there.
better use the heatspreader rather than ramsink. any brand can make but i recommended those Vantec or CM heatspreader

nahh.. plss read carefully wat im talking bout. its not neccesary to OC ur KVR in order to run them well. wat i need to know "is the important of memtest"..

lol.. if im not mistaken, those DT chips OC lower compared to BT but able to handdle tight timming than BT

correct me if im wrong..

wat is the highest ever this BT-D43 can go?? last nite just tried it out & currently i can get 275HTT x10@ 1CPC, vcore 1.5 & vdimm 2.7.. but then i kenot dare to push my processor vcore higher since i stressing it already reach 59c cpu temp

ps : it was made by Kingston in year 2001 & another in 2003. currently running at 270Htt x10, timming 3-4-4-8@ DDR450, vdimm 2.7(2.6 kenot boot)

This post has been edited by gengstapo: May 19 2006, 09:24 AM

wahaa.. any comment wif my BT-D43 chippy??



brand : KVR
chippy : Hynix BT-D43
Speed : 280HTT x10@ DDR466
Timming : 3-4-4-8@ 1T CPC
Dram voltage : 2.7v(bare)

thanks bro
actually im more interested wif the vcore. my lastime opty 170 can do onli 2.66Ghz@ 1.5v which i think the vcore is high enuff for an opty family. got this 146 after sold-out my 170

yeahh.. u got me ady. mine max can reach onli 2.7Ghz@ 1.5v
so, i dont think its a gud setup running for 24/7. wif my current 146, i can clocked is to 2.85Ghz@ 1.37v, 24/7. only limitation of my RAMs actually since when i try higher, even raise the vcore, its still unstable. like u mentioned earlier, BT-D43 might clock highest at 285HTT probably.

well, my desired kenot be fulfill wif 2.7Ghz. itchy to touch 3.1Ghz barrier. hope my incoming samsung base RAMs can help me-out.

mebi this wan OT ady, but need to ask
wat the new Hynix chippy arr??
izzit CT-D43 & how the OC ability??

using RAMs wif diff chippy r not recommend in OC'ing else, might result bad achivement

there was alot performance RAMs out there that suit for u.
its not the matter of brand but more to type of chippy they used for the RAMs.. samsung chipset r superb when u want it running on lower voltage at higher HTT/ FSB.