Hi Sifu,
Is below quotation sound reasonable?

1 ) To supply and install Mild Steel Door Grille       
      @ outer frame 25mm x 50mm x 1.2mm RHS       
      @ horizontal design with 19mm x 19mm x 1.0mm SHS @ gap 4" +/-       
      - 3.5' x 8' ( Main Door )      ---> 28Sq.ft  RM 11.00Rate/sf  RM 308.00
      - 13.5' x 8' ( Living Hall )    ---> 108Sq.ft  RM 11.00Rate/sf RM 1,188.00
       
2 ) To supply and install Mild Steel Window Grille       
      @ outer frame 19mm x 19mm x 1.0mm SHS       
      @ horizontal design with 19mm x 19mm x 1.0mm SHS @ gap 4" +/-       
      - 2' x 5' ( Kitchen )    --->  10Sq.ft  RM 8.00Rate/sf  RM 80.00
      - 2' x 5' ( Kitchen )    --->  10Sq.ft  RM 8.00Rate/sf  RM 80.00
      - 2' x 5' ( Kitchen Bathroom )  --->  10Sq.ft  RM 8.00Rate/sf  RM 80.00
      - 4' x 5' ( Guest Room )  --->  20Sq.ft  RM 8.00Rate/sf  RM 160.00
      - 4' x 5' ( Bedroom Left )  --->  20Sq.ft  RM 8.00Rate/sf  RM 160.00
      - 2' x 5' ( Bedroom Left Bathroom ) --->  10Sq.ft  RM 8.00Rate/sf  RM 80.00
      - 4' x 5' ( Bedroom Right )  --->  20Sq.ft  RM 8.00Rate/sf  RM 160.00
      - 2' x 5' ( Bedroom Right Bathroom ) --->  10Sq.ft  RM 8.00Rate/sf  RM 80.00
      - 5' x 2' ( Master Bedroom Bathroom )  --->  10Sq.ft  RM 8.00Rate/sf  RM 80.00
       
3 ) To supply and install Mild Steel Window Grille       
      @ outer frame 25mm x 25mm x 1.0mm SHS       
      @ horizontal design with 19mm x 19mm x 1.0mm SHS @ gap 4" +/-       
      - 9' x 9.5' ( Master Bedroom )  ---> 85.5Sq.ft  RM 9.00Rate/sf  RM 769.50
       
4 ) Powder Coated Plain Colour ( Sand Surface ) for Mild Steel Door & Window Grille ---> 341.5Sq.ft  RM 2.50Rate/sf    RM 853.75
       
5 ) Upgrade 22mm x 38mm x 1.6mm Angle Bar frame as window grille frame mix silicon ---> 341.5Sq.ft  RM 1.00Rate/sf    RM 341.50
    for the part can't do with Angle Bar & 3mm Solid Flat Bar as door grille skirting       
       
6 ) St Guchi Handle Lock Set for Mild Steel Main Door Grille  --->  80.00/set  RM 80.00
       
7 ) To supply and install Mild Steel Door Grille       
      @ outer frame 25mm x 50mm x 1.2mm RHS       
      @ horizontal design with 19mm x 19mm x 1.0mm SHS @ gap 4" +/-       
      @ Add 1.2mm Metal Plate For Kitchen Botton part ( 48" ( H ) )       
      - 3' x 8' ( Kitchen )                                          ---> RM 344.00
      - 3' x 8' ( Kitchen ) Powder Coated                          ---> 24Sq.ft  RM 5.00Rate/sf    RM 120.00
      - 3' x 8' ( Kitchen ) 3mm Solid Flat Bar Skrting        ---> 24Sq.ft  RM 1.00Rate/sf    RM 24.00
       
8 ) To supply and install Mild Steel Polycarbonate       
      @ outer frame with 38mm x 38mm x 1.2mm SHS       
      @ 2.5mm Solid Embossed Sheet       
      - 17' ( W ) x 4' ( L )                                          ---> 68Sq.ft  RM  0.00    RM 1,360.00
      - 17' ( W ) x 4' ( L ) ( PC Sand Surface Dark Grey Colour ) TK-7024      ---> 68Sq.ft  RM 2.50    RM 170.00
      - 8' ( W ) x 8.5' ( L )                                          ---> 68Sq.ft  RM 20.00    RM 1,360.00
      - 8' ( W ) x 8.5' ( L ) ( PC Sand Surface Dark Grey Colour ) TK-7024      ---> 68 Sq.ft  RM 2.50    RM 170.00

Total          RM 8,040.00
6% GST  RM 482.40
Sub Total  RM 8,522.40

from the format, looks like from 3Kim? 

Is 3Kim good ? I am looking for grille installation too.

I find 3kim really expensive nowadays.

I used them before some years back and they were fine but recently I had a pretty big job which cost in the region of +/- 10k and instead of just handing it over to 3kim I decided to call a few and compare.

3kim was easily the most expensive and the difference was closer to RM2k more expensive than the rest.

probably the material/thickness/finishing added up the costs?

Well 3kim were the first I got the quotation from and being a 3kim customer before you should know how detailed their itemized quotations are.

I took the exact same specs on their quotation including exact measurements/material/thickness/finishing and gave it to other vendors and not only were their estimate quotations cheaper, after onsite assessment, even cheaper after negotiating with them. FYI their not run of the mill steel vendors but those as big as 3kim as well with own factories etc.

Tried to negotiate with 3kim for a better price but guess how much discount they give from quoted price? Rounded down RM40 for a >RM10k job    My as well don't give any discount man.

I find 3kim really expensive nowadays.

I used them before some years back and they were fine but recently I had a pretty big job which cost in the region of +/- 10k and instead of just handing it over to 3kim I decided to call a few and compare.

3kim was easily the most expensive and the difference was closer to RM2k more expensive than the rest.

The claim amount have to attach receipts or proof of existence.

The sum insured when I buy that time I have the total cost of everything. So I just need to differentiate the fixtures and content and buy accordingly.

Hi Rapple,
Did you provide original receipts or a softcopy (scanned copy) will do?

Hi guys... i looking fot main door grille. Anyone got contact? ? Thanks

Hi Sifus,

may i know how much this kind of grille will cost? just a simple one..
12 ft (W) x 4 ft (D) x 11 ft (H)
comes with a grille door..

Sory for my bad drawing.

homedec is coming soon at klcc apr28-may1.. go there and compare suppler for material and get quote on the spot..

Well 3kim were the first I got the quotation from and being a 3kim customer before you should know how detailed their itemized quotations are.

I took the exact same specs on their quotation including exact measurements/material/thickness/finishing and gave it to other vendors and not only were their estimate quotations cheaper, after onsite assessment, even cheaper after negotiating with them. FYI their not run of the mill steel vendors but those as big as 3kim as well with own factories etc.

Tried to negotiate with 3kim for a better price but guess how much discount they give from quoted price? Rounded down RM40 for a >RM10k job    My as well don't give any discount man.

Hi,  Anyone has good grille supplier contacts beside 3kim ? Need to do window grilles.

noted. thanks alot!